1. Pengenalan
The QINIZX 5S Active Battery Equalizer Balancer is an inductive energy transfer board designed to actively balance the voltage of individual cells within a 5-series (5S) lithium-ion (Li-ion), lithium polymer (Lipo), or lithium iron phosphate (LiFePO4/LFP) battery pack. This device helps maintain cell voltage consistency, which is crucial for the longevity and performance of your battery pack. It operates by transferring energy between adjacent cells to equalize their voltage perbezaan.
This equalizer is an auxiliary component and is not a Battery Management System (BMS). It does not provide overvoltage or overdischarge protection. For comprehensive battery protection, it is recommended to use this equalizer in parallel with a suitable BMS protection board.
2. Maklumat dan Amaran Keselamatan
Read all instructions carefully before installation and use. Failure to follow these safety guidelines may result in damage to the product, battery pack, or personal injury.
- This product is designed for 5S battery packs only. Do not use with other cell counts.
- Ensure all battery cells are wired correctly before connecting the equalization board. Incorrect wiring can cause short-circuits and damage the board.
- Always ensure proper insulation for all connections to prevent accidental short-circuits.
- When inserting the cable plug, do so obliquely, ensuring the "B-" pin makes contact first. Improper insertion may cause the board to burn out.
- This equalization board is not a BMS. It does not provide overvoltage, undervoltage, or overcurrent protection. It must be used in conjunction with a BMS for full battery protection.
- Do not use with low-quality or severely imbalanced battery packs, as this may cause the indicator light to flash and report errors.
- The board may become warm during active balancing, especially with significant cell imbalances. This is normal operation.
3. Produk Lebihview
The QINIZX 5S Active Battery Equalizer Balancer features an inductive energy transfer mechanism to achieve cell voltage balance. It is compact and designed for integration into various battery applications.
Rajah 3.1: Atas view of the QINIZX 5S Active Battery Equalizer Balancer board, displaying the inductive coils, integrated circuits, and the 6-pin connector for battery cell connections.
Rajah 3.2: Bawah view of the QINIZX 5S Active Battery Equalizer Balancer board, showing the PCB traces and mounting holes.
Ciri-ciri Utama:
- Pengimbangan Aktif: Menggunakan pemindahan tenaga induktif untuk pengimbangan sel yang cekap.
- Keserasian: Supports NCM (Li-ion), Lipo, and LFP (LiFePO4) battery types. Not compatible with LTO batteries.
- Voltage Julat: sel tunggal voltage working range of 3.0V to 4.2V.
- Baki Semasa: Up to 1.2A maximum balance current, depending on voltage perbezaan.
- Balance Accuracy: Achieves a typical adjacent voltage balance accuracy of 30mV.
- Lampu Penunjuk: LED indicators for balance status and error detection.
- Saiz padat: PCB dimensions approximately 2.08 x 2.04 x 0.31 inches.
4. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Jenis Bateri yang berkenaan | NCM (Li-ion), Lipo, LFP (LiFePO4) |
| Incompatible Battery Type | LTO |
| Number of Series Cells | 5S (5 series) |
| Sel Tunggal Voltage Julat | 3.0V - 4.2V |
| Kapasiti Bateri yang Dicadangkan | Below 30AH |
| Kaedah Imbangan | Inductive Energy Transfer |
| Balance Trigger Voltage Perbezaan | > 0.1V (adjacent cells) |
| Balance Stop Voltage Perbezaan | < 0.03V (adjacent cells) |
| Balance Current (0.1V-0.2V diff) | 0.5A - 0.7A |
| Balance Current (>0.2V diff) | 1.0A (max 1.2A) |
| Voltage Balance Accuracy | 30mV (typical, between adjacent voltages) |
| Di bawah voltage Protection Dormant Voltage | < 0.03V (adjacent cells) |
| Tidur Semasa | 10µA |
| PCB Dimensions (L x W x H) | 2.08 x 2.04 x 0.31 inci (53 x 52 x 8 mm) |
| Aksesori Termasuk | 1x Active Balance PCB, 1x 6-pin XH2.54mm terminal wire (1.3ft / 22AWG) |
Figure 4.1: Dimensional drawing of the equalizer board, indicating its compact size for integration.
