LEDONE Full Cut Off 60W LED Wall Pack Light

1. Pengenalan

This manual provides essential information for the safe installation, operation, and maintenance of your LEDONE Full Cut Off 60W LED Wall Pack Light. Please read these instructions thoroughly before installation and retain them for future reference. This fixture is designed for outdoor use in commercial and industrial settings, featuring a full cut-off design to minimize light pollution and a built-in photocell for dusk-to-dawn operation.

Imej 1.1: Bahagian hadapan view of the LEDONE 60W Full Cut Off LED Wall Pack Light. This image displays the fixture's dark bronze housing and the array of LED lights behind a clear, tempered glass lens.

2. Maklumat Keselamatan

• AMARAN: Risiko renjatan elektrik. Putuskan sambungan kuasa pada fius atau pemutus litar sebelum pemasangan atau servis.
• Pemasangan mesti dilakukan oleh juruelektrik bertauliah mengikut semua kod elektrik nasional dan tempatan.
• Pastikan bekalan voltage is compatible with the fixture (120-277V AC).
• Jangan kendalikan wayar hidup.
• Pakai cermin mata dan sarung tangan keselamatan semasa pemasangan.
• Pastikan lekapan dipasang dengan selamat untuk mengelakkan terjatuh.
• Do not attempt to modify the fixture. Any modifications will void the warranty.

3. Kandungan Pakej

Verify that all components are present and undamaged before installation.

• 1 x LEDONE Full Cut Off 60W LED Wall Pack Light Fixture
• Mounting Hardware (screws, anchors, gaskets)
• Manual Arahan (dokumen ini)

4. Spesifikasi

Image 4.1: Dimensional drawing of the LEDONE 60W Wall Pack Light, showing measurements of 11.5 inches (293mm) in length, 10.8 inches (275mm) in width, and 3.9 inches (100mm) in height.

5. Persediaan & Pemasangan

Sebelum Anda Bermula:

• Matikan kuasa pada pemutus litar atau kotak fius.
• Pastikan permukaan pelekap kukuh dari segi struktur dan boleh menyokong berat lekapan.
• Have necessary tools ready: screwdriver, wire strippers, drill, sealant (if required for weatherproofing).

Arahan Pemasangan:

1. Carefully remove the fixture from its packaging.
2. Detach the mounting plate from the back of the fixture.
3. Position the mounting plate on the desired wall location. Mark the drilling points for the mounting screws.
4. Tebuk lubang pandu dan masukkan sauh yang sesuai jika perlu.
5. Secure the mounting plate to the wall using the provided screws. Ensure it is level and tight.

Imej 5.1: Belakang view of the LEDONE 60W Wall Pack Light, illustrating the integrated mounting bracket and conduit entry point for electrical wiring.

Arahan pendawaian:

6. Feed the electrical supply wires through the conduit entry point on the mounting plate.
7. Connect the fixture's wires to the supply wires using appropriate wire connectors:
   • Black wire (Fixture) to Live/Hot wire (Supply)
   • White wire (Fixture) to Neutral wire (Supply)
   • Green/Ground wire (Fixture) to Ground wire (Supply)
8. Pastikan semua sambungan selamat dan terlindung dengan betul.
9. Carefully tuck all wires into the junction box or mounting plate cavity.
10. Attach the fixture body to the mounting plate, ensuring a tight seal to maintain IP65 rating. Secure with screws.
11. Apply silicone sealant around the edges of the fixture and conduit entry points if necessary to prevent water ingress.
12. Pulihkan kuasa pada pemutus litar.

6. Arahan Operasi

This LED wall pack light is equipped with a built-in photocell for automatic dusk-to-dawn operation. No manual intervention is required after installation.

• Fungsi Senja hingga Subuh: The integrated photocell sensor detects ambient light levels. The fixture will automatically turn ON when natural light falls below a certain threshold (dusk) and turn OFF when sufficient natural light is detected (dawn).
• Rotatable Fixture: The fixture can be rotated by 15 degrees to adjust the light direction. This adjustment should be made during installation or maintenance when power is OFF. Loosen the appropriate screws, adjust the angle, and re-tighten securely.

Image 6.1: LEDONE 60W Wall Pack Lights installed on the exterior of a commercial building at night, demonstrating their effective illumination for large outdoor areas.

7. Penyelenggaraan

The LEDONE Wall Pack Light is designed for minimal maintenance. Regular inspection and cleaning will ensure optimal performance and longevity.

• Pembersihan: Periodically clean the exterior of the fixture, especially the lens and photocell, with a soft, damp cloth to remove dirt, dust, and debris. Ensure power is OFF before cleaning. Do not use abrasive cleaners or solvents.
• Pemeriksaan: Annually inspect the fixture for any signs of damage, loose wiring, or corrosion. Ensure all mounting screws are tight.
• Photocell: Keep the photocell sensor clear of obstructions (e.g., leaves, dirt, paint) to ensure proper dusk-to-dawn operation.

8. Penyelesaian masalah

9. Maklumat Waranti

The LEDONE Full Cut Off 60W LED Wall Pack Light is covered by a Waranti Terhad. This product is designed for a long operational life of approximately 50,000 hours. For specific warranty terms and conditions, please refer to the warranty documentation provided at the time of purchase or contact LEDONE customer service.

10. Sokongan

LEDONE is committed to providing quality lighting solutions and customer service. If you have any questions, require technical assistance, or need to report an issue with your product, please contact LEDONE customer support. Our team is based in California and ready to assist you.

For further assistance, please visit the official LEDONE webtapak atau rujuk dokumentasi pembelian anda untuk butiran hubungan.