JOOWIN WiFi Extender 03 User Manual

1. Pengenalan

This user manual provides comprehensive instructions for the setup, operation, and maintenance of your JOOWIN WiFi Extender 03. Please read this manual carefully before using the device to ensure optimal performance and to prevent damage.

Image: The JOOWIN WiFi Extender 03, a white rectangular device with four adjustable external antennas. It features indicator lights and the JOOWIN logo on its front face, with blue arcs indicating wireless signal propagation.

2. Kandungan Pakej

Sila sahkan bahawa semua item terdapat dalam pakej anda:

• 1x JOOWIN WiFi Extender 03
• 1x Kabel Rangkaian
• 1x Panduan Pemasangan

3. Arahan Persediaan

3.1. Menghidupkan

1. Plug the JOOWIN WiFi Extender into a standard electrical outlet.
2. Wait for the power indicator light to turn solid, indicating the device is ready.

3.2. Configuration Modes

The extender supports two main modes: Repeater Mode and AP Mode.

3.2.1. Repeater Mode (Extending Existing WiFi)

1. Connect your computer or mobile device to the extender's default Wi-Fi network (e.g., "JOOWIN_XXXX"). No password is required initially.
2. Buka a web pelayar dan masukkan alamat IP lalai (cth, 192.168.10.1) atau nama domain (cth., it.joowin.com) ke dalam bar alamat.
3. Log in using the default username and password (usually "admin" for both).
4. Select "Repeater Mode" from the setup wizard.
5. Scan for available Wi-Fi networks and select your home network.
6. Enter your home network's Wi-Fi password.
7. Assign a new SSID (network name) for the extended network or keep it the same as your main network.
8. Click "Apply" or "Save" and wait for the extender to restart.
9. Relocate the extender to an optimal position between your router and the desired coverage area.

3.2.2. AP Mode (Access Point)

1. Connect the extender to your router using the provided network cable. Plug one end into the extender's RJ45 port and the other into a LAN port on your router.
2. Connect your computer or mobile device to the extender's default Wi-Fi network.
3. Buka a web browser and enter the default IP address or domain name.
4. Log masuk menggunakan nama pengguna dan kata laluan lalai.
5. Select "AP Mode" from the setup wizard.
6. Configure the new Wi-Fi network name (SSID) and password for the access point.
7. Click "Apply" or "Save" and wait for the extender to restart.

4. Mengendalikan Peranti

4.1. Lampu Penunjuk

The device features several indicator lights to show its status:

• Lampu Kuasa: Solid indicates power on.
• WPS Light: Blinking indicates WPS pairing in progress. Solid indicates successful connection.
• Lampu isyarat: Indicates the strength of the signal received from the main router (in Repeater Mode). More lights typically mean a stronger signal.

4.2. WPS Function

The WPS (Wi-Fi Protected Setup) button allows for easy connection to your main router without manual configuration:

1. Tekan butang WPS pada penghala utama anda.
2. Within two minutes, press the WPS button on the JOOWIN WiFi Extender.
3. The WPS light on the extender will blink and then turn solid upon successful connection.

5. Penyelenggaraan

5.1. Kemas Kini Perisian Tegar

Periodically check the JOOWIN official website for firmware updates to ensure optimal performance and security. Firmware updates can typically be installed via the web antara muka pengurusan.

5.2. Pembersihan

Clean the device with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure the device is unplugged before cleaning.

5.3. Menetapkan Semula Peranti

If you encounter persistent issues or wish to reconfigure the device from scratch, you can perform a factory reset:

• With the extender powered on, use a paperclip or a thin object to press and hold the reset button (usually located in a small pinhole) for approximately 5-10 seconds.
• Release the button when the indicator lights flash, indicating the device is resetting.
• The extender will revert to its factory default settings.

6. Penyelesaian masalah

7. Spesifikasi

8. Waranti dan Sokongan

8.1. Maklumat Waranti

JOOWIN products typically come with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official JOOWIN webtapak untuk terma dan syarat waranti terperinci khusus untuk wilayah anda.

8.2. Sokongan Teknikal

For technical assistance, troubleshooting, or further inquiries, please contact JOOWIN customer support through their official website or the contact information provided in your product packaging. When contacting support, please have your model number (JW-WR758AC-UKWS-02) and purchase details ready.