Manual Pengguna

1. Pengenalan

The Versonel Nightwatcher VSL90 is an advanced outdoor LED floodlight designed for security and deterrence. It features a patented robotic motion sensor that tracks movement across a wide detection zone, illuminating and following any detected activity. This manual provides essential information for the safe and effective installation, operation, and maintenance of your Nightwatcher VSL90.

2. Maklumat Keselamatan

Sila baca semua arahan dengan teliti sebelum pemasangan dan penggunaan. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau bahaya lain.

• Keselamatan Elektrik: This unit requires hardwiring to a 100-240V electrical supply. Installation should be performed by a qualified electrician or a person with adequate knowledge of electrical wiring to prevent electric shock.
• Pemutusan Kuasa: Sentiasa putuskan kuasa pada pemutus litar sebelum memasang, menservis atau membersihkan lekapan.
• Pemasangan: Pastikan permukaan pemasangan kukuh dari segi struktur dan dapat menampung berat lekapan.
• Penggunaan Luaran: The VSL90 is weatherproof (IP65 rated) for outdoor use. Ensure all connections are sealed properly to maintain water resistance.
• haba: The LED light source can become hot during operation. Do not touch the light fixture immediately after it has been on.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Nightwatcher VSL90 Light Fixture
• Pendakap Pemasangan Universal
• Light Fixture Mounting Screws
• Skru Pemasangan Kotak Simpang
• Penutup Skru Hiasan
• Gasket EVA
• Kacang Kawat

4. Produk Lebihview

The Versonel Nightwatcher VSL90 integrates a powerful LED floodlight with a sophisticated motion detection and tracking system.

Rajah 4.1: Depan view of the VSL90 light fixture, showing the LED panel and the spherical PIR sensor below.

Rajah 4.2: sebelah view of the VSL90, illustrating the adjustable light head and the integrated control panel on the side.

The unit features a 1700 Lumen LED light source and three integrated Passive Infrared (PIR) sensor zones. These sensors detect movement up to 39.37 feet (12 meters) across a 210-degree horizontal detection zone. Upon detection, the light automatically rotates to follow the movement, illuminating the area and creating the impression of being watched.

Rajah 4.3: Illustration of the VSL90's 210-degree detection zone and range, covering a wide area around a property.

Rajah 4.4: Visual representation of the VSL90's robotic movement tracking feature, where the light follows detected motion.

5. Persediaan dan Pemasangan

The VSL90 is designed for easy outdoor installation, replacing an existing floodlight fixture or adding to any location with electrical wiring. This unit must be hardwired.

5.1. Langkah Pra-Pemasangan

1. Putuskan Kuasa: Matikan kuasa ke kawasan pemasangan di pemutus litar.
2. Sediakan Kotak Persimpangan: Ensure you have a suitable 4-inch diameter electrical junction box (not included) for mounting.
3. Bongkar: Keluarkan semua komponen dari pembungkusan dengan berhati-hati.

5.2. Arahan Pemasangan

Rajah 5.1: Meletup view of the VSL90 installation components and wiring connections.

1. Attach Universal Mounting Bracket (E): Secure the universal mounting bracket to your electrical junction box using the provided junction box mounting screws (D). Ensure the bracket is oriented correctly.
2. Install EVA Gasket (F): Place the EVA gasket over the universal mounting bracket. This helps seal the fixture against moisture.
3. Wire Connections (G): Connect the household wiring to the light fixture wiring using the provided wire nuts (G). Typically, this involves connecting live to live, neutral to neutral, and ground to ground. Refer to local electrical codes.
4. Mount Light Fixture (A): Align the light fixture with the mounting bracket and secure it using the light fixture mounting screws (C).
5. Attach Decorative Screw Covers (B): Place the decorative screw covers over the mounting screws for a finished appearance.
6. Pulihkan Kuasa: Setelah pemasangan selesai dan semua sambungan selamat, pulihkan kuasa pada pemutus litar.

6. Arahan Operasi

The VSL90 features a control panel with four switches (SW1-SW4) to adjust its operation. The LEDs (1-4) indicate the current settings.

Rajah 6.1: Terperinci view of the VSL90's control panel, showing the four switches (SW1-SW4) and their corresponding functions.

6.1. Fungsi Panel Kawalan

• SW1 (Sensor L/M/H): Adjusts the sensitivity of the motion sensor.
  • L (Rendah): Reduced detection range.
  • M (Sederhana): Standard detection range.
  • H (Tinggi): Maximum detection range (up to 39.37 feet).
• SW2 (Light On/Off): Controls the light operation.
  • pada: Light will activate upon motion detection.
  • Mati: Light will remain off, but motion tracking may still occur if SW3 is On.
• SW3 (Rotation On/Off): Enables or disables the robotic tracking movement.
  • pada: The light head will rotate to follow detected motion.
  • Mati: The light will illuminate but remain stationary.
• SW4 (Walk Test): Activates a test mode for verifying sensor coverage.
  • When activated, the light will turn on and track movement for a short period, allowing you to walk through the detection zone to confirm coverage.

6.2. Initial Setup and Testing

1. After installation, set SW1 to 'M', SW2 to 'On', and SW3 to 'On'.
2. Activate 'Walk Test' (SW4) and walk through the intended detection area to ensure the sensor covers the desired zones and the light tracks your movement.
3. Adjust SW1 (Sensor Sensitivity) as needed to optimize detection range and minimize false triggers.
4. Once satisfied with the coverage, deactivate 'Walk Test' (SW4). The unit will now operate in its normal mode.

7. Penyelenggaraan

Regular maintenance ensures optimal performance and longevity of your Nightwatcher VSL90.

• Pembersihan: Periodically clean the lens of the LED light and the PIR sensor dome with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• Pemeriksaan: Annually inspect the fixture for any signs of damage, loose wiring, or corrosion. Ensure all mounting screws are tight.
• Kitaran Kuasa: If the unit behaves erratically, try turning off the power at the circuit breaker for a few minutes and then restoring it. This can reset the system.

8. Penyelesaian masalah

Rujuk jadual berikut untuk isu biasa dan penyelesaiannya:

9. Spesifikasi

• Jenama: Versonel
• model: VSL90
• warna: putih
• Sumber Kuasa: Elektrik Bertali
• Voltage: 100-240 Volt
• Jenis Mentol: LED
• Keluaran Lumen: 1700 Lumen
• Julat Pengesanan Maksimum: 39.37 Kaki (12 meter)
• Horizontal Detection Zone: 210 darjah
• Jenis Pemasangan: Lekap di dinding
• Ciri Khas: Motion Sensor, Robotic Movement Tracking
• Rintangan Cuaca: IP65
• Dimensi Produk: 7.04 x 5.51 x 6.49 inci
• Berat Barang: 2.35 paun

10. Maklumat Waranti

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your product packaging or visit the official Versonel weblaman web untuk terma dan syarat jaminan terperinci. Simpan resit pembelian anda sebagai bukti pembelian untuk sebarang tuntutan jaminan.

11. Sokongan

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your Versonel Nightwatcher VSL90, please contact Versonel customer support. Contact information can typically be found on the product packaging or the official Versonel brand webtapak.