5. Persediaan dan Pemasangan
Careful wiring is essential for the correct and safe operation of the equalizer board. Always ensure the battery pack is partially discharged before beginning installation.
Wiring Definition (for 5S battery pack):
- B-: The total negative pole of the battery pack (negative pole of the first battery).
- B1: The positive pole of the first battery.
- B2: The positive pole of the second battery.
- B3: The positive pole of the third battery.
- B4: The positive pole of the fourth battery.
- B5: The positive pole of the fifth battery (and the total positive pole of the 5S pack).
Figure 5.1: Wiring diagram illustrating the correct connection points for the 6-pin cable to a 5S battery pack.
Langkah Pemasangan:
- Sediakan Pek Bateri: Ensure your 5S battery pack is partially discharged.
- Sambungan Wayar: Solder or securely connect each wire from the provided 6-pin XH2.54mm terminal cable to the corresponding battery cell terminals as defined above (B-, B1, B2, B3, B4, B5). Double-check all connections for correctness and polarity.
- Penebat: After wiring, ensure all exposed connections are properly insulated to prevent short-circuits.
- Connect to Board: Carefully insert the wired 6-pin connector into the socket on the equalizer board. Remember to insert it obliquely, ensuring the "B-" pin makes contact first.
- Semakan Awal: After connection, observe the LED indicators on the board. Refer to the "Operation" section for indicator light meanings.
Gambar 5.2: Cthample of the equalizer board connected to a 5S battery pack, showing the wiring harness extending to the cells.
Rajah 5.3: Atas-bawah view of the equalizer board connected to a 5S battery pack, illustrating the overall setup.
6. Operasi
The QINIZX 5S Active Battery Equalizer Balancer operates automatically to maintain cell voltage balance. It continuously monitors the voltage differences between adjacent cells.
Balancing Mechanism:
- The equalization process is triggered when the voltage difference between any two adjacent cells exceeds 0.1V.
- Tenaga dipindahkan dari volum yang lebih tinggitagsel e ke volum yang lebih rendahtagsel e sehingga volumtage difference between them is less than 0.03V, at which point balancing for that pair stops.
- For optimal balancing, especially with new or significantly imbalanced packs, it may be necessary to charge and discharge the battery pack multiple times.
Status Lampu Penunjuk:
- LED Hidup: Indicates that active balancing is currently in progress for the corresponding cell pair.
- LED Mati: Indicates that balancing for the corresponding cell pair has ended, or the voltage difference is below the trigger threshold.
- LED berkelip: Indicates a potential issue such as a battery drop string (disconnected cell) or a circuit failure. Refer to the Troubleshooting section.
7. Penyelesaian masalah
| Masalah | Penunjuk | Kemungkinan Punca | Penyelesaian |
|---|---|---|---|
| Board not balancing / No LEDs on | Semua LED dimatikan |
|
|
| Board not balancing / Some LEDs on | Some LEDs On, some Off |
|
|
| Petunjuk ralat | LED Berkelip |
|
|
| Board gets excessively hot | T/A |
|
|
8. Penyelenggaraan
The QINIZX 5S Active Battery Equalizer Balancer is designed for maintenance-free operation. Ensure the board and its connections remain clean, dry, and free from physical damage. Periodically inspect wiring for wear or loose connections, especially in applications subject to vibration.
9. Waranti dan Sokongan
Specific warranty information for this product is not provided in this manual. For warranty claims, technical support, or further assistance, please contact the seller or manufacturer directly through your purchase platform.
Nota: Damage resulting from incorrect wiring, improper installation, or failure to adhere to safety warnings may void any applicable warranty.