pengenalan
This manual provides detailed instructions for the safe and effective use of your VANPO 1/2" Digital Torque Wrench. This advanced digital torque wrench offers precise torque management with a clear digital display. It is designed for various applications, including automotive, motorcycle, and bicycle maintenance. Please read this manual thoroughly before operation and keep it for future reference.
Kandungan Pakej
Selepas membuka bungkusan, pastikan semua item berikut ada:
- 1 x VANPO 1/2" Digital Torque Wrench
- 2 x Bateri AAA
- 1 x Pemutar skru
- 1 x Manual Arahan (dokumen ini)
Image: The VANPO Digital Torque Wrench, screwdriver, and instruction manual neatly arranged in its protective case.
Persediaan
1. Pemasangan Bateri
- Locate the battery compartment on the handle of the torque wrench.
- Gunakan pemutar skru yang disediakan untuk membuka penutup bateri.
- Masukkan dua bateri AAA, pastikan kekutuban (+/-) betul.
- Gantikan penutup bateri dan kencangkannya dengan skru.
2. Hidupkan/Mati Kuasa
- To power on: Press the 'C' (ON/OFF) button.
- To power off: Press and hold the 'C' (ON/OFF) button. The device will automatically shut off after approximately five minutes of inactivity to conserve battery life.
Imej: Terperinci view of the digital display showing "TRACK" mode and "6.80 N.m", with labeled buttons for Backlight/Key Lock, Plus/Minus Torque, Unit Switch, and ON/OFF.
Arahan Operasi
1. Menukar Unit Pengukuran
Press the 'U' (Unit Switch) button to cycle through available measurement units: N-m (Newton-meters), kgf-cm (kilogram-force centimeters), lbf-ft (pound-force feet), and lbf-in (pound-force inches).
2. Selecting Measurement Mode (TRACK / PEAK)
The torque wrench offers two measurement modes:
- TRACK Mode: Displays the real-time torque value as force is applied.
- Mod PUNCAK: Records and displays the maximum torque value achieved during an operation.
To switch between modes, press the 'M' button (Mode button, usually located near the display).
Image: The display showing "TRACK" mode with a real-time torque value (6.80 N.m) and "PEAK" mode displaying a maximum recorded torque value (30.00 N.m).
3. Setting Target Torque Value
Use the '∧' (Plus) and '∨' (Minus) buttons to adjust the desired target torque value. The display will show the set value.
4. Memohon Tork
- Attach the appropriate socket or bit to the 1/2" square drive.
- Place the tool onto the fastener.
- Apply steady force. The LCD will show the current torque.
- Perubahan Arah: If the product does not perform the tightening operation in the desired direction, hold the square drive interface of the ratchet head with one hand and rotate the ratchet disk with the other hand to change the direction (left or right).
Image: The ratchet head of the torque wrench, illustrating the direction of rotation for clockwise (±2% accuracy) and counter-clockwise (±3% accuracy) operations.
Image: A user applying the VANPO Digital Torque Wrench to tighten a fastener on a bicycle wheel, demonstrating practical use.
5. Torque Alert System
The wrench provides visual and audible alerts as you approach and reach the preset torque value:
- When the applied torque reaches 85%-95% of the preset value, a green LED will illuminate, and the buzzer will sound intermittently.
- When the applied torque reaches 100% of the preset value, a red LED will illuminate, and the buzzer will emit a continuous tone. This indicates the target torque has been reached.
Image: The digital torque wrench display indicating a torque value of 60.00 N.m, with a visual representation of the "BEEP" sound alert when the preset torque is achieved.
6. Backlight and Key Lock
The advanced LCD display features a backlight for use in dark environments.
- To activate/deactivate the backlight: Press the backlight button (often indicated by a sun icon).
- To lock the product: Press and hold the backlight button.
- To unlock the product: Press and hold the backlight button again.
Penyelenggaraan dan Langkah Berjaga-jaga
- Over-Torque Protection: Do not apply force exceeding 110% of the maximum torque value (135 Nm), as this may damage the torque wrench.
- Tangani dengan Berhati-hati: Avoid violently shaking or dropping the torque wrench. Do not store it in locations subject to strong vibrations.
- Penggunaan yang Dimaksudkan: This digital torque wrench is designed for precise torque application. Do not use it as a threading tool or for any purpose other than its intended function.
- Penyimpanan Bateri: If the product will not be used for an extended period, remove the batteries to prevent leakage and damage.
- Matikan automatik: The product will automatically power off after approximately five minutes of non-use to conserve battery life.
- Penentukuran: This product cannot be reset to zero by the user. For professional calibration, please contact customer support.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Wrench does not power on. | Bateri mati atau tidak dipasang dengan betul. | Periksa polariti bateri. Gantikan dengan bateri AAA yang baru. |
| Paparan malap atau berkelip. | Kuasa bateri rendah. | Gantikan bateri. |
| Wrench not tightening in desired direction. | Ratchet direction is set incorrectly. | Hold the square drive and rotate the ratchet disk to change direction. |
| Inaccurate torque readings. | Tool may require calibration or has been damaged. | Ensure proper usage. If issues persist, contact customer support for calibration or service. |
| Wrench is locked and buttons are unresponsive. | Key lock feature is active. | Press and hold the backlight button to unlock the device. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nama Produk | VANPO Digital Torque Wrench |
| Nombor Model | VP016 |
| Saiz Pemacu | 1/2 inci |
| Julat Tork | 6.8 - 135 Nm (10-135 N.m for this variant) |
| Accuracy (Clockwise) | ±2% |
| Accuracy (Counter-clockwise) | ±3% |
| Unit Pengukuran | N-m, kgf-cm, lbf-ft, lbf-in |
| Paparan | LCD dengan Lampu Latar |
| Sumber Kuasa | 2 x Bateri AAA (termasuk) |
| bahan | Keluli Vanadium Chrome |
| Dimensi (L x W x H) | 35 x 12 x 5 cm |
| Berat badan | 1.15 kg |
Waranti dan Sokongan
Specific warranty information is not provided in this manual. For details regarding warranty coverage, technical support, or service, please refer to the product packaging or contact VANPO customer service directly through their official webtapak atau peruncit tempat produk itu dibeli.
Electronic manuals in five languages are available. Please refer to the product's official support channels for access.