BONTEC Mobile Standing Desk Instruction Manual

pengenalan

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your BONTEC Mobile Standing Desk. Designed for versatility and ergonomic comfort, this desk allows seamless transition between sitting and standing positions, promoting a healthier workstyle. Its mobile design makes it suitable for various environments, including offices, homes, and educational or medical settings.

Maklumat Keselamatan Penting

Sila baca dan fahami semua amaran dan arahan keselamatan sebelum pemasangan dan penggunaan. Kegagalan untuk mengikuti arahan ini boleh mengakibatkan kecederaan atau kerosakan pada produk.

• Had Berat: Jangan melebihi kapasiti beban maksimum 33 paun (15 kg) for the desktop and 11 paun (5 kg) for the keyboard tray. Overloading can cause instability and damage.
• Perhimpunan: Ensure all components are securely fastened according to the assembly instructions. Do not use the desk if any parts are missing or damaged.
• Kestabilan: The "H"-shaped frame base provides stability. Always ensure the desk is on a flat, stable surface. Lock the casters when the desk is in a stationary position to prevent accidental movement.
• Pergerakan: When moving the desk, ensure all items are removed from the desktop and keyboard tray to prevent them from falling. Unlock the casters before moving.
• Kanak-kanak dan Haiwan Kesayangan: Keep children and pets away from the desk during assembly and operation. Moving parts can pose a pinch hazard.
• Pneumatic Spring: The height adjustment mechanism uses a pneumatic spring. Do not attempt to disassemble or tamper with the spring mechanism.

Senarai Bahagian

Sebelum memulakan pemasangan, sahkan bahawa semua bahagian ada dan tidak rosak. Rujuk rajah di bawah untuk pengenalan.

Figure 1: Fully assembled BONTEC Mobile Standing Desk.

Figure 2: Product dimensions including desktop, keyboard tray, and height range.

Komponen biasa termasuk:

• Permukaan Desktop
• Dulang Papan Kekunci
• Main Support Column (with pneumatic spring)
• "H"-shaped Base
• Mengunci Kastor (x4)
• Cangkuk Beg
• Perkakasan Pemasangan (skru, sepana, dll.)

Persediaan dan Perhimpunan

All necessary tools for assembly are included. It is recommended to assemble the desk on a soft, clean surface to prevent scratches.

1. Buka Pembungkusan Komponen: Carefully remove all parts from the packaging and lay them out. Check against the parts list to ensure everything is present.
2. Pasang Kastor ke Pangkalan: Securely screw the four locking casters into the designated holes on the "H"-shaped base. Ensure they are tightened to prevent wobbling.
3. Assemble Main Column to Base: Attach the main support column to the "H"-shaped base using the provided screws and tools. Ensure the connection is firm and stable.
4. Install Keyboard Tray Supports: Fasten the keyboard tray supports to the main column or desktop assembly as indicated in the diagrams.
5. Pasangkan Dulang Papan Kekunci: Slide or attach the keyboard tray onto its supports. Ensure it can retract and extend smoothly.
6. Pasang Desktop: Secure the desktop surface to the top of the main support column. Pay attention to the orientation for the integrated slot and keyboard tray alignment.
7. Attach Bag Hook: Install the bag hook on the side of the main column as desired.
8. Semakan Akhir: Once assembled, gently shake the desk to ensure all connections are secure and there is no excessive wobble.

Figure 3: Close-up of special features including the convenient slot, bag hook, "H"-shaped frame base, and mute wheels.

Arahan Operasi

Pelarasan Ketinggian

The desk features a pneumatic spring for smooth and effortless height adjustment, allowing you to switch between sitting and standing positions.

• Untuk Melaraskan Ke Atas: Press the lever located under the desktop with your hand. The pneumatic spring will provide an upward force. Release the lever at your desired height.
• Untuk Melaraskan Ke Bawah: Press the lever with your hand and simultaneously apply downward pressure on the desktop. Release the lever at your desired height.

Figure 4: Illustration of the energy-saving gas spring mechanism for height adjustment, showing the lever and internal components.

Figure 5: Demonstrates the minimum (28.3 inches) and maximum (44 inches) height settings for sitting and standing use.

Using the Keyboard Tray

The keyboard tray is retractable, providing flexibility for your workspace setup.

• Untuk Memperluas: Gently pull the keyboard tray outwards until it reaches its full extension.
• Untuk Menarik Balik: Push the keyboard tray inwards until it is fully tucked under the desktop.

Rajah 6: Atas-bawah view showing the generous desktop storage, including the integrated slot for tablets or phones, and the keyboard tray.

Mobility and Locking Casters

The four rolling casters allow for easy movement of the desk. Each caster is equipped with a locking mechanism.

• Untuk bergerak: Ensure all casters are unlocked. Gently push the desk to your desired location.
• Untuk Selamatkan: Once the desk is in position, press down on the locking lever on each caster to prevent movement.

Penyelenggaraan dan Penjagaan

Proper care will ensure the longevity of your BONTEC Mobile Standing Desk.

• Pembersihan: The MDF desktop is waterproof and scratch-resistant. Wipe surfaces with a soft, damp kain. Elakkan pembersih yang melelas atau bahan kimia yang keras.
• Perkakasan: Periksa semua skru dan pengikat secara berkala untuk memastikan ia kekal ketat. Ketatkan semula jika perlu.
• Kastor: Keep casters free of dust and debris to ensure smooth rolling.
• Pneumatic Spring: No special maintenance is required for the pneumatic spring. Do not lubricate or attempt to open the mechanism.

Menyelesaikan masalah

Jika anda menghadapi sebarang masalah dengan meja anda, rujuk masalah dan penyelesaian biasa berikut:

Jika masalah berterusan, sila hubungi sokongan pelanggan.

Spesifikasi Produk

Maklumat Waranti

BONTEC products are manufactured to high-quality standards. For specific warranty details and terms, please refer to the warranty card included with your product or visit the official BONTEC webtapak. Simpan resit pembelian anda untuk tuntutan waranti.

Sokongan Pelanggan

If you have any questions, require assistance with assembly, or need to report a damaged part, please contact BONTEC customer support. Contact information can typically be found on the product packaging or the official BONTEC webtapak.

Untuk maklumat lanjut, lawati BONTEC Store on Amazon.