GalaxyElec PM02 V3 Power Module Instruction Manual

1. Pengenalan

The GalaxyElec PM02 V3 Power Module is designed to provide a clean power supply to your flight controller and associated accessories, while also offering accurate current consumption and battery voltage measurements. This module is compatible with various flight controllers including APM, Pix32, Pixhawk 4, Pixhawk 4 Mini, and Durandal. It features an integrated switching regulator to deliver stable 5.2V power.

2. Produk Lebihview

2.1 Ciri-ciri Utama

• Vol. Input Makstage: 60V
• Max Current Sensing: 120A
• Voltage dan Pengukuran Semasa: Configured for 5V ADC
• Switching Regulator Output: 5.2V at 3A maximum
• Ketersambungan: 6-position Molex cable for APM/Pix32 'PM' connector; 6-position GH cable for Pixhawk4/Pixhawk4 mini/Durandal 'PM' connector
• Provides clean power from a LiPo battery.
• Measures current consumption and battery voltage.
• Comes pre-assembled with XT60 connectors and protective shrink tubing.

2.2 Kandungan Pakej

• 1x PM02 V3 Power Module with XT60 Connectors
• 1x Molex 6 Position Connector Cable (15 cm)
• 1x GH 6 Position Connector Cable (15 cm)

3. Spesifikasi

4. Panduan Persediaan

4.1 Connecting the Power Module

1. Connect to LiPo Battery: Connect your LiPo battery (up to 12S) to the XT60 input connector on the PM02 V3 module. Ensure correct polarity.
2. Connect to Flight Controller:
   • For APM and Pix32 flight controllers, use the provided 6-position Molex cable to connect the module to the 'PM' connector on your flight controller.
   • For Pixhawk 4, Pixhawk 4 Mini, and Durandal flight controllers, use the provided 6-position GH cable to connect the module to the 'PM' connector on your flight controller.
3. Powering Accessories: The PM02 V3 is designed to power the flight controller, an RC receiver, and accessories such as GPS or radio modules. It provides a regulated 5.2V at up to 3A.

Nota Penting: The PM02 V3 Power Module is bukan designed to power servos. For servo power, use your aircraft's dedicated ESC/BEC (Electronic Speed Controller/Battery Eliminator Circuit).

Image: The PM02 V3 Power Module showing the XT60 connectors for battery input/output and the two signal cables (Molex and GH) for connecting to different flight controllers.

5. Arahan Operasi

Once correctly connected, the PM02 V3 Power Module will automatically provide power to your flight controller and begin transmitting voltage and current data. This data is crucial for battery monitoring and flight controller telemetry.

• Penghantaran Kuasa: The module converts the LiPo battery voltage to a stable 5.2V for your flight controller and compatible accessories.
• Telemetri: The module continuously measures the battery's voltage and the current being drawn by the system. This information is sent to the flight controller via the connected signal cable (Molex or GH) and can be displayed in your ground station software.
• Penentukuran: Untuk jilid tepattage and current readings, it is recommended to perform a power module calibration within your flight controller's ground station software (e.g., Mission Planner, QGroundControl) after initial setup. Refer to your flight controller's specific documentation for calibration procedures.

Imej: Atas view of the PM02 V3 Power Module, showing the main circuit board and XT60 connectors.

6. Penyelenggaraan

The PM02 V3 Power Module is designed for durability, but proper care ensures longevity and reliable performance.

• Periksa Sambungan: Regularly check all cable connections (XT60, Molex, GH) to ensure they are secure and free from corrosion or damage.
• Pemeriksaan Visual: Periodically inspect the module and its wiring for any signs of physical damage, such as frayed wires, cracked shrink tubing, or burnt components.
• Jaga kebersihan: Ensure the module is free from dust, dirt, and moisture. Use a soft, dry brush or compressed air for cleaning if necessary.
• Storan: Store the module in a dry, cool environment away from direct sunlight and extreme temperatures when not in use.

Image: Detailed top view of the PM02 V3 circuit board, showing components and wiring connections.

7. Penyelesaian masalah

If you encounter issues with your PM02 V3 Power Module, consider the following troubleshooting steps:

• No Power to Flight Controller:
  • Verify that the LiPo battery is charged and correctly connected to the XT60 input.
  • Check all connections between the power module and the flight controller (Molex or GH cable) for proper seating and continuity.
  • Inspect the power module and cables for any visible damage.
• Vol yang tidak betultage/Bacaan Semasa:
  • Ensure the power module is correctly calibrated in your flight controller's ground station software. Refer to your flight controller's manual for specific calibration steps.
  • Confirm that the correct power module type is selected in your flight controller's settings, if applicable.
• Modul Terlalu Panas:
  • Ensure the current draw from your flight controller and accessories does not exceed the module's 3A output limit.
  • Verify that no servos are being powered directly by the module, as this can cause overload.

Imej: Bawah view of the PM02 V3 Power Module, clearly showing the 'Holybro PM02 V3.0' branding.

8. Maklumat Keselamatan

Always observe the following safety precautions when handling and operating the PM02 V3 Power Module:

• Polariti yang betul: Always ensure correct polarity when connecting the LiPo battery to the power module. Incorrect polarity can cause severe damage to the module and connected components.
• Voltage Had: Jangan melebihi vol input maksimumtage daripada 60V.
• Had Semasa: Do not exceed the maximum current sensing of 120A or the 3A output limit for the regulated 5.2V supply.
• Litar pintas: Avoid short circuits at all times. Ensure all connections are insulated and secure.
• LiPo Battery Handling: Exercise caution when handling LiPo batteries. They can be dangerous if mishandled.
• Pemasangan Profesional: If you are unsure about any installation steps, seek assistance from an experienced professional.

9. Waranti dan Sokongan

For warranty information, please refer to the terms and conditions provided by your retailer at the time of purchase. For technical support or further inquiries, please contact the manufacturer or your authorized dealer.

Simpan bukti pembelian anda untuk sebarang tuntutan waranti.