INALSA Homeasy WD10 Wet and Dry Vacuum Cleaner

1. Produk Lebihview

The INALSA Homeasy WD10 is a versatile wet and dry vacuum cleaner designed for various cleaning tasks. It features a powerful 1200W motor, a 10-liter capacity tank, and a blower function for efficient cleaning.

Imej 1.1: Berakhirview of the INALSA Homeasy WD10 vacuum cleaner with key components labeled, including the blower function port, easy carry handle, secure latch system, on/off switch, 10L tank capacity, on-board tool storage, and swivel caster wheels.

2. Arahan Keselamatan

Before operating the appliance, please read all safety instructions carefully to prevent electric shock, fire, or injury.

• Pastikan bekalan kuasa voltage sepadan dengan label penilaian pada perkakas.
• Jangan gunakan pembersih vakum untuk mengutip cecair mudah terbakar atau mudah terbakar, abu panas atau objek tajam.
• Always unplug the appliance from the power outlet before cleaning or performing maintenance.
• Keep hands, feet, loose clothing, and hair away from rotating parts.
• Jangan rendam unit motor dalam air atau cecair lain.
• Perkakas ini adalah untuk kegunaan dalaman sahaja.

3. Pemasangan dan Persediaan

Ikuti langkah-langkah ini untuk memasang pembersih vakum anda sebelum penggunaan pertama.

3.1 Membongkar dan Pengecaman Komponen

Carefully remove all components from the packaging. Verify that all parts listed below are present:

• 1N Container
• 1N Motor Unit
• 1N Hose Pipe with Handle Grip
• 3N Extension Pipes
• 1N Dry & Wet Squeezing Brush
• 1N 2-in-1 Crevice Nozzle
• 1N Small Round Brush
• 2N Cloth Filters (for dry use)
• 1N Sponge Filter (for wet use)
• 1N Carry Handle
• 2N Handle Screws
• 1N Filter Holder Ring
• 4N Castor Wheels
• 1N Instruction Manual cum Warranty Card

Imej 3.1: All included accessories: Wet & Dry Brush, Extension Rods, Crevice Nozzle, Cloth Filter, Sponge Filter, Flexible Hose, and Small Round Brush.

3.2 Attaching Castor Wheels

1. Terbalikkan bekas itu.
2. Insert each of the four castor wheels into the designated slots on the base of the container until they click into place.

3.3 Installing the Carry Handle

1. Align the carry handle with the slots on the motor unit.
2. Secure the handle using the provided handle screws.

3.4 Pemasangan Penapis

The type of filter used depends on whether you are performing wet or dry cleaning.

• For Dry Cleaning: Place one of the cloth filters over the motor unit's filter cage. Secure it with the filter holder ring.
• For Wet Cleaning: Remove any cloth filter. Place the sponge filter over the motor unit's filter cage. Do not use the cloth filter for wet cleaning.

Imej 3.2: Washable cloth filter for dry pickup and sponge filter for wet pickup. The image also illustrates the buoy technology that stops water suction when the tank is full.

3.5 Memasang Hos dan Aksesori

1. Insert the hose pipe into the air suction port on the front of the container until it is firmly seated.
2. Attach the desired extension pipes to the handle grip of the hose.
3. Connect the appropriate cleaning brush or nozzle (e.g., Dry & Wet Squeezing Brush, 2-in-1 Crevice Nozzle, Small Round Brush) to the end of the extension pipes.

Imej 3.3: The vacuum cleaner assembled with its 1.8m flexible hose, 3x 0.30m extension tubes, and 4.0m power cord, providing over 7.0m cleaning range.

4. Arahan Operasi

The INALSA Homeasy WD10 offers wet, dry, and blower functions.

4.1 Penyedutan Kering

1. Ensure the cloth filter is correctly installed.
2. Connect the desired dry cleaning attachment (e.g., Dry & Wet Squeezing Brush for floors, Crevice Nozzle for tight spaces).
3. Palamkan kord kuasa ke salur keluar elektrik yang sesuai.
4. Press the On/Off switch to start the vacuum cleaner.
5. Guide the attachment over the surface to be cleaned.
6. After use, press the On/Off switch to turn off the appliance and unplug it.

4.2 Penyedutan Basah

1. Penting: Remove the cloth filter and install the sponge filter for wet cleaning.
2. Connect the Dry & Wet Squeezing Brush or other suitable wet cleaning attachment.
3. Palamkan kord kuasa ke salur keluar elektrik yang sesuai.
4. Press the On/Off switch to start the vacuum cleaner.
5. Guide the attachment over the wet surface to pick up liquids.
6. The built-in Safe Buoy technology will automatically stop suction when the liquid capacity reaches its maximum point, protecting the motor.
7. After use, press the On/Off switch to turn off the appliance and unplug it. Empty the tank immediately after wet use.

4.3 Fungsi Peniup

1. Penting: Ensure no filter is installed in the vacuum cleaner for effective blowing results.
2. Remove the hose from the air suction port.
3. Insert the hose pipe into the blower port located on the motor unit.
4. Palamkan kord kuasa ke salur keluar elektrik yang sesuai.
5. Press the On/Off switch to activate the blower function.
6. Direct the hose towards the area you wish to blow clean (e.g., dislodge dust, dry surfaces).
7. After use, press the On/Off switch to turn off the appliance and unplug it.

Imej 4.1: Wide applications including carpet cleaning, blowing leaves, dry cleaning, sofa surface cleaning, wet cleaning, and small corner cleaning.

5. Penyelenggaraan dan Pembersihan

Penyelenggaraan tetap memastikan prestasi optimum dan memanjangkan hayat pembersih vakum anda.

5.1 Mengosongkan Tangki

1. Ensure the vacuum cleaner is turned off and unplugged.
2. Release the latches on the sides of the container and lift off the motor unit.
3. Carefully empty the collected dust or liquid from the 10-liter tank.
4. Bersihkan bahagian dalam tangki dengan iklanamp cloth if necessary and allow it to dry completely before reassembling.

5.2 Membersihkan Penapis

Clean filters regularly to maintain suction power.

• Penapis Kain: For dry use, remove the cloth filter and shake off accumulated dust. It can be gently hand-washed with mild soap and water. Ensure it is completely dry before reinstallation.
• Penapis Span: For wet use, remove the sponge filter and rinse it under running water. Squeeze out excess water and allow it to air dry completely before storage or next use.

5.3 Membersihkan Aksesori

Wipe down the hose, extension pipes, and nozzles with a damp cloth. Ensure they are free from blockages.

6. Penyelesaian masalah

Jika anda menghadapi masalah dengan pembersih vakum anda, rujuk kepada masalah dan penyelesaian biasa berikut:

7. Spesifikasi

8. Waranti dan Sokongan

8.1 Maklumat Waranti

This INALSA Homeasy WD10 Wet and Dry Vacuum Cleaner comes with a Waranti pengilang 1 tahun dari tarikh pembelian. Sila simpan resit pembelian anda untuk tuntutan waranti. Waranti melindungi kecacatan pembuatan di bawah keadaan penggunaan biasa.

8.2 Sokongan Pelanggan

For any queries, service requests, or technical assistance, please contact the manufacturer:

• Pengeluar: Tuareg Marketing Pvt Ltd
• Alamat: 154, Bhalswa, Delhi- 110033

Please refer to the warranty card included with your product for detailed terms and conditions and additional contact information.