ENGiNDOT PG02 Biometric Gun Safe Instruction Manual

pengenalan

This manual provides essential instructions for the safe and effective use of your ENGiNDOT PG02 Biometric Gun Safe. Please read this manual thoroughly before installation and operation to ensure proper functionality and security. Keep this manual for future reference.

Maklumat Keselamatan

WARNING: ALWAYS TEST ALL SAFE FUNCTIONALITY BEFORE USE.

• Pastikan peti besi dipasang dengan selamat untuk mengelakkan pengalihan yang tidak dibenarkan.
• Keep emergency keys in a secure location away from the safe and out of reach of children.
• Do not store the safe's keys or codes inside the safe itself.
• Regularly check battery levels to ensure continuous operation.
• This safe is designed to store firearms and valuables securely, keeping them away from children and unauthorized individuals.

Image: A child reaching into a drawer, illustrating the importance of keeping firearms securely stored away from children.

Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej anda:

• ENGiNDOT Gun Safe (PG02)
• Emergency Key (x2)
• Mounting Bolt (x2)
• AA Battery (1.5V) (x4)
• Manual Pengguna

Ciri-ciri Produk

• 3-Way Entry: Access via registered fingerprint, 4-6 digit PIN code, or emergency key.
• Biometric Fingerprint Sensor: Swedish high-recognition sensitivity sensor for quick and accurate unlocking from various angles.
• Pad Kekunci Digital: Backlit keyboard with larger protruding keys for easy access, even in low light.
• Auto-Open Lid: Provides quick access to contents.
• Lampu Dalaman LED: Illuminates the safe's interior for visibility at night.
• Sound On/Off Mode: Allows for silent operation when needed.
• Pembinaan Teguh: Heavy gauge alloy steel with metal oxide coating for durability and corrosion prevention.
• kapasiti: Designed to securely store up to two handguns and ammunition.
• Pilihan Pemasangan: Pre-drilled holes and mounting hardware included for securing in drawers or closets.
• Sistem Penggera: Integrated alarm for enhanced security.

Image: Diagram highlighting key features of the ENGiNDOT PG02 Biometric Gun Safe, including the fingerprint scanner, backlit keypad, LED light, wave pattern padded foam, reset button, backup key, and battery compartment.

Image: Close-up of the fingerprint scanner on the ENGiNDOT PG02 safe, illustrating its high accuracy unlocking capability.

Imej: Selesaiview of the ENGiNDOT PG02 safe, highlighting its capacity for 2 guns and ammunition, 3-way access, easy programming, sound on/off, 16 gauge steel construction, and alarm/lock functions.

Persediaan

1. Akses Awal dan Pemasangan Bateri

1. Upon first use, open the safe using one of the provided emergency keys. Locate the keyhole cover, slide it to the left, insert the emergency key, and turn it clockwise to unlock.
2. With the safe open, locate the battery compartment. Insert 4 AA (1.5V) batteries, ensuring correct polarity.
3. Tutup penutup petak bateri.
4. Nota: If you hear 6 continuous beeps and see the yellow light flash, it indicates low battery. Replace batteries immediately.

2. Memasang Peti Keselamatan

The safe includes pre-drilled holes and mounting hardware for secure installation. Choose a suitable location, such as inside a drawer or closet, and use the provided bolts to fix the safe in place.

Arahan Operasi

1. Menetapkan Kod Pengguna

1. With the safe door open, press the reset button once. The blue light will flash with two buzzer beeps, indicating it's ready for code setting.
2. Input your new 4-6 digit code using the keypad.
3. Press the reset button again to confirm. The blue light will stay on with one long buzzer beep, indicating the new code is successfully set.
4. Awas: The initial user code is "1234". If an incorrect code is entered 5 times continuously, the red light will flash with two buzzer beeps, and the alarm system will activate.

Image: Close-up of the digital keypad and emergency keyhole, demonstrating the 4-6 digit PIN code and high-security B-rated key lock options.

2. Setting Fingerprints

1. With the safe door open, press the reset button once. The blue light will flash with two buzzer beeps.
2. Place your finger on the fingerprint collector to begin setting.
3. After hearing one buzzer beep, remove your finger and press again. Repeat this process 3 times in total.
4. One long buzzer beep signifies successful fingerprint registration. You can register up to 20 fingerprints.

3. Menghidupkan/Mematikan Bunyi

• Press the "1" button for 3 seconds to turn the sound ON or OFF. The blue light will flash to confirm the change.
• The sound will be normal again after cutting off the power (e.g., removing batteries).

Penyelenggaraan

• Keep the safe clean and free from dust and debris, especially around the keypad and fingerprint sensor.
• Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
• Check the battery level regularly and replace all four AA batteries when the low battery warning is indicated.
• Ensure the safe is always closed and locked when not in use to maintain security.

Menyelesaikan masalah

If you encounter issues with your ENGiNDOT PG02 Biometric Gun Safe, please refer to the following common solutions:

• Safe not opening with code/fingerprint:
  • Ensure batteries are not low (check for 6 continuous beeps and yellow light flashes). Replace if necessary.
  • Verify the correct code is being entered.
  • Ensure your finger is placed correctly and completely on the fingerprint sensor.
  • If all else fails, use the emergency key to open the safe.
• Penggera berbunyi tanpa diduga:
  • The alarm activates after 5 continuous incorrect code or fingerprint entries. Wait for the alarm to cease or use the emergency key to open and reset.
• Sound not turning on/off:
  • Ensure you are pressing the "1" button for the full 3 seconds.
  • If the sound setting is not retained, check battery levels.

Spesifikasi

Image: Diagram showing the exterior and interior dimensions of the ENGiNDOT PG02 Biometric Gun Safe.

Waranti dan Sokongan

ENGiNDOT provides worry-free customer support. If you encounter any problems or have questions regarding your PG02 Biometric Gun Safe, please feel free to contact us. We commit to responding within 24 hours to assist you.

For further assistance, please visit the official ENGiNDOT store: ENGiNDOT Store