EVERYBOT Three-Spin Robot Mop TS300 Instruction Manual

1. Pengenalan

Thank you for choosing the EVERYBOT Three-Spin Robot Mop. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.

Figure 1: EVERYBOT Three-Spin Robot Mop TS300

2. Apa yang ada di dalam Kotak

Sahkan bahawa semua komponen hadir semasa menyahkotak:

• EVERYBOT Three-Spin Robot Mop
• Mengecas Buaian
• Alat Kawalan Jauh
• Penyesuai Kuasa
• Mother-Yarn Mop Pads (for intensive mopping)
• Microfiber Mop Pads (for fine dust and polishing)
• Tangki Air
• Manual Pengguna

3. Persediaan

3.1 Mengecas Peranti

1. Place the charging cradle against a wall in an open area.
2. Connect the power adapter to the charging cradle and a power outlet.
3. Align the robot mop with the charging cradle. The device will automatically dock and begin charging. The battery indicator lights will illuminate.

3.2 Preparing Mop Pads

1. Select the appropriate mop pads (Mother-Yarn for intensive cleaning, Microfiber for polishing).
2. Lembapkan pad mop dengan air dan perah dengan teliti untuk mengeluarkan air berlebihan.
3. Attach the moistened pads to the rotating discs on the underside of the robot mop. They attach via Velcro.

3.3 Mengisi Tangki Air

1. Open the water tank cover located on the top of the robot mop.
2. Keluarkan tangki air.
3. Fill the tank with clean tap water. Do not add hot water or cleaning detergents to the tank, as this may damage the device or leave residue on your floors.
4. Securely close the water tank cap and reinsert the tank into the robot mop. Close the water tank cover.

Figure 2: Water Tank Filling Guidelines

4. Operasi

4.1 Menghidupkan/Mematikan

• To power on: Press and hold the power button on the device for approximately 3 seconds.
• Untuk mematikan: Tekan dan tahan butang kuasa selama lebih kurang 3 saat.

4.2 Mod Pembersihan

The EVERYBOT Three-Spin offers 7 selectable cleaning modes via the remote control:

• Pembersihan Automatik: Basic mode for efficient room cleaning.
• Pembersihan Intensif: Repeats short forward movements and 360-degree rotations for meticulous cleaning.
• Focused Cleaning: Intensively cleans the nearby area based on the robot's current location.
• Pembersihan Tepi: Directs the robot along walls and furniture edges.
• 50-minute Cleaning: Cleans for a set duration, suitable for separate rooms.
• Y-Mode Cleaning: Follows a Y-shaped pattern for thorough coverage.
• Pembersihan Manual: Allows direct control of the robot's movement using the remote.

Figure 3: Remote Control for Mode Selection

Figure 4: Visual Representation of Cleaning Modes

4.3 Ciri Pintar

• Operasi Ultra Senyap: Beroperasi pada tahap hingar ultra rendah 43 dB.
• No-Wheel Structure: The 4.4 lb weight provides direct pressure for effective cleaning.
• Penderia Pintar: Equipped with 11 anti-collision and fall prevention sensors to navigate safely and avoid obstacles or drops.
• Automatic Water Supply: The 300ml water tank automatically supplies water to the mops to maintain dampness.

Figure 5: Quiet Operation (43 dB)

Figure 6: Obstacle Avoidance with Smart Sensors

5. Penyelenggaraan

5.1 Membersihkan Pad Mop

After each use, remove the mop pads. They can be hand-washed with water or machine-washed according to their care instructions. Ensure they are clean and dry before reattaching.

5.2 Penderia Pembersihan

Periodically wipe the 11 anti-collision and fall prevention sensors with a soft, dry cloth to ensure optimal performance.

5.3 Penjagaan Tangki Air

Empty any remaining water from the tank after each use. Clean the tank regularly with water to prevent buildup. Do not use harsh chemicals.

6. Panduan Penyelesaian Masalah

If the red light flashes and error sounds persist, try the following steps:

1. Matikan: Press the power switch for more than 3 seconds to turn off the device.
2. Pengurusan Sensor: Remove any plastic film attached to the sensors. If there is dust or debris on the sensor, gently wipe it with a soft cloth.
3. Attach Mop Properly: Moisten the mop in water and wring it thoroughly. Attach the mop to the rotating disc slot. If the mop is too wet or not properly attached, the product may not operate correctly.

7. Spesifikasi

8. Video Produk

9. Waranti dan Sokongan

For warranty information, technical support, or to purchase replacement parts, please refer to the official EVERYBOT weblaman web atau hubungi khidmat pelanggan. Simpan resit pembelian anda untuk tuntutan jaminan.