1. Pengenalan
Thank you for choosing the 5 CORE RACK STAND 9U DJ Mixer Stand. This instruction manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new equipment. Please read this manual thoroughly before use and retain it for future reference.
This 2-layer DJ stand is designed to securely hold audio mixers on its top platform and accommodate larger equipment such as amplifiers, equalizers, and microphones on its bottom rack. Its robust metal construction and adjustable features ensure a reliable and flexible setup for DJs, live performances, and studio recordings.
2. Maklumat Keselamatan
- Kapasiti Berat: Do not exceed the maximum weight capacity of 220.5 lbs (100 kg) for the entire stand. The top rack supports up to 110 lbs (50 kg), and the bottom rack supports up to 220 lbs (100 kg). Overloading can cause instability and damage.
- Perhimpunan: Ensure all components are correctly assembled and tightened before placing any equipment on the stand. Refer to the assembly instructions carefully.
- Kestabilan: Always engage the locks on all four wheels when the stand is in a stationary position to prevent accidental movement.
- penempatan: Place the stand on a flat, stable, and level surface. Avoid uneven ground or sloped areas.
- Kanak-kanak dan Haiwan Kesayangan: Keep children and pets away from the stand, especially during assembly and when it is loaded with equipment.
- Penyelenggaraan: Regularly inspect the stand for any loose parts, damage, or wear. Do not use if damaged.
3. Kandungan Pakej
Sila sahkan bahawa semua bahagian yang disenaraikan di bawah disertakan dalam pakej anda. Jika mana-mana bahagian hilang atau rosak, sila hubungi khidmat pelanggan.
- Top Rack Frame (1)
- Bottom Rack Frame (1)
- Vertical Support Bars (2)
- Adjustable Angle Brackets (2)
- Lockable Wheels (4)
- Hardware Kit (screws, nuts, washers, spin knobs)
- Assembly Tools (e.g., Allen wrench, spanner)
4. Arahan Perhimpunan
Assembly of the 5 CORE RACK STAND 9U is straightforward and can be completed in minutes. It is recommended to assemble the stand on a soft, clean surface to prevent scratches.
- Attach Wheels to Bottom Rack: Secure the four lockable wheels to the designated corners of the bottom rack frame using the provided screws and tools. Ensure the locking mechanism is facing outwards for easy access.
- Connect Vertical Support Bars: Attach the two vertical support bars to the bottom rack frame. Ensure the rack mounting holes on the vertical bars are aligned correctly.
- Install Adjustable Angle Brackets: Mount the adjustable angle brackets to the upper section of the vertical support bars. These brackets will hold the top rack.
- Attach Top Rack Frame: Secure the top rack frame to the adjustable angle brackets. Use the spin knobs to initially set a comfortable angle.
- Ketatkan Semua Pengikat: Once all components are in place, systematically tighten all screws and fasteners. Do not overtighten, but ensure all connections are firm and secure.
Rajah 4.1: Assembly diagram illustrating how to connect the various parts of the rack stand.
Rajah 4.2: Detail of the easy installation and knob control mechanism.
5. Ciri-ciri Utama
- 2-Layer Design: The stand features a top frame for mixers and a bottom rack for larger equipment, providing comprehensive storage.
- Angle Adjustable Top Rack: Easily adjust the top rack's angle up to 45 degrees using the spin knobs for optimal access and viewing.
- Pembinaan Logam Teguh: Made from heavy-duty metal with anti-rust paint, ensuring durability and stability for professional use.
- Kapasiti Berat Tinggi: Supports up to 220.5 lbs (100 kg) total, with the top rack handling 110 lbs (50 kg) and the bottom rack 220 lbs (100 kg).
- Roda Bergolek Boleh Dikunci: Equipped with four lockable wheels for easy mobility and secure positioning during use.
- Aliran Udara Dipertingkatkan: The open frame design and raised bottom promote better air circulation, preventing equipment overheating.
Rajah 5.1: Double layer storage design for mixers and other equipment.
Rajah 5.2: Adjustable angle for optimal access to your gear.
