AOPUTTRIVER AP-570S-APP Bluetooth Clamp Manual Pengguna Meter

1. Pengenalan

The AOPUTTRIVER AP-570S-APP is a portable, high-performance digital clamp meter designed for accurate measurement of various electrical parameters. This device features Bluetooth connectivity, allowing it to pair with mobile phones for data logging and analysis. It is suitable for troubleshooting electrical problems in home improvement, appliance repair, line maintenance, and car repair applications.

Image 1.1: The AP-570S-APP Clamp Meter being used in different electrical measurement scenarios, including home wiring, appliance repair, and automotive diagnostics.

2. Maklumat Keselamatan

Sila baca semua amaran keselamatan dan arahan pengendalian dengan teliti sebelum menggunakan instrumen ini. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau kecederaan serius.

• Sentiasa pastikan clamp meter is in good working condition before use. Inspect for any damage to the casing, test leads, or insulation.
• Jangan gunakan meter jika ia kelihatan rosak atau jika penebatnya terjejas.
• Patuhi semua kod keselamatan tempatan dan kebangsaan.
• Elakkan bekerja sendirian.
• Berhati-hati apabila bekerja dengan voltagadalah melebihi 30V AC RMS, puncak 42V atau 60V DC. Ini voltagia menimbulkan bahaya kejutan.
• Always disconnect power to the circuit under test before making connections or disconnections, especially when measuring resistance, capacitance, or performing diode tests.
• The AP-570S-APP features a double insulation design for enhanced protection. However, always exercise caution.
• The Non-Contact Voltage (NCV) detection feature allows for voltage detection without direct contact, improving safety.
• Replace the battery promptly when the low battery indicator appears to ensure accurate readings and proper operation.

Imej 2.1: Klamp meter with a rubber sleeve for protection against drops and emphasizing safety features like double insulation.

3. Ciri-ciri Produk

• Multifunction Measurement: Accurately measures AC/DC Voltage (600mV-1000V), AC/DC Current (600A-1000A), Resistance (600Ω-60MΩ), Capacitance (6nF-60mF), Frequency (9.999Hz-9.999MHz), Duty Cycle, Diode, and Continuity.
• Bluetooth APP Connectivity: Connects to mobile phones (Android/iOS) via Bluetooth for real-time data display, logging, and analysis using the "AiLink" app.
• Pengukuran Suhu: Includes a thermocouple for temperature testing, with switchable units (℃/℉).
• Vol. Bukan Kenalantage (NCV) Pengesanan: Mengesan vol AC dengan selamattage without direct contact, indicated by sound and light.
• Paparan Lampu Belakang: Large LCD with backlight for clear readings in dark environments.
• Pegangan Data: Membekukan bacaan semasa pada paparan.
• Fungsi MAKSIMUM/MINIT: Records maximum and minimum measured values.
• REL (Relative) Mode: Measures the change in a signal relative to a stored reference value.
• Pengisaran Auto/Manual: Offers flexibility in measurement ranges.
• Reka Bentuk Penebat Berganda: Provides enhanced user safety.
• Matikan Automatik: Menjimatkan hayat bateri.

4. Layout Introduction (Components)

Familiarize yourself with the different parts of your AOPUTTRIVER AP-570S-APP Clamp meter:

Image 4.1: Detailed diagram showing the layout and functions of the clamp meter's various parts.

1. Clamp Rahang: Opens up to 45mm to enclose a conductor for current measurement.
2. NCV Detection Area: Area for non-contact voltagpengesanan e.
3. Jaw-Opening Handle: Used to open and close the clamp rahang.
4. Suis Putar: Selects measurement functions and ranges.
5. Kunci TAHAN: Press to hold the current reading. Press and hold for more than 2 seconds to activate/deactivate backlight.
6. Kunci PILIH: Used to switch between functions within a rotary switch position (e.g., AC/DC voltage, diode/continuity, capacitance).
7. Kunci MAX/MIN: Press to display the maximum or minimum measured value. Press and hold for 2 seconds to exit.
8. Kunci REL: Mengaktifkan mod pengukuran relatif.
9. Kekunci Hz/Tugas: In ACV/ACA or Hz range, press to choose between Frequency (Hz) or Duty Cycle measurement.
10. Paparan LCD: 6000 counts digital display with full function symbols.
11. Bicu Input COM: Input biasa (negatif) untuk petunjuk ujian.
12. VΩHzT+ Input Jack: Input positif untuk voltage, resistance, frequency, temperature, and capacitance measurements.

5. Persediaan

5.1 Pemasangan Bateri

The AP-570S-APP requires a 9V battery for operation. To install or replace the battery:

1. Pastikan clamp meter is turned OFF (Rotary Switch set to OFF).
2. Cari penutup petak bateri di belakang meter.
3. Gunakan pemutar skru untuk membuka petak bateri.
4. Sambungkan bateri 9V ke klip bateri, memerhatikan kekutuban yang betul.
5. Place the battery into the compartment and secure the cover.

5.2 Kuasa Awal Hidup

After battery installation, turn the Rotary Switch from OFF to any desired measurement function to power on the device. The LCD display will illuminate.

Imej 5.1: Klamp meter shown with its packaging, carrying bag, test leads, thermocouple, and 9V battery.

