LEDVANCE Linear LED Shelf Light 400mm

1. Pengenalan

This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE Linear LED Shelf Light. This versatile lighting solution is designed for various indoor applications, including kitchens, workspaces, and bathrooms (IP44 rated areas). It features a sleek design, uniform light distribution, and a long operational lifespan.

Sila baca manual ini dengan teliti sebelum pemasangan dan simpan untuk rujukan masa hadapan.

2. Arahan Keselamatan

• Keselamatan Elektrik: Pemasangan mesti dilakukan oleh juruelektrik yang berkelayakan atau orang yang kompeten mengikut kod dan peraturan elektrik tempatan. Sentiasa putuskan bekalan elektrik pada pemutus litar utama sebelum pemasangan, penyelenggaraan atau pembaikan.
• Penggunaan yang Dimaksudkan: This product is designed for indoor lighting only. Do not use it in outdoor environments or areas not specified in the product description.
• Penilaian IP44: The IP44 rating indicates protection against solid objects larger than 1mm and splashing water from any direction. This makes it suitable for use in bathrooms (Zone 2 and 3) and kitchens, but it is not submersible.
• Sumber Cahaya: This product contains a non-replaceable LED light source of energy efficiency class E. Do not attempt to replace the LED module yourself.
• Pengendalian: Avoid direct contact with the light source when the fixture is powered on, as it may be hot. Do not cover the fixture with insulating material.
• Pembersihan: Only clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• 1 x LEDVANCE Linear LED Shelf Light (400mm)
• Complete mounting accessories (screws, wall plugs)
• Aksesori sambungan

4. Spesifikasi

Catatan: Spesifikasi boleh berubah tanpa notis.

5. Persediaan dan Pemasangan

The LEDVANCE Linear LED Shelf Light is designed for easy and quick wall mounting. Follow these steps carefully:

1. Sediakan Kawasan Pemasangan: Choose a suitable location for mounting, ensuring it is a dry, stable surface. For bathroom installations, ensure compliance with local wiring regulations for IP44 rated fixtures.
2. Putuskan Kuasa: Before starting any electrical work, turn off the power supply at the main circuit breaker to prevent electric shock.
3. Tandakan Titik Penggerudian: Hold the fixture against the wall at the desired mounting position. Use a pencil to mark the locations for drilling holes for the mounting brackets. Refer to the product dimensions for accurate placement.

4. Lubang gerudi: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert the provided wall plugs into the drilled holes.
5. Pasang Kurungan Pemasangan: Secure the mounting brackets to the wall using the provided screws. Ensure they are firmly attached.
6. Sambungan Elektrik: Connect the fixture's electrical wires to your household wiring. Follow the wiring diagram provided with the product. Ensure all connections are secure and insulated. This fixture is designed for AC power.
7. Pasang Lekapan: Carefully attach the LED shelf light to the installed mounting brackets. Ensure it clicks securely into place.
8. Pulihkan Kuasa: Once the fixture is securely mounted and wired, restore power at the main circuit breaker.

6. Arahan Operasi

This LED shelf light is equipped with an integrated PIR motion detector and a daylight sensor for automatic operation.

• Operasi automatik: The light will automatically turn on when motion is detected within its range and ambient light levels are below a certain threshold (daylight sensor).
• Matikan automatik: The light will automatically turn off after a period of no motion detection, or when sufficient ambient light is present.
• Peletakan Sensor: Ensure the motion sensor is not obstructed to allow for optimal detection. Avoid placing the fixture near heat sources or in direct sunlight, which could interfere with sensor performance.

7. Penyelenggaraan

The LEDVANCE Linear LED Shelf Light requires minimal maintenance.

• Pembersihan: To clean the fixture, ensure the power is off. Wipe the surface with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or sprays directly on the fixture.
• Pemeriksaan: Periodically inspect the fixture and wiring for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified technician.
• Sumber Cahaya: The LED light source is integrated and not user-replaceable. If the light source fails, the entire fixture must be replaced.

8. Penyelesaian masalah

If you encounter issues with your LEDVANCE Linear LED Shelf Light, refer to the following common problems and solutions:

• Lampu Tidak Dihidupkan:
  • Periksa sama ada bekalan kuasa disambungkan dan pemutus litar dihidupkan.
  • Ensure the wiring connections are secure.
  • Verify that the ambient light is low enough for the daylight sensor to activate the light.
  • Check if motion is being detected by the PIR sensor.
• Cahaya Kekal Menyala Berterusan:
  • Pastikan tiada gerakan berterusan dalam julat pengesanan sensor.
  • Check if the daylight sensor is being obstructed or if it's in a consistently dark area.
• Cahaya Berkelip atau Berkelip:
  • Disconnect power and check all electrical connections for looseness or damage.
  • Pastikan voltage supply is stable and within the specified range (240V).

Jika langkah-langkah ini tidak menyelesaikan masalah, hubungi khidmat pelanggan.

9. Waranti dan Sokongan

This LEDVANCE Linear LED Shelf Light comes with a Jaminan 2 tahun dari tarikh pembelian, meliputi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa.

For warranty claims, technical support, or further assistance, please contact LEDVANCE customer service through their official weblaman web atau peruncit tempat produk dibeli. Sila sediakan bukti pembelian dan nombor model produk anda.