Pro-Ject Debut III Phono SB BT Turntable User Manual

pengenalan

Thank you for choosing the Pro-Ject Debut III Phono SB BT Turntable. This manual provides essential information for setting up, operating, and maintaining your new turntable to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.

Arahan Keselamatan

• Sentiasa putuskan sambungan meja putar daripada bekalan kuasa sebelum membersihkan atau melakukan sebarang penyelenggaraan.
• Jangan dedahkan meja putar kepada hujan atau kelembapan.
• Avoid placing the turntable in direct sunlight or near heat sources.
• Pastikan pengudaraan yang betul di sekeliling unit.
• Do not place heavy objects on the turntable.
• Gunakan hanya bekalan kuasa yang disediakan bersama unit ini.
• Jauhkan daripada kanak-kanak.

Apa yang ada dalam Kotak

Carefully unpack all items from the packaging. Please ensure all components listed below are present:

• Pro-Ject Debut III Phono SB BT Turntable Unit
• Penutup Habuk
• Connection Cable (RCA)
• Manual Arahan
• Bekalan Kuasa

Persediaan

Ikuti langkah ini untuk menyediakan meja putar anda:

1. penempatan: Place the turntable on a stable, level surface away from vibrations and direct sunlight.
2. Pemasangan Pinggan: Carefully place the main platter onto the spindle. Ensure it sits securely.
3. Pemasangan Tali Pinggang: Locate the drive belt and carefully stretch it around the motor pulley and the sub-platter.
4. Tonearm Setup:
   

   Imej: Terperinci view of the tonearm, showing the counterweight and anti-skate wire.

   The Ortofon OM5e cartridge is typically pre-mounted. Adjust the counterweight by rotating it until the tonearm floats horizontally. Then, set the tracking force according to the cartridge manufacturer's recommendation (typically 1.75g for OM5e). Attach the anti-skate weight to the anti-skate wire and loop it over the appropriate groove on the anti-skate stub.
5. Connecting to Audio System:
   

   Imej: Side profile of the turntable, highlighting its sturdy plinth and isolation feet.

   Connect the RCA output cables from the turntable to an available input on your amplifier or powered speakers. Since this model has a built-in phono preamp, you can connect it to a standard line-level input (e.g., AUX, CD, LINE). If your amplifier has a dedicated phono input, you may choose to bypass the internal preamp if desired (refer to the turntable's specific instructions for preamp bypass).
6. Sambungan Bluetooth: To connect wirelessly, ensure your Bluetooth speaker or receiver is in pairing mode. Press and hold the Bluetooth pairing button on the turntable (if available, refer to specific model instructions for location) until the indicator light flashes. Select 'Pro-Ject Turntable' or similar from your device's Bluetooth list.
7. Sambungan Kuasa: Connect the power supply to the turntable's power input and then plug it into a wall outlet.

Beroperasi

Operating your turntable is straightforward:

1. Hidupkan/Mati Kuasa:
   

   Image: The power switch, typically located on the underside or side of the plinth.

   Use the power switch to turn the turntable on or off.
2. Pemilihan Kelajuan: The turntable supports 33, 45, and 78 RPM speeds. Use the electronic speed switch to select the appropriate speed for your record. For 78 RPM records, a special stylus (not included) is required.
3. Memainkan Rekod:
   

   Imej: Overhed view of the turntable, showing the platter, record mat, and tonearm.

   Place a record on the platter. Carefully lift the tonearm using the cueing lever. Position the stylus over the desired groove on the record. Gently lower the cueing lever to allow the stylus to descend onto the record.
4. Menghentikan Main Semula: At the end of a record, the tonearm will not automatically lift. Use the cueing lever to raise the tonearm and return it to its rest.

Penyelenggaraan

Regular maintenance ensures the longevity and performance of your turntable:

• Membersihkan Meja Putar: Use a soft, dry, lint-free cloth to clean the plinth and dust cover. Avoid abrasive cleaners or solvents.
• Penjagaan Stylus:
  

  Imej: Terperinci view of the Ortofon OM5e cartridge and stylus, positioned over a record.

  Gently clean the stylus using a soft brush designed for stylus cleaning, brushing from back to front. Do not touch the stylus with your fingers. Replace the stylus periodically (e.g., every 500-1000 hours of playback) or if you notice a degradation in sound quality.
• Pembersihan Rekod: Pastikan rekod anda bersih untuk mengelakkan pengumpulan habuk pada stylus dan meningkatkan kualiti bunyi.

Menyelesaikan masalah

Jika anda menghadapi masalah dengan meja putar anda, rujuk masalah dan penyelesaian biasa berikut:

If the problem persists, please contact Pro-Ject customer support.

Spesifikasi

Key specifications for the Pro-Ject Debut III Phono SB BT Turntable:

• Dimensi Produk: 16.34 x 12.6 x 4.53 inci
• Berat Barang: 13.2 paun (6 Kilogram)
• Tonearm: 8.6 inch one-piece low-resonance aluminium tonearm
• Kartrij: Ortofon OM5e (pre-installed)
• Ketersambungan: Auxiliary (RCA), Bluetooth
• Kelajuan Putaran Maksimum: 78 RPM (supports 33, 45, 78 RPM)
• Ciri Khas: Adjustable Speed, Built-in Phono Preamp
• Bahan Casis: High-quality MDF chassis in high-gloss black
• Penggunaan Kuasa (Mod dalam): 4 watt

Waranti dan Sokongan

This Pro-Ject turntable comes with a manufacturer's warranty. Please refer to the warranty card included in your packaging for specific terms and conditions. For technical support, service, or warranty claims, please contact Pro-Ject Audio Systems customer service through their official webtapak atau maklumat hubungan yang diberikan bersama dokumentasi pembelian anda.