Omega Cold Press 365 Vertical Juicer (Model JC3000SV13) Instruction Manual

1. Maklumat Keselamatan Penting

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury. Read all instructions carefully before using the juicer.

• Ensure the juicer is properly assembled before plugging it in or operating.
• Jangan rendam tapak motor dalam air atau cecair lain.
• Jauhkan tangan dan perkakas daripada pelongsor suapan semasa operasi untuk mengelakkan kecederaan. Gunakan penolak makanan yang disediakan.
• Cabut plag pemerah jus daripada soket apabila tidak digunakan, sebelum memasang atau membuka bahagian-bahagiannya dan sebelum membersihkannya.
• Jangan kendalikan sebarang perkakas dengan kord atau palam yang rosak, atau selepas perkakas tidak berfungsi atau rosak dalam apa jua cara.
• Perkakas ini adalah untuk kegunaan rumah sahaja.

2. Komponen Produk

Your Omega Cold Press 365 Vertical Juicer includes the following parts:

• Juicer Body (Motor Base)
• Hopper/Feed Chute
• Mangkuk Jus
• Auger (3-stage)
• Skrin Jus
• Pulp Outlet
• Juice Outlet with No-Drip Tap
• Makanan Penolak
• 1 Bekas Jus
• 1 Bekas Pulpa
• Berus Pembersih

Image: All components of the Omega Cold Press 365 Vertical Juicer, including the motor base, juicing assembly, containers, and cleaning brush.

3. Persediaan dan Pemasangan

Before first use, wash all removable parts in warm, soapy water. Rinse thoroughly and dry. Ensure the juicer is placed on a stable, flat surface.

1. Place the juicing bowl onto the motor base, aligning the red dot on the bowl with the red dot on the base. Twist clockwise until it clicks into place.
2. Insert the juice screen into the juicing bowl, followed by the auger.
3. Attach the hopper/feed chute to the top of the juicing bowl, ensuring it is securely locked. The juicer will not operate if the parts are not correctly aligned and locked.
4. Letakkan bekas jus di bawah saluran keluar jus dan bekas pulpa di bawah saluran keluar pulpa.

4. Arahan Operasi

The Omega Cold Press 365 features a digital touchpad with two speed settings and a reverse function for optimal juicing.

• Penyediaan: Wash all fruits and vegetables thoroughly. Cut ingredients into pieces small enough to fit comfortably into the feed chute. Remove any hard pits or large seeds.
• Hidupkan kuasa: Plug the juicer into a grounded electrical outlet. Press the power button on the digital touchpad.
• Pemilihan Kelajuan: Press the speed button to toggle between 'HI' (High) for harder produce like carrots and apples, and 'LO' (Low) for softer fruits and leafy greens.
• Jus: Slowly feed ingredients into the feed chute. Use the food pusher to gently guide them down. Do not force ingredients.
• No-Drip Tap: The juice outlet features a no-drip tap. Close it to mix juices within the juicing bowl before dispensing, or to prevent drips when changing containers. Open it to release the juice into the container.
• Fungsi terbalik: If ingredients become jammed, press the 'REV' (Reverse) button to clear the blockage. Hold for a few seconds, then release and resume normal operation.

Image: The digital touchpad of the Omega Juicer, highlighting the intuitive controls for power, speed selection (High/Low), and the reverse function.

Image: The no-drip dispenser in action, showing juice flowing smoothly into a collection pitcher.

5. Penjagaan dan Penyelenggaraan

Pembersihan tetap memastikan prestasi optimum dan jangka hayat pemerah jus anda.

1. Pembongkaran: Unplug the juicer. Disassemble the parts in reverse order of assembly: remove the food pusher, hopper, juicing bowl assembly (auger, screen), and then the juicing bowl from the motor base.
2. Pembersihan: Rinse all removable parts immediately after use to prevent pulp from drying. Use the provided cleaning brush to remove any stubborn pulp from the juice screen and other components. Some included accessories are top-rack dishwasher safe; however, hand washing is recommended for all parts to prolong their lifespan. The motor base should only be wiped clean with a damp kain.
3. Pengeringan dan Penyimpanan: Allow all parts to air dry completely before reassembling or storing. Store the juicer in a clean, dry place.

6. Penyelesaian masalah

Jika anda menghadapi masalah dengan pemerah jus anda, rujuk kepada penyelesaian biasa berikut:

• Juicer tidak dihidupkan: Ensure all parts are correctly assembled and locked into place. The safety interlock mechanism prevents operation if components are not properly aligned. Check that the power cord is securely plugged into a working outlet.
• Ingredients are not juicing or are jamming: Use the 'REV' (Reverse) function to clear any blockages. Cut ingredients into smaller pieces, especially fibrous vegetables like celery. Alternate between hard and soft ingredients.
• Pulpa yang berlebihan dalam jus: Ensure the juice screen is clean and free of debris. The 3-stage auger is designed for efficient extraction, but very soft or overripe fruits may produce slightly more pulp.
• Juicer is leaking: Check that all seals and gaskets are properly seated and not damaged. Ensure the juicing bowl is correctly locked onto the motor base.

For persistent issues, please contact Omega customer support.

7. Spesifikasi Teknikal

Image: Visual representation of the juicer's compact dimensions for easy countertop placement.

8. Waranti dan Sokongan

Your Omega Cold Press 365 Vertical Juicer is covered by a Waranti Terhad Pengilang 1 Tahun. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah kegunaan rumah biasa.

For warranty claims, technical assistance, or any questions regarding your product, please contact Omega customer support directly. Refer to the contact information provided in your product packaging or visit the official Omega webtapak.