6. Arahan Operasi

To perform measurements, rotate the Rotary Switch to the desired function. Connect test leads or use the clamp jaws as appropriate for the measurement type.

6.1 Pengukuran Arus AC/DC

1. Set the Rotary Switch to the 600A~1000A kedudukan.
2. Tekan ke PILIH key to switch between AC (~) and DC (—) current measurement if necessary.
3. Buka clamp rahang menggunakan pemegang pembuka rahang.
4. Sertakan hanya satu konduktor dengan clamp jaws. Ensure the conductor is centered within the jaws for accurate readings.
5. Baca nilai semasa pada paparan LCD.

Note: For currents between 0-600A, resolution is 0.1A. For 600-1000A, resolution is 1.0A.

6.2 AC/DC Jldtage Pengukuran

1. Set the Rotary Switch to the V— or V~ kedudukan.
2. Tekan ke PILIH key to switch between AC (~) and DC (—) voltagpengukuran jika perlu.
3. Masukkan petunjuk ujian hitam ke dalam COM bicu dan petunjuk ujian merah ke dalam VΩHzT+ jek.
4. Sambungkan kuar ujian merentasi litar atau komponen yang hendak diukur.
5. Baca voltagnilai e pada paparan LCD.

6.3 Resistance, Diode, Continuity, and Capacitance Measurement

1. Set the Rotary Switch to the Ω kedudukan.
2. Tekan ke PILIH key to cycle through Resistance (Ω), Diode Test (→|), Continuity Test (♫), and Capacitance (—||—) functions.
3. Masukkan petunjuk ujian hitam ke dalam COM bicu dan petunjuk ujian merah ke dalam VΩHzT+ jek.
4. Connect the test probes to the component.
5. Read the value on the LCD display. For continuity, an audible beep indicates a continuous circuit.

6.4 Pengukuran Frekuensi dan Kitaran Tugas

1. Set the Rotary Switch to the Hz kedudukan.
2. Masukkan petunjuk ujian hitam ke dalam COM bicu dan petunjuk ujian merah ke dalam VΩHzT+ jek.
3. Connect the test probes to the signal source.
4. Tekan ke Hz/Tugas key to switch between Frequency (Hz) and Duty Cycle (%).
5. Baca nilai pada paparan LCD.

6.5 Pengukuran Suhu

1. Set the Rotary Switch to the ° C / ° F kedudukan.
2. Insert the thermocouple into the COM dan VΩHzT+ bicu, memerhati kekutuban.
3. Letakkan prob termogandingan pada titik di mana suhu hendak diukur.
4. Tekan ke PILIH key to switch between Celsius (°C) and Fahrenheit (°F).
5. Baca nilai suhu pada paparan LCD.

Imej 6.1: Klamp meter displaying temperature readings in both Celsius and Fahrenheit, with a thermocouple probe immersed in water.

6.6 Bukan Kenalan Voltage (NCV) Pengesanan

1. Set the Rotary Switch to the NCV kedudukan.
2. Move the NCV detection area of the meter close to the wire or conductor where voltage disyaki.
3. Sekiranya AC voltage is detected, the meter will emit an audible beep and the NCV indicator light will illuminate.

Imej 6.2: Klamp meter detecting non-contact voltage near an electrical outlet, indicated by a red glow and 'bi bi' sound representation.

6.7 Fungsi Lampu Latar

To activate or deactivate the backlight, press and hold the TAHAN button for more than 2 seconds. The backlight improves visibility in dimly lit conditions.

Image 6.3: Comparison of the clamp meter's LCD display, showing improved readability with the backlight activated.

7. Bluetooth APP Connection

The AP-570S-APP can connect to your mobile device via Bluetooth for enhanced functionality, including data logging and analysis.

1. Muat turun Apl: Scan the QR code below or search for "AiLink" in the Google Play Store (for Android) or Apple App Store (for iOS). Download and install the application.
2. Daftar/Log Masuk: Open the AiLink app. You may need to register a new account or log in using an existing account (e.g., Facebook or Apple ID).
3. Sambungkan Clamp meter: Ensure Bluetooth is enabled on your mobile phone. In the AiLink app, press the "ADD" or "+" button to search for nearby devices. Select the clamp meter from the list to connect.
4. Start Measurement and Analysis: Setelah disambungkan, anda boleh view real-time data, save measurements, and analyze them within the app. The app allows for data export (e.g., CSV files).

Image 7.1: Visual guide demonstrating the steps to download the AiLink app, log in, connect to the clamp meter, and view data.

Download AiLink App: https://aicare.net.cn/app/ailink/download/

8. Penyelenggaraan

• Pembersihan: Regularly wipe the meter casing dengan iklanamp kain dan bahan pencuci ringan. Jangan gunakan pelelas atau pelarut.
• Penggantian Bateri: Replace the 9V battery when the low battery indicator appears on the display. Always turn off the meter before replacing the battery.
• Storan: If the meter is not used for an extended period, remove the battery to prevent leakage. Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures.
• Penentukuran: For professional use, periodic calibration by a qualified technician is recommended to ensure continued accuracy.

9. Penyelesaian masalah

10. Spesifikasi

11. Waranti dan Sokongan

AOPUTTRIVER products are designed for reliability and performance. For warranty information or technical support, please refer to the documentation included with your purchase or contact AOPUTTRIVER customer service directly. If you have questions about the product during daily use, please contact us for assistance.