pengenalan
This manual provides detailed instructions for the safe installation, operation, and maintenance of your RICOO S7744 TV Wall Mount. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image: The RICOO S7744 TV Wall Mount, showcasing its articulating arm design.
Maklumat Keselamatan
- Ensure the mounting surface can safely support the combined weight of the mount and your TV.
- Use appropriate tools and follow all steps precisely. If unsure, consult a qualified installer.
- Jangan melebihi kapasiti berat maksimum 45 kg (99 lbs).
- Verify VESA compatibility (max 400x400 mm) with your TV before installation.
- Jauhkan kanak-kanak dan haiwan peliharaan semasa pemasangan.
Kandungan Pakej
Please check that all components are present and undamaged before installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.
Pakej biasanya termasuk:
- Wall plate assembly with articulating arm
- TV bracket arms
- Mounting hardware kit (various screws, washers, spacers, and concrete anchors)
- Manual arahan
Persediaan dan Pemasangan
Follow these steps carefully to install your TV wall mount. It is recommended to have two people for installation.
- Langkah 1: Tentukan Lokasi Pemasangan
Choose a suitable location on your wall. Ensure there are no hidden electrical wires or plumbing. The wall must be capable of supporting the weight of the mount and your TV. Use a stud finder if mounting to wood studs.
- Langkah 2: Pasangkan Kurungan TV pada TV
Carefully place your TV face down on a soft, clean surface. Attach the TV bracket arms to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened to the VESA mounting holes on your TV.
Note: The mount supports VESA patterns from 200x200 mm up to 400x400 mm.
- Langkah 3: Lekapkan Plat Dinding ke Dinding
Hold the wall plate assembly against the wall at your desired height. Use a level to ensure it is straight. Mark the drilling locations. Drill pilot holes. For concrete walls, insert the provided wall anchors. Secure the wall plate to the wall using the appropriate screws. Ensure it is level and firmly attached.
- Langkah 4: Gantungkan TV pada Plat Dinding
With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated on the wall plate. Tighten any safety screws or locking mechanisms to prevent accidental dislodgement.
Operating the TV Wall Mount
The RICOO S7744 mount offers various adjustments for optimal viewing.
- Pusing: The mount allows for a swivel range of +/-60 degrees. Gently push or pull the TV to adjust the viewsudut mendatar.
- Condong: Laraskan menegak viewing angle with a tilt range of +18 degrees (up) to -2 degrees (down). Loosen the tilt adjustment screws, set the desired angle, and re-tighten.
- meratakan: The front plate can be rotated +/-3 degrees for fine-tuning the TV's level after installation. Loosen the leveling screws, adjust, and re-tighten.
- Sambungan: The arm length can be extended from 86 mm to 388 mm from the wall. Gently pull the TV away from the wall or push it closer.
Image: Demonstrates the swivel, tilt, and extension capabilities of the mount, along with integrated cable management features for organizing cables.
Penyelenggaraan
Penyelenggaraan berkala memastikan ketahanan dan operasi pemasangan TV di dinding anda yang selamat.
- Pembersihan: Lap pelekap dengan kain lembut dan kering. Elakkan pembersih atau pelarut yang kasar.
- Pemeriksaan Berkala: Periksa semua skru dan bolt secara berkala untuk memastikan ia kekal ketat. Ketatkan semula jika perlu.
- Pergerakan: If the mount's movement becomes stiff, apply a small amount of silicone-based lubricant to the moving joints.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| TV tidak tahap | Wall plate not level, or front plate adjustment needed. | Adjust the +/-3 degree leveling feature on the front plate. If the wall plate is significantly off, re-install it ensuring it is level. |
| Mount feels loose or wobbly | Mounting screws are not tight enough, or wall anchors are insufficient. | Check and re-tighten all wall and TV mounting screws. Ensure appropriate anchors were used for your wall type and that they are securely installed. |
| Difficulty adjusting swivel/tilt | Adjustment screws are too tight, or joints require lubrication. | Loosen adjustment screws slightly. Apply silicone-based lubricant to moving joints if necessary. |
Spesifikasi
- model: S7744
- Keserasian Saiz Skrin: 32 - 55 inches (81 cm - 140 cm)
- Kapasiti Berat Maksimum: 45 kg (99 lbs)
- Keserasian VESA: 200x200, 300x200, 300x300, 400x200, 400x400 mm
- Julat Pusing: +/- 60 darjah
- Julat Miring: +18 degrees / -2 degrees
- Pelarasan Aras: +/- 3 darjah
- Wall Distance (Arm Length): 86 mm - 388 mm
- Bahan: Steel (Note: Product specifications listed 'wood', but steel is the standard material for TV mounts of this type.)
- warna: Hitam
- Dimensi Produk: 15.28 x 17.13 x 16.54 inci
- Berat Barang: 9.48 paun
Image: Detailed technical drawing showing the dimensions and adjustable ranges of the RICOO S7744 TV Wall Mount in millimeters.
Waranti dan Sokongan
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official RICOO webtapak. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.
Pengeluar: ENZ Engineering GmbH