REDARC SPFP1200

REDARC 200W Monocrystalline Portable Folding Solar Panel SPFP1200 User Manual

1. Pengenalan

This manual provides essential information for the safe and efficient use of your REDARC 200W Monocrystalline Portable Folding Solar Panel (Model: SPFP1200). Please read these instructions carefully before setup and operation to ensure optimal performance and longevity of your solar panel. This product is designed to convert sunlight into electrical energy for charging 12V battery systems.

2. Maklumat Keselamatan

Observe the following safety precautions to prevent injury and damage to the product:

  • Do not attempt to disassemble, modify, or repair the solar panel. Unauthorized modifications can be dangerous and will void the warranty.
  • Handle the solar panel with care. Avoid dropping or subjecting it to strong impacts.
  • Ensure all electrical connections are secure and correctly polarized before connecting to a battery or charge controller. Incorrect wiring can cause damage.
  • Do not touch exposed wires or terminals when the panel is exposed to sunlight, as it will generate electricity.
  • Keep the solar panel away from open flames, flammable gases, and liquids.
  • Always use an appropriate solar charge controller between the solar panel and the battery to prevent overcharging and reverse current flow.
  • Jauhkan kanak-kanak dan haiwan peliharaan dari panel solar semasa operasi.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

  • REDARC 200W Monocrystalline Portable Folding Solar Panel
  • Integrated adjustable support legs
  • Connection cables (typically with Anderson-style plugs or similar)
  • Manual Pengguna (dokumen ini)

4. Persediaan

Follow these steps to set up your portable folding solar panel:

  1. Buka Panel: Carefully unfold the solar panel sections on a flat, stable surface.
  2. Letakkan Kaki: Extend and lock the integrated adjustable support legs to prop up the panel. Ensure the legs are stable and can support the panel's weight.
  3. Angle Towards the Sun: Adjust the angle of the panel using the support legs to face directly towards the sun for maximum efficiency. The optimal angle will vary depending on your location and the time of day.
  4. Connect to Charge Controller: Connect the solar panel's output cable to the input terminals of a compatible solar charge controller. Ensure correct polarity (positive to positive, negative to negative).
  5. Sambung ke Bateri: Connect the output terminals of the solar charge controller to your 12V battery system. Always connect the charge controller to the battery sebelum ini connecting it to the solar panel.

Image: REDARC 200W Monocrystalline Portable Folding Solar Panel in deployed state.

REDARC 200W Monocrystalline Portable Folding Solar Panel deployed with adjustable legs

This image shows the REDARC 200W Monocrystalline Portable Folding Solar Panel unfolded and set up with its adjustable legs, ready for sun exposure. The panel's dark, reflective surface indicates its monocrystalline cells, and the sturdy frame is visible.

5. Beroperasi

Once set up, the solar panel will begin generating power when exposed to sunlight. The charge controller will regulate the power flow to your battery.

  • Pengecasan Monitor: Observe the indicators on your solar charge controller to confirm that the battery is charging correctly.
  • Adjust for Sun: For best results, periodically adjust the panel's angle throughout the day to follow the sun's path.
  • Faktor Persekitaran: Cloud cover, shade, and dust on the panel will reduce power output.

Tiada video produk rasmi daripada penjual ditemui untuk disematkan dalam manual ini.

6. Penyelenggaraan

Regular maintenance ensures optimal performance and extends the lifespan of your solar panel:

  • Pembersihan: Clean the surface of the solar panel regularly with a soft, damp kain untuk menghilangkan habuk, kotoran dan serpihan. Elakkan pembersih yang kasar atau bahan kimia yang keras.
  • Periksa Sambungan: Periodically check all electrical connections for corrosion, looseness, or damage. Ensure they are clean and secure.
  • Storan: When not in use, fold the solar panel and store it in a dry, cool place, away from direct sunlight and extreme temperatures. Use the provided carrying case if available.
  • Pemeriksaan Fizikal: Inspect the panel for any physical damage, such as cracks in the glass or frame, before and after each use.

