LEDVANCE 65636

Sylvania 32ft RGB Flexible Light Strip Starter Kit Instruction Manual

Model: 65636 | Jenama: LEDVANCE

Maklumat Keselamatan Penting

  • Penggunaan Dalaman Sahaja: Produk ini direka bentuk untuk kegunaan dalaman di lokasi kering. Jangan dedahkan kepada air atau kelembapan yang tinggi.
  • Keselamatan Elektrik: Ensure the power adapter is connected to a suitable power outlet. Do not overload electrical circuits.
  • Arahan pemotongan: The LED strips can be cut for customized length. Only cut along the designated markings to avoid damaging the strip.
  • Pemasangan: Sentiasa putuskan sambungan kuasa sebelum pemasangan atau penyelenggaraan.
  • haba: Do not cover the LED strips with materials that may trap heat, as this can cause overheating.
  • Kanak-kanak: Jauhkan produk dan komponennya daripada kanak-kanak.

Kandungan Pakej

Sahkan bahawa semua komponen terdapat dalam pakej anda:

  • (2) 16.4ft RGB Flexible LED Light Strips
  • (1) Bekalan Kuasa
  • (1) IR Remote Controller (with battery included)
  • (20) Klip Pemasangan
Sylvania 32ft RGB Flexible Light Strip Starter Kit components

Image: Main product image showing the light strips, remote, power adapter, and clips.

Persediaan dan Pemasangan

  1. Sediakan Permukaan: Ensure the installation surface is clean, dry, and smooth for optimal adhesion of the clips.
  2. Sambungkan Komponen: Connect the LED light strips to the controller, ensuring the arrows on the connectors align. Then, connect the power supply to the controller.
  3. Kefungsian Ujian: Before permanent mounting, plug in the power supply and use the remote control to test the light strips. Verify all colors and modes function correctly.
  4. Customize Length (Optional): If a shorter length is desired, only cut the LED strips along the designated cutting marks (usually indicated by a scissor icon or copper pads). Cutting elsewhere will damage the strip.
  5. Mount the Strips: Remove the adhesive outer layer from the back of the mounting clips and press firmly for five seconds when mounting. Use the provided clips to secure the light strips in your desired location, such as under cabinets, behind TVs, or along shelves.
  6. Aktifkan Alat Jauh: Remove the plastic tab from the remote control's battery door to activate the battery.
Diagram showing connection, cutting points, and mounting of LED strips

Image: Step-by-step diagram illustrating how to connect the light strips, identify cutting points, and mount them using clips.

Operasi

The Sylvania RGB Flexible Light Strips are controlled using the included IR remote. Ensure the remote is pointed towards the IR receiver on the controller for optimal response.

Fungsi Kawalan Jauh:

  • HIDUP/MATI: Power the light strips on or off.
  • Pilihan Warna: Pilih daripada 16 warna statik menggunakan butang warna.
  • Peredupan: Adjust the brightness of the selected color or dynamic mode.
  • Mod Dinamik: Select from 4 pre-programmed dynamic modes (e.g., Flash, Strobe, Fade, Smooth) to create different lighting effects.
Diagram of the IR remote control with labeled buttons for colors and modes

Image: Detailed illustration of the IR remote control, highlighting buttons for power, color selection, dimming, and dynamic modes.

Penyelenggaraan

  • Pembersihan: Gently wipe the LED strips with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
  • Jangka hayat: The LED technology provides a long operational life of up to 30,000 hours under normal use conditions.
  • Penggantian Bateri Jauh: If the remote control becomes unresponsive, replace the CR2025 lithium coin cell battery.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Lampu tidak menyala.Power connection issue, remote battery dead, IR receiver blocked.Check all connections (power supply, controller, strips). Ensure arrows on connectors align. Replace remote battery. Ensure remote is pointed at the IR receiver without obstruction.
Alat kawalan jauh tidak bertindak balas.Remote battery dead, remote too far, IR receiver blocked.Replace remote battery. Ensure remote is within range and pointed directly at the IR receiver. Remove any obstructions between the remote and receiver.
Some sections of the light strip are not lighting up.Damaged section, incorrect cutting.Inspect the strip for physical damage. If a section was cut incorrectly, it may be permanently damaged. Ensure connections are secure.

Spesifikasi

CiriPerincian
Nombor Model65636
JenamaLEDVANCE (Sylvania)
warnaRGB (16 colors) + White
Panjang32ft (2 x 16.4ft strips)
PenggunaanDalaman Sahaja
Ciri KhasColor Changing, Dimmable, Energy Efficient
Jenis Sumber CahayaLED
Sumber KuasaElektrik Bertali
Jenis PengawalKawalan Jauh IR
Voltage12 Volt
Wattage24 watt
KetersambunganInframerah
bahanplastik
Berat Barang10.88 auns
Jangka hayatSehingga 30,000 jam
Tahan AirBukan Tahan Air
UPC046135656361

Waranti dan Sokongan

This Sylvania LED Flexible Light Strip Starter Kit is backed by a Waranti pengilang selama 1 tahun.

Untuk sokongan teknikal, tuntutan waranti atau maklumat produk tambahan, sila lawati LEDVANCE rasmi webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.

Anda juga boleh melawat Kedai LEDVANCE di Amazon untuk lebih banyak produk dan maklumat.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.