SoloGood 20A ESC Brushless Electronic Speed Controller User Manual

pengenalan

This manual provides essential information for the proper installation, operation, and maintenance of your SoloGood 20A ESC Brushless Electronic Speed Controller. Designed for FPV drones, QAV drones, multirotors, and quadcopters, this ESC features BLHeli_S firmware and DSHOT support for reliable performance. Please read this manual thoroughly before use to ensure safe and optimal functionality.

Ciri-ciri Utama

• 20A Continuous Current: Capable of handling 20 Amperes of continuous current.
• Brushless Motor Compatibility: Designed for use with brushless motors.
• DSHOT Support: Supports DSHOT digital throttle protocols (DSHOT150, DSHOT300, DSHOT600) for precise motor control.
• BLHeli_S Firmware: Pre-installed with BLHeli_S firmware, allowing for easy updates and configuration via the ESC signal cable.
• Lebar Voltage Julat: Compatible with 2-4S LiPo batteries.
• Komponen Berkualiti Tinggi: Utilizes original components to ensure high-quality current capability and reliability.
• Optimized for Multi-axis: Specifically optimized for multi-axis aircraft, also suitable for fixed-wing and helicopters.
• Twisted Pair Signal Cable: The throttle signal cable is a twisted pair, effectively reducing crosstalk during signal transmission.
• Adjustable Throttle Range: Throttle range can be configured to be compatible with various receivers, providing smooth and delicate speed control.
• Saiz padat: Small dimensions (24mm x 12.7mm) for easy integration into various builds.

Spesifikasi

Image: SoloGood 20A ESC showing its compact dimensions of 24mm in length and 12.7mm in width.

Image: Four SoloGood 20A ESC units placed on a digital scale, indicating a combined weight of 19 grams, highlighting their lightweight design.

Arahan Persediaan

Pemasangan yang betul adalah penting untuk prestasi dan keselamatan dron anda. Ikuti langkah-langkah ini dengan teliti:

1. Mounting the ESCs: Securely mount each ESC to your drone frame. Ensure good airflow for cooling. Avoid placing them near sensitive electronics without proper insulation.
2. Sambungan Motor: Connect the three motor wires from each ESC to the corresponding motor. The order of connection determines the motor's rotation direction. If a motor spins in the wrong direction, you can swap any two of the three motor wires, or reverse it in the BLHeli_S configurator.
3. Sambungan Kuasa: Connect the main power wires (red for positive, black for negative) from the ESC to your Power Distribution Board (PDB) or flight controller, ensuring correct polarity. These ESCs are designed for 2-4S LiPo batteries.
4. Sambungan Isyarat: Connect the signal wire (typically white) from each ESC to the appropriate motor output pin on your flight controller. The twisted pair signal cable helps reduce electrical noise.
5. Receiver Link: The small black connector on the signal wire is for linking to the receiver. Connect this to the appropriate channel on your flight controller or receiver if direct connection is required for setup/flashing.

Image: A single SoloGood 20A ESC unit, showing the power wires (red and black), signal wire (white), and the small black connector for receiver linkage, crucial for initial setup and configuration.

Imej: Atas ke bawah view of the SoloGood 20A ESC, illustrating the compact circuit board and the attached power and signal wires.

Imej: Bawah view of two SoloGood 20A ESCs, revealing the MOSFETs and other electronic components that contribute to its high-quality current capability.

Image: Two SoloGood 20A ESCs displayed side-by-side, showcasing their identical design and compact form factor.

Image: Two SoloGood 20A ESCs with their signal wires twisted, illustrating the design feature that reduces signal crosstalk.

Image: A diagram detailing the various throttle protocols supported by the ESC, including DSHOT 600/300/150, PWM, Oneshot125, Oneshot42, and Multishot.

Imej: Jarak dekat view of the ESC's internal chip (MCU EMF8BB21F16G), highlighting its MOSFET power delivery for reliability and the BLHeli_S firmware.

Arahan Operasi

Once installed, the ESCs work in conjunction with your flight controller to manage motor speed and direction.

1. Konfigurasi Perisian Tegar: Use the BLHeli_S Suite software to configure ESC settings. This allows for fine-tuning parameters such as motor direction, DSHOT protocol selection, and other advanced settings. The ESC can be flashed or upgraded via the signal cable.
2. Penentukuran Pendikit: Perform throttle calibration if necessary, following your flight controller's specific instructions. This ensures the ESCs accurately interpret the throttle signals from the flight controller.
3. Semakan Pra-Penerbangan: Before each flight, ensure all connections are secure and motors spin freely. Verify motor direction matches your flight controller's configuration.
4. Operasi Penerbangan: The ESCs will automatically respond to commands from your flight controller, translating throttle inputs into motor speed adjustments for stable and responsive flight.

Image: A drone equipped with SoloGood 20A ESCs, illustrating a typical installation scenario for FPV QAV Drone Multirotor Quadcopters.

Imej: Satu lagi view of a drone with the SoloGood 20A ESCs integrated, demonstrating how they fit into a multirotor build.

Penyelenggaraan

To ensure the longevity and optimal performance of your ESCs, consider the following maintenance tips:

• Pemeriksaan Berkala: Periodically inspect the ESCs for any signs of physical damage, loose connections, or burnt components.
• Kebersihan: Keep the ESCs free from dust, dirt, and moisture. Use compressed air or a soft brush to clean them.
• Pengurusan Haba: Ensure adequate airflow around the ESCs during operation to prevent overheating. Overheating can lead to reduced performance and premature failure.
• Kemas kini Firmware: Check for and apply BLHeli_S firmware updates as they become available. Updates often include performance improvements and bug fixes.

Menyelesaikan masalah

If you encounter issues with your SoloGood 20A ESCs, refer to the following common problems and solutions:

• Motor Tidak Berputar:
  • Check all motor and signal wire connections for looseness or incorrect polarity.
  • Verify that the ESC is receiving power from the battery.
  • Ensure the motor is not physically obstructed.
  • Check BLHeli_S settings for motor direction and protocol.
• Erratic Motor Behavior:
  • Ukur semula julat pendikit.
  • Inspect signal wires for damage or interference; the twisted pair design helps, but external factors can still affect it.
  • Ensure the ESC firmware is up to date and settings are correct for your motor and flight controller.
• ESC Terlalu Panas:
  • Check for proper ventilation and airflow around the ESCs.
  • Ensure the motor/propeller combination is not drawing excessive current beyond the ESC's 20A rating.
  • Sahkan bahawa voltan bateritage is within the 2-4S LiPo range.
• No Power to ESC:
  • Periksa sambungan bateri dan tahap pengecasan.
  • Inspect power wires for breaks or shorts.
  • Verify connections to the PDB or flight controller.

Waranti dan Sokongan

SoloGood products are designed for reliability and performance. For specific warranty details, please refer to the purchase documentation or contact your retailer. For technical support, firmware updates, and additional resources, please visit the official SoloGood webtapak atau hubungi perkhidmatan pelanggan mereka. Simpan resit pembelian anda sebagai bukti pembelian untuk sebarang tuntutan waranti.

Manufacturer: SoloGood

Umur Disyorkan: 14 tahun dan ke atas