Multi TCA27QM Multifunction Alarm Clock User Manual

1. Pengenalan

Terima kasih kerana membeliasing the Multi TCA27QM Multifunction Alarm Clock. This device combines a digital alarm clock with an LED night light, a 5W wireless charging pad for Qi-compatible devices, and a USB charging port. It also features a clear LCD display showing time, date, and room temperature. Please read this manual carefully to ensure proper use and maintenance of your device.

2. Maklumat Keselamatan

• Jangan dedahkan peranti kepada air atau kelembapan berlebihan.
• Elakkan meletakkan peranti berhampiran sumber haba atau di bawah cahaya matahari langsung.
• Jangan cuba membuka atau mengubah suai peranti. Ini akan membatalkan jaminan.
• Gunakan hanya penyesuai kuasa yang disediakan atau yang setaraf yang diperakui.
• Jauhkan daripada kanak-kanak.
• Ensure proper ventilation when using the wireless charging function.

3. Kandungan Pakej

Sila semak pakej untuk item berikut:

• Multi TCA27QM Multifunction Alarm Clock
• Power Adapter (may be integrated or separate)
• Manual Pengguna (dokumen ini)

4. Produk Lebihview

Biasakan diri anda dengan komponen jam loceng anda:

Rajah 1: Depan View. This image displays the front of the Multi TCA27QM alarm clock, highlighting its large digital time display, date, temperature, and day of the week. The integrated LED night light is visible at the base, and control buttons are located on the top edge.

Figure 2: Wireless Charging Function. This image shows the alarm clock from an angle, with a smartphone resting on the designated wireless charging area at its base, demonstrating the device's charging capability.

Rajah 3: Belakang View. The back of the alarm clock is shown, featuring the USB charging output port, the power input port, and speaker grilles.

Butang Kawalan (Panel Atas):

• Butang SET: Enters setting mode for time, date, and alarm.
• Butang ATAS/BAWAH: Adjust values during setting mode; also control display brightness.
• Butang PENGGERA: Activates/deactivates alarm and enters alarm setting mode.
• SNOOZE/LIGHT Button: Snoozes alarm; activates/deactivates night light.

Ciri-ciri lain:

• Paparan LCD: Shows time, date, day, and temperature.
• Lampu Malam LED: Located at the base, touch-activated.
• Pad Pengecasan Wayarles: For Qi-compatible devices (5W).
• Port Pengecasan USB: For wired charging of other devices.
• Port Input Kuasa: Menyambung kepada penyesuai kuasa.

5. Persediaan

5.1 Sambungan Kuasa

1. Connect the power adapter to the Power Input Port on the back of the alarm clock.
2. Pasangkan penyesuai ke soket dinding standard. Paparan akan menyala.

5.2 Penetapan Masa dan Tarikh Awal

1. Tekan dan tahan butang SET butang selama 3 saat untuk memasuki mod tetapan masa. Digit jam akan berkelip.
2. Gunakan UP or TURUN butang untuk melaraskan jam.
3. Tekan SET again to confirm the hour and move to minute setting. Adjust with UP/TURUN.
4. Teruskan menekan SET to cycle through and set the year, month, and day using the UP/TURUN butang.
5. Selepas menetapkan hari, tekan SET kali terakhir untuk keluar dari mod tetapan.

Note: The device may use internal batteries for backup in case of power loss, but it primarily operates via the power adapter. No user-replaceable batteries are typically required for basic operation.

6. Arahan Operasi

6.1 Setting and Activating Alarms

1. Tekan dan tahan butang PENGGERA butang selama 3 saat. Angka jam penggera akan berkelip.
2. Gunakan UP or TURUN butang untuk menetapkan jam penggera yang diingini.
3. Tekan PENGGERA again to confirm the hour and set the minutes. Adjust with UP/TURUN.
4. Tekan PENGGERA one more time to exit alarm setting mode.
5. To activate or deactivate the alarm, short press the PENGGERA butang. Ikon penggera akan muncul/hilang pada paparan.

6.2 Fungsi Tunda

Apabila penggera berbunyi, tekan SNOOZE / CAHAYA button to activate the snooze function. The alarm will temporarily stop and sound again after approximately 9 minutes.

6.3 Night Light Operation

Figure 4: Night Light in Use. This image shows the alarm clock on a bedside table in a dimly lit room, with its integrated LED night light providing a soft glow.

• The LED night light is activated by touching the side of the device.
• Touch the side again to cycle through brightness levels or turn off the light.

6.4 Pelarasan Kecerahan Paparan

Tekan pendek UP or TURUN buttons (when not in setting mode) to adjust the brightness of the LCD display.

6.5 Pengecasan Tanpa Wayar

Figure 5: Multiple Charging Options. The alarm clock is shown on a desk, simultaneously charging a smartphone wirelessly on its base and another device via its USB port, demonstrating its versatility.

• Place your Qi-compatible mobile device directly onto the wireless charging pad located at the base of the alarm clock.
• Pastikan peranti dipusatkan pada pad untuk pengecasan optimum.
• A charging indicator (if available on your phone) will confirm charging has begun.

6.6 Pengecasan USB

• Connect your device's USB charging cable to the USB Charging Port on the back of the alarm clock.
• Connect the other end of the cable to your device. Charging will begin automatically.

6.7 Paparan Suhu

The alarm clock automatically displays the ambient room temperature. No manual adjustment is required for this feature.

7. Penyelenggaraan

• To clean the device, wipe it with a soft, dry cloth.
• Jangan gunakan pembersih atau pelarut yang melelas.
• Keep the wireless charging pad free of dust and debris to ensure efficient charging.
• When not in use for extended periods, unplug the power adapter.

8. Penyelesaian masalah

9. Spesifikasi

10. Waranti dan Sokongan

This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or inquiries, please contact the customer service department of your retailer.

Sila simpan bukti pembelian anda untuk tuntutan waranti.