Zoop Digital Watch NP16015PP01 User Manual

pengenalan

This manual provides comprehensive instructions for the operation and maintenance of your Zoop Digital Watch, model NP16015PP01. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your watch.

Bahagian dan Kawalan

Familiarize yourself with the watch's display and buttons:

This image displays the front of the Zoop Digital Watch, highlighting the digital display and the labels for the four control buttons: TETAP SEMULA (kiri atas), MODE (kiri bawah), ST / STP (top right, for Start/Stop), and CAHAYA (bottom right).

Imej ini menunjukkan satu sisi view of the watch, illustrating the physical location of the control buttons on the watch case.

• Butang MOD: Used to cycle through different watch modes (Time, Stopwatch, Alarm). Also used to enter and exit setting modes.
• Butang TETAP SEMULA: Used to reset values (e.g., stopwatch), confirm settings, or adjust specific parameters during setting.
• ST/STP Button: Used to start and stop functions (e.g., stopwatch). Also used to increase values during setting.
• Butang CAHAYA: Activates the backlight for the display.

Initial Setup: Setting Time and Date

Follow these steps to set the current time and date on your watch:

1. daripada Mod Paparan Masa, tekan butang MODE button three times until the seconds begin to flash. This indicates you are in the time setting mode.
2. Tekan ke TETAP SEMULA button to cycle through the settings: seconds > hour > minute > month > date > day of the week. The currently adjustable value will flash.
3. Gunakan ST / STP button to adjust the flashing value. Hold the button to change values quickly.
4. Untuk bertukar antara format 12 jam dan 24 jam, tekan butang ST / STP butang apabila jam berkelip.
5. Setelah semua tetapan betul, tekan butang MODE button to exit the setting mode and return to the Mod Paparan Masa.

Mod Pengendalian

Mod Paparan Masa

This is the default mode, showing the current time, day, and date. Press the CAHAYA butang untuk menerangi paparan.

Mod Jam Randik

1. daripada Mod Paparan Masa, tekan butang MODE butang sekali untuk masuk Mod Jam Randik. The display will show '00:00:00'.
2. Tekan ST / STP untuk memulakan jam randik.
3. Tekan ST / STP sekali lagi untuk menjeda jam randik.
4. Semasa dijeda, tekan TETAP SEMULA untuk menetapkan semula jam randik kepada '00:00:00'.
5. Tekan MODE untuk kembali ke Mod Paparan Masa.

Mod Penggera

1. daripada Mod Paparan Masa, tekan butang MODE butang dua kali untuk masuk Mod Penggera. The alarm time will be displayed.
2. Tekan ke TETAP SEMULA butang untuk menghidupkan/mematikan penggera. Ikon penggera akan muncul/hilang pada paparan.
3. Untuk menetapkan masa penggera, tekan butang ST / STP button. The hour digits will flash. Use TETAP SEMULA untuk menyesuaikan jam.
4. Tekan ST / STP again to select the minute digits. Use TETAP SEMULA untuk menyesuaikan minit.
5. Tekan MODE untuk keluar Mod Penggera dan simpan tetapan.

Fungsi Cahaya

Tekan ke CAHAYA button at any time to illuminate the display for a few seconds, improving visibility in low-light conditions.

Penjagaan dan Penyelenggaraan

• Pembersihan: Lap jam tangan dengan kerap menggunakan kain lembut dan kering. Untuk kotoran degil, lap sedikitamp kain boleh digunakan, diikuti dengan pengeringan. Elakkan bahan kimia yang keras atau pembersih yang kasar.
• Tahan Air: This watch is water-resistant up to 50 meters (5 ATM). This means it is suitable for showering, swimming in shallow water, and general water exposure. It is not suitable for diving or high-pressure water activities. Do not operate buttons underwater.
• Suhu: Elakkan mendedahkan jam tangan kepada suhu ekstrem (panas atau sejuk) atau perubahan suhu secara tiba-tiba, kerana ini boleh menjejaskan ketepatan dan jangka hayatnya.
• Bateri: The watch is powered by a Lithium Polymer battery (included). When the display becomes dim or functions become erratic, the battery may need replacement. Battery replacement should ideally be performed by a qualified watch technician to ensure water resistance is maintained.
• Kesan: Protect the watch from strong impacts or drops, which can damage the internal components or casing.

Menyelesaikan masalah

• Paparan kosong atau malap: The battery may be low or depleted. Consider replacing the battery.
• Masa tidak tepat: Re-set the time and date following the instructions in the "Initial Setup" section. Ensure the 12/24-hour format is correctly selected.
• Butang tidak bertindak balas: Ensure the watch is not exposed to extreme conditions. If the issue persists, a battery replacement or a full reset (if applicable, by removing and reinserting the battery) might be necessary. Consult a professional if problems continue.
• Air di dalam jam tangan: If condensation or water appears inside the watch, stop using it immediately and take it to a professional watch repair service.

Spesifikasi

This image provides a visual reference for the watch's dimensions, showing the watch alongside a ruler.

Waranti dan Sokongan

For specific warranty terms and conditions, please refer to the warranty card or documentation included with your purchase. Keep your proof of purchase for any warranty claims.

If you require further assistance or have questions not covered in this manual, please contact the retailer or the manufacturer's customer support. Contact details are typically provided in the product packaging or on the official brand webtapak.