SALCAR LU4 2m Christmas Tree String Lights with Star Topper Instruction Manual

pengenalan

Thank you for choosing the SALCAR LU4 Christmas Tree String Lights. This product is designed to provide a festive and warm ambiance for your indoor Christmas tree. Please read this manual carefully before installation and use to ensure safe and optimal performance.

SALCAR Christmas Tree String Lights illuminating a decorated Christmas tree in a living room.

Image: SALCAR Christmas Tree String Lights installed on a Christmas tree.

Maklumat Keselamatan

Produk ini bertujuan untuk kegunaan dalaman sahaja. The IP20 waterproof rating means it is not protected against water spray or immersion.
Ensure the power source is 4.5V USB. Do not use chargers with higher voltage.
Keep away from children and pets during installation and operation to prevent entanglement or damage.
Do not attempt to modify or repair the lights. Contact customer support if issues arise.
Unplug the lights from the USB power source when not in use or before cleaning.
The LEDs generate low heat, making them safe to touch after prolonged use.

Kandungan Pakej

Sahkan bahawa semua komponen terdapat dalam pakej:

1x SALCAR Christmas Tree String Lights (2m with 10 strands, 210 LEDs)
1x Tree Topper Star (integrated with lights)
1x USB Power Cable (5m length)
1x Alat Kawalan Jauh
1x Manual Pengguna

SALCAR Christmas Tree String Lights package contents including the string lights, star topper, USB cable, remote control, and user manual.

Image: Contents of the SALCAR Christmas Tree String Lights package.

Spesifikasi

Nombor Model	LU4
Panjang	2 meters (for trees 1.5m to 2.8m tall)
Bilangan Strands	10
Jumlah LED	210 (20 LEDs per strand, 10 LEDs on tree topper star)
Warna LED	Putih Hangat (2700K)
Warna Kabel	Hijau Gelap
Antara Muka Kuasa	USB (4.5V, 450mA)
Penggunaan Kuasa	1.9 Watt
Penilaian Kalis Air	IP20 (Kegunaan Dalaman Sahaja)
Jarak Pencahayaan	10 cm between LEDs
Panjang Kabel Kuasa	5 meter
Star Topper Size	15 cm (6 inci)
Fungsi Kawalan Jauh	9 lighting modes, dimming, timer
Berat badan	330 gram

Diagram showing the dimensions of the SALCAR Christmas Tree String Lights, including the 5m power cable, 2m light strands, 10cm LED spacing, and 5.5cm flat stars.

Image: Dimensional diagram of the string lights.

Energy label for SALCAR LU4 showing energy efficiency class G and 1 kWh per 1000 hours.

Image: Energy label for the product. For more details, visit sekeygroup.com/Energielabel.

Arahan Persediaan

Buka Bungkus Lampu: Carefully remove the string lights and all components from the packaging. Untangle the strands gently.
Position the Tree Topper: Place the integrated star topper at the very top of your Christmas tree. The ring at the base of the star should rest securely on the top branch.
Unroll the Strands: Allow the 10 individual light strands to hang down naturally around the tree. Distribute them evenly for optimal coverage.
Sambungkan Kuasa: Locate the USB connector on the power cable. Plug the USB connector into a compatible 4.5V USB power adapter (not included) or a USB port.
Uji Lampu: Once connected, the lights should illuminate. Use the remote control to test different modes.

jarak dekat view of the SALCAR Christmas Tree String Lights components: USB connector, remote control, star tree topper, and the ring for hanging on the tree.

Image: Key components for setup, including the USB plug, remote, and tree topper ring.

Arahan Operasi

The SALCAR Christmas Tree String Lights are operated using the included remote control. Ensure the remote has a working battery (if applicable, usually pre-installed or a small tab to remove). Point the remote towards the USB receiver for best results.

Fungsi Kawalan Jauh:

HIDUP/MATI: Tekan ke ON butang untuk menghidupkan lampu, dan DIMATIKAN untuk mematikannya.
MOD (1-8): Cycle through 8 different lighting modes:
1. Gabungan
2. Dalam Gelombang
3. Berurutan
4. Cahaya Perlahan
5. Chasing/Denyar
6. Pudar perlahan
7. Kelipan/Denyar
8. Tetap Hidup
MALAM (+/-): Laraskan kecerahan lampu.
PEMASA: Activate the timer function (e.g., 6 hours on, 18 hours off). Refer to the remote's specific markings for exact timer duration.

Close-up of the remote control for the SALCAR Christmas Tree String Lights, showing buttons for ON/OFF, MODE (1-8), DIM, and TIMER.

Image: Remote control for operating the lights.

Penyelenggaraan

Pembersihan: Ensure the lights are unplugged before cleaning. Gently wipe the LEDs and cables with a soft, dry cloth. Do not use liquid cleaners.
Storan: When not in use, carefully coil the light strands to prevent tangling. Store the lights in their original packaging or a dry, cool place away from direct sunlight.
Ketahanan: The pure copper wire is designed for high temperature and pressure resistance, and is flame retardant.

Menyelesaikan masalah

Masalah	Kemungkinan Punca	Penyelesaian
Lampu tidak menyala.	Tiada kuasa, sambungan longgar, bateri alat kawalan jauh mati.	Ensure USB is securely plugged into a working 4.5V power source. Check if the remote control battery needs replacement or if the protective tab is removed. Tekan butang ON pada alat kawalan jauh.
Alat kawalan jauh tidak berfungsi.	Obstruction, dead battery, remote too far.	Pastikan tiada halangan antara alat kawalan jauh dan penerima USB. Gantikan bateri kawalan jauh. Move closer to the lights when using the remote.
Lampu berkelip-kelip atau malap.	Low power, dimming setting.	Ensure the USB power source provides sufficient power (4.5V, 450mA). Use the DIM+ button on the remote to increase brightness.

Waranti dan Sokongan

Information regarding specific warranty terms and availability of spare parts for the SALCAR LU4 Christmas Tree String Lights is not provided in the product details. For any support inquiries, warranty claims, or questions not covered in this manual, please contact your retailer or the SALCAR customer service directly through their official channels.

Please retain your proof of purchase for any warranty-related claims.

SALCAR LU4