1. Pengenalan
Thank you for choosing the Amazon Basics Cordless Rechargeable Screwdriver. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before using the product and keep it for future reference.

Rajah 1: Berakhirview of the Amazon Basics Cordless Rechargeable Screwdriver with key features highlighted, including torque settings, LED light, USB-C charging port, and 1/4" quick change collet.
2. Kandungan Pakej
Ensure all items listed below are present in your package. If any items are missing or damaged, please contact customer support.
- 1 x Amazon Basics 3.6V (4V max.) Cordless Screwdriver
- 1 x Integrated 2000 mAh Lithium-ion Rechargeable Battery (pre-installed)
- 1 x Kabel Pengecasan USB-C
- 1 x 10-piece Bit Set (including various Phillips, Slotted, and Pozidriv bits)

Rajah 2: The complete package contents, showing the cordless screwdriver, USB-C charging cable, and the 10-piece bit set with a bit holder.
3. Maklumat Keselamatan
Sentiasa ikuti langkah berjaga-jaga keselamatan asas apabila menggunakan alatan elektrik untuk mengurangkan risiko kebakaran, renjatan elektrik dan kecederaan diri.
Peraturan Keselamatan Am:
- Keselamatan Kawasan Kerja: Pastikan kawasan kerja anda bersih dan terang. Kawasan bersepah atau gelap mengundang kemalangan. Jangan kendalikan alatan kuasa dalam atmosfera yang mudah meletup, seperti di hadapan cecair mudah terbakar, gas atau habuk.
- Keselamatan Elektrik: Elakkan sentuhan badan dengan permukaan yang dibumikan atau dibumikan (cth, paip, radiator, julat, peti sejuk). Jangan dedahkan alatan kuasa kepada hujan atau keadaan basah.
- Keselamatan Diri: Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. Always wear appropriate personal protective equipment, such as safety glasses, dust mask, non-skid safety shoes, hard hat, or hearing protection.
- Penggunaan dan Penjagaan Alat: Jangan paksa alat kuasa. Gunakan alat kuasa yang betul untuk aplikasi anda. Jangan gunakan alat kuasa jika suis tidak menghidupkan dan mematikannya. Putuskan sambungan palam daripada sumber kuasa dan/atau pek bateri daripada alat kuasa sebelum membuat sebarang pelarasan, menukar aksesori atau menyimpan alatan kuasa.
- Penggunaan dan Penjagaan Alat Bateri: Isi semula hanya dengan pengecas yang ditentukan oleh pengilang. Gunakan alatan kuasa hanya dengan pek bateri yang ditetapkan secara khusus.
4. Persediaan
4.1 Charging the Screwdriver
The screwdriver comes with an integrated rechargeable Lithium-ion battery. Before first use, fully charge the battery.
- Locate the USB-C charging port on the screwdriver (usually at the base or side).
- Connect the provided USB-C charging cable to the screwdriver's charging port.
- Connect the other end of the USB-C cable to a compatible USB power adapter (not included, 5V max. 1A recommended) or a USB port on a computer.
- The charging indicator light (if present) will illuminate during charging and change color or turn off when fully charged.
- Charging is easy via USB anywhere.

Rajah 3: The USB-C charging cable and the 10-piece bit set, essential accessories for the screwdriver's operation and maintenance.
4.2 Installing/Changing Bits
The screwdriver features a 1/4" quick change hexagonal collet for fast and easy bit changes.
- Ensure the screwdriver is turned off and not operating.
- Insert the desired 1/4" hexagonal screwdriver bit firmly into the collet until it clicks into place.
- To remove a bit, pull it straight out from the collet.
5. Arahan Operasi
5.1 Powering On and Direction Control
The screwdriver is operated by pressing the forward or reverse buttons.

Rajah 4: Atas view of the screwdriver highlighting the forward and reverse buttons, and the torque setting indicator.
- Tekan ke butang hadapan (usually indicated by an arrow pointing right or forward) to drive screws.
- Tekan ke reverse button (usually indicated by an arrow pointing left or backward) to remove screws.
- Lepaskan butang untuk menghentikan pemutar skru.
5.2 Tetapan Tork
The screwdriver offers 3 adjustable torque settings (low, medium, high) to suit different applications and prevent overtightening or stripping screws.
- Press the torque adjustment button (often labeled "MAX" or with a torque icon) to cycle through the settings.
- Select a lower torque for delicate materials or small screws, and a higher torque for tougher materials or larger screws.
- Tork maksimum ialah 5 Nm.
5.3 Integrated LED Lights
Two integrated LED lights illuminate the work area, improving visibility in low-light conditions.
- The LED lights typically activate automatically when the screwdriver is in operation.

Rajah 5: The cordless screwdriver being used to install a hinge on a cabinet, demonstrating its compact size and utility in tight spaces.
6. Penyelenggaraan
6.1 Pembersihan
- Always disconnect the tool from any charging source before cleaning.
- Lap bahagian luar alat dengan lembut, damp kain. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
- Pastikan bukaan pengudaraan bersih daripada habuk dan serpihan.
6.2 Penyimpanan
- Store the screwdriver in a dry place, away from direct sunlight and extreme temperatures.
- Ensure the battery is partially charged before long-term storage to maintain battery health.
- Jauhkan daripada kanak-kanak.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pemutar skru tidak boleh dihidupkan. | Bateri habis. | Cas bateri sepenuhnya menggunakan kabel USB-C yang disediakan. |
| Pemutar skru berhenti semasa operasi. | Overload protection activated / Battery low. | Reduce pressure on the tool. Allow it to cool down. Recharge the battery. |
| Slip bit atau jalur kepala skru. | Incorrect bit size / Torque setting too high. | Ensure the correct bit size is used for the screw. Adjust to a lower torque setting. |
| Penunjuk pengecasan tidak berfungsi. | Kabel atau punca kuasa rosak. | Cuba kabel USB-C atau penyesuai kuasa yang lain. Pastikan sambungannya selamat. |
8. Spesifikasi
| Nombor Model | ASD2401-01E |
| Voltage | 3.6 V (maks. 4 V) |
| Jenis Bateri | Integrated Lithium-ion, 2000 mAh |
| Kelajuan Tanpa Beban | Sehingga 300 RPM |
| Max Torque | 5 Nm |
| Tetapan Tork | 3 (Rendah, Sederhana, Tinggi) |
| Saiz Collet | 1/4" Hexagonal |
| Port Pengecasan | USB-C |
| Dimensi (L x W x H) | 3.51 x 3.61 x 17.7 cm (lebih kurang 1.38 x 1.42 x 6.97 inci) |
| Berat badan | 299.37 gram (lebih kurang 0.66 paun) |
| Negara Asal | China |

Rajah 6: The product label on the underside of the screwdriver, displaying model number, voltage, and manufacturing details.
9. Waranti dan Sokongan
This Amazon Basics product is covered by a Waranti alat 5 tahun. For warranty claims or technical support, please contact Amazon customer service. Information regarding spare parts availability is currently not provided.
For returns, the standard return policy allows for refunds or replacements within 30 days, as per Amazon's policy.
Untuk bantuan lanjut, lawati Kedai Asas Amazon.