Rajah 5.3: Lockable wheels for secure placement.
6. Arahan Operasi
6.1. Placing Equipment
- Carefully place your DJ mixer or similar equipment on the top rack. Ensure it is centered and stable.
- Utilize the bottom rack for amplifiers, equalizers, or other larger audio components. Distribute weight evenly to maintain stability.
6.2. Adjusting Top Rack Angle
- Loosen the spin knobs located on the adjustable angle brackets on both sides of the top rack.
- Adjust the top rack to your desired angle (up to 45 degrees).
- Once the desired angle is achieved, firmly tighten both spin knobs to secure the top rack in place.
6.3. Moving and Securing the Stand
- To move the stand, unlock all four wheels by disengaging their locking mechanisms.
- Carefully push or pull the stand to its new location. Avoid sudden movements or excessive force, especially when loaded.
- Once in the desired position, engage the locking mechanisms on all four wheels to prevent any unintended movement during use.
Rajah 6.1: Example of the rack stand in use with DJ equipment.
7. Penyelenggaraan
- Pembersihan: Lap dirian dengan lembut, damp kain untuk menghilangkan habuk dan kotoran. Elakkan pembersih atau pelarut yang kasar yang boleh merosakkan kemasan.
- Pemeriksaan: Periksa semua bolt, skru dan sambungan secara berkala untuk memastikan ia ketat. Ketatkan semula jika perlu.
- Penjagaan Roda: Keep the wheels free of debris to ensure smooth rolling. Lubricate the wheel axles if they become stiff.
- Storan: If storing the stand for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight or extreme temperatures.
8. Penyelesaian masalah
8.1. Stand is Wobbly
- Periksa Pengikat: Pastikan semua bolt dan skru diketatkan dengan kukuh.
- Permukaan Aras: Verify that the stand is placed on a flat and level surface. Adjust if necessary.
- Pengagihan Berat: Ensure equipment weight is evenly distributed across both racks.
8.2. Wheels Not Rolling Smoothly
- Semak serpihan: Inspect wheels for any hair, dust, or other debris that might be obstructing movement. Clean as needed.
- Pelinciran: Apply a small amount of lubricant to the wheel axles if they are stiff.
8.3. Difficulty Adjusting Top Rack Angle
- Loosen Knobs: Ensure the spin knobs on both sides of the adjustable angle brackets are sufficiently loosened before attempting to change the angle.
- Halangan yang jelas: Check for any cables or equipment that might be preventing smooth adjustment.
9. Spesifikasi
| Atribut | Perincian |
|---|---|
| Nombor Model | RACK STAND 9U |
| bahan | Logam Tugas Berat |
| Jenis Selesai | Painted (Anti-rust) |
| warna | Hitam |
| Number of Rack Units (Top) | 9U |
| Number of Rack Units (Bottom) | 9U |
| Top Rack Capacity | 110 paun (50 kg) |
| Bottom Rack Capacity | 220 paun (100 kg) |
| Jumlah Kapasiti Berat | 220.5 paun (100 kg) |
| Sudut Boleh Laras | Sehingga 45 darjah |
| mobiliti | 4 Roda Boleh Dikunci |
| Dimensi (Keseluruhan) | Rujuk Rajah 9.1 |
Rajah 9.1: Dimension details of the rack stand.
10. Video Produk
10.1. 5 Core 9U Professional Audio Rack Mount DJ Mixer Stand
Video ini memberikan penamatview of the 5 Core 9U Professional Audio Rack Mount DJ Mixer Stand, showcasing its features and functionality for various audio setups.
10.2. 9U Professional Audio Rack Mount DJ Mixer Studio Stand Cart
Watch this video for a detailed look at the 9U Professional Audio Rack Mount DJ Mixer Studio Stand Cart, demonstrating its robust design and ease of use in a studio environment.
11. Waranti & Sokongan
For warranty information, product support, or to purchase replacement parts, please visit the official 5 CORE website or contact Kaneer Ent. directly through your purchase platform.
Sokongan dalam talian: Lawati Kedai 5 CORE di Amazon