7. Penyelesaian masalah

If you encounter issues with your solar panel, refer to the table below for common problems and solutions:

MasalahKemungkinan PuncaPenyelesaian
No power output from panelNo sunlight, panel in shade, dirty panel surface, faulty connection.Move panel to direct sunlight, remove any shading, clean panel surface, check all connections.
Keluaran kuasa rendahPartial shading, incorrect panel angle, cloudy weather, dirty panel, undersized charge controller.Ensure full sun exposure, adjust panel angle, clean panel, verify charge controller is rated for 200W.
Bateri tidak dicasCharge controller fault, incorrect wiring, battery fault, insufficient solar input.Check charge controller status, verify wiring polarity, test battery, ensure adequate sunlight.
Panel appears damagedPhysical impact, improper handling.Discontinue use. Contact REDARC support for assistance. Do not attempt repairs.

8. Spesifikasi

Key technical specifications for the REDARC 200W Monocrystalline Portable Folding Solar Panel SPFP1200:

SpesifikasiNilai
JenamaREDARC
Nombor ModelSPFP1200
Kuasa Maksimum200 Watt
bahanMonocrystalline
KecekapanKecekapan Tinggi
Berat Barang24.2 paun (10.98 kg)
Dimensi Produk (Dilipat)Kira-kira 34.6 x 30.9 x 3.7 inci (87.9 x 78.5 x 9.4 cm)
GayaBoleh laras, mudah alih
PengeluarREDARC Electronics

9. Waranti dan Sokongan

REDARC products are manufactured to high standards and come with a manufacturer's warranty. Specific warranty terms and conditions, including duration and coverage, are typically provided with your purchase documentation or can be found on the official REDARC webtapak. Sila simpan bukti pembelian anda untuk tuntutan waranti.

For technical support, warranty inquiries, or service, please contact REDARC customer service directly. Refer to the REDARC webtapak untuk maklumat hubungan terkini dan sumber sokongan.

Dokumen Berkaitan - SPFP1200

Praview Memasang Lekap ABS REDARC untuk Panel Suria Monocrystalline Tetap
Panduan tentang cara memasang pelekap ABS REDARC untuk panel solar monohablur tetap pada RV dan bot tanpa penggerudian, memastikan integriti pengedap. Meliputi model SMI9001, SMI9002, SMI9003 dan SMI9007.
Praview REDARC 12V hingga 24V Litar Tunggal Voltage Penggalak: Manual Pengguna VI180D, VI360D, VI720D
Dokumen ini menyediakan spesifikasi terperinci, ciri, panduan pemasangan dan maklumat waranti untuk Vol Litar Tunggal 12V hingga 24V Siri VI REDARCtage Penggalak, termasuk model VI180D, VI360D dan VI720D.
Praview Panel Suria Monocrystalline REDARC: Model SMSP1050-SMSP1200 - Panduan Pemasangan & Keselamatan
Panduan komprehensif untuk Panel Suria Monocrystalline REDARC (SMSP1050, SMSP1080, SMSP1120, SMSP1180, SMSP1200), meliputi maklumat spesifikasi, keselamatan, pemasangan, pendawaian dan waranti untuk aplikasi RV dan karavan.
Praview Panel Suria Monocrystalline REDARC: Panduan Pemasangan, Spesifikasi dan Keselamatan
Panduan komprehensif untuk Panel Suria Monocrystalline REDARC (SMSP1050-SMSP1200), meliputi ciri, spesifikasi terperinci, arahan pemasangan, gambar rajah pendawaian, langkah berjaga-jaga keselamatan dan maklumat waranti.
Praview Kit Pemasangan GPC untuk REDARC ALPHA R 50A - Panduan Pemasangan INEOS GRENADIER
Panduan pemasangan terperinci untuk kit pelekap GPC untuk sistem dwi bateri REDARC ALPHA R 50A, khusus untuk kenderaan INEOS GRENADIER. Termasuk arahan langkah demi langkah, amaran keselamatan dan butiran pentauliahan.
Praview REDARC BCDC ALPHA 100R: Pengecas Bateri 12V 100A DC-DC dengan Panduan Pemasangan Bluetooth
Terokai REDARC BCDC ALPHA 100R, pengecas bateri 12V 100A DC-DC yang menampilkan pemantauan bateri pintar dan sambungan Bluetooth. Panduan ini menyediakan butiran pemasangan, konfigurasi dan operasi untuk pengurusan kuasa kenderaan yang optimum.