1. Pengenalan
The Lorex LR-DL5 RFID Coded Card Access System is designed to provide secure and convenient access control for various indoor environments such as offices and apartments. This device supports both password entry and RFID card/keyfob access, offering flexibility and enhanced security. It is capable of managing up to 1000 unique user cards or keyfobs.
This manual provides detailed instructions for the installation, operation, and maintenance of your LR-DL5 access system. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. Maklumat Keselamatan
- Pastikan bekalan kuasa diputuskan sambungannya sebelum pemasangan atau penyelenggaraan bagi mengelakkan kejutan elektrik.
- This device is designed for indoor use only. Avoid exposure to moisture, direct sunlight, or extreme temperatures.
- Pemasangan hendaklah dilakukan oleh juruelektrik atau juruteknik yang berkelayakan.
- Use only the specified 12VDC power supply.
- Do not attempt to disassemble or modify the device, as this will void the warranty and may cause damage or injury.
3. Kandungan Pakej
Sila semak kandungan pakej untuk memastikan semua item ada:
- Lorex LR-DL5 RFID Coded Card Access System Unit
- 100 x Magnetic Keyfobs
- Skru Pemasangan dan Palam Dinding
- Manual Pengguna (dokumen ini)
4. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Model | LR-DL5 |
| Kaedah Akses | Password, RFID Card/Keyfob |
| Kapasiti Pengguna | Up to 1000 cards/keyfobs |
| Bekalan Kuasa | 12VDC |
| Suhu Operasi | 0°C – 45°C |
| Dimensi (L x W x H) | 120mm x 80mm x 22mm |
| Output Geganti | NO/NC Dry Contact |
| bahan | plastik |
| Pemasangan | Lekapan Permukaan |
5. Persediaan dan Pemasangan
The Lorex LR-DL5 is designed for easy surface-mount installation. Ensure you have the necessary tools (drill, screwdriver, wire strippers) and follow these steps:
- Pilih Lokasi: Select an indoor location near the door where the access system will be used. Ensure it is protected from moisture and direct sunlight.
- Lekapkan Peranti:
Image: The Lorex LR-DL5 unit, a grey plastic device with a keypad and card reader, mounted on a wall.
Mark the drilling points on the wall using the device as a template. Drill holes, insert wall plugs, and secure the device to the wall using the provided screws. - Pendawaian: Connect the 12VDC power supply to the designated power terminals. Connect the NO (Normally Open) or NC (Normally Closed) relay outputs to your electric door strike or automatic door opener, depending on your lock type. Refer to the wiring diagram provided with your specific lock mechanism.
- Kuasa Permulaan: Once all connections are secure, connect the 12VDC power supply. The device will power on, and an indicator light will confirm it is ready for programming.
6. Arahan Operasi
The LR-DL5 offers both password and RFID card/keyfob access. Below are the basic operating procedures.
6.1. Mod Pengaturcaraan
To enter programming mode, press # followed by the master password (default is 123456). The indicator light will change, confirming entry into programming mode.
6.2. Changing the Master Password
- Masuk ke mod pengaturcaraan.
- Tekan 0.
- Enter your new 6-digit master password.
- Tekan # untuk mengesahkan.
- Keluar dari mod pengaturcaraan dengan menekan *.
6.3. Adding User Cards/Keyfobs
You can add up to 1000 user cards or keyfobs.
- Masuk ke mod pengaturcaraan.
- Tekan 1.
- Present the RFID card/keyfob to the reader. The device will beep to confirm successful addition.
- Repeat for additional cards.
- Keluar dari mod pengaturcaraan dengan menekan *.
6.4. Adding User Passwords
- Masuk ke mod pengaturcaraan.
- Tekan 2.
- Enter a 4-6 digit user password.
- Tekan # untuk mengesahkan.
- Repeat for additional passwords.
- Keluar dari mod pengaturcaraan dengan menekan *.
6.5. Deleting User Cards/Keyfobs
- Masuk ke mod pengaturcaraan.
- Tekan 3.
- Present the RFID card/keyfob to be deleted to the reader. The device will beep to confirm deletion.
- Repeat for additional cards.
- Keluar dari mod pengaturcaraan dengan menekan *.
6.6. Deleting User Passwords
- Masuk ke mod pengaturcaraan.
- Tekan 4.
- Enter the 4-6 digit user password to be deleted.
- Tekan # untuk mengesahkan.
- Repeat for additional passwords.
- Keluar dari mod pengaturcaraan dengan menekan *.
6.7. Adjusting Relay Time
The relay pull-in time (how long the door remains unlocked) can be adjusted.
- Masuk ke mod pengaturcaraan.
- Tekan 5.
- Enter the desired time in seconds (e.g., 03 selama 3 saat).
- Tekan # untuk mengesahkan.
- Keluar dari mod pengaturcaraan dengan menekan *.
7. Penyelenggaraan
- Pembersihan: Lap peranti dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut yang melelas.
- Pemeriksaan: Periodically check the wiring for any signs of damage or loose connections.
- Kemas Kini Perisian: No user-performable software updates are available for this model.
8. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Peranti tidak dihidupkan. | Tiada bekalan kuasa atau vol tidak betultage. | Check 12VDC power connection. Ensure power adapter is working. |
| Door does not unlock with valid card/password. | Incorrect wiring to door strike, card/password not programmed, or relay time too short. | Verify wiring connections. Ensure card/password is correctly added. Adjust relay time if necessary. |
| Cannot enter programming mode. | Incorrect master password. | Ensure you are using the correct master password. Default is 123456. |
| Keyfobs not working. | Keyfobs not programmed or faulty. | Ensure keyfobs are correctly added to the system. Test with a known working keyfob. |
9. Waranti dan Sokongan
For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your local Lorex distributor. Keep your purchase receipt as proof of purchase for warranty claims.
Pengeluar: lorex
Tarikh Pertama Tersedia: 3 Januari 2022