VPFET HDMI Extender User Manual

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your VPFET HDMI Extender. This device allows you to extend 1080p HDMI signals up to 200 feet (60 meters) over a single Cat5e/6/7 Ethernet cable. It supports Power over Cable (POC) technology, requiring power only at the Transmitter (TX) unit.

2. Maklumat Keselamatan

• Ensure all cables are connected securely before powering on the device.
• Use only the provided 5V DC power adapter.
• Jangan dedahkan peranti kepada kelembapan atau suhu yang melampau.
• Avoid disassembling the unit; refer servicing to qualified personnel.
• Use high-quality oxygen-free copper Cat5e/6/7 cables for optimal performance and transmission distance.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej anda:

• 1 x Unit Pemancar HDMI (TX)
• 1 x Unit Penerima HDMI (RX)
• Bekalan Kuasa DC 1 x 5V
• 1 x Manual Pengguna

Image: Contents of the VPFET HDMI Extender package, showing the transmitter, receiver, power adapter, and user manual.

4. Produk Lebihview dan Komponen

Familiarize yourself with the ports and indicators on both the Transmitter (TX) and Receiver (RX) units.

Imej: Terperinci view of the Transmitter (TX) and Receiver (RX) units, highlighting HDMI Input/Output, 5V Power Output, EDID Copy button, and RJ45 ports.

Unit Pemancar (TX):

• Input HDMI: Connects to the HDMI source device (e.g., PC, DVD player, game console).
• Input Kuasa 5V: Connects to the included 5V DC power adapter.
• EDID Copy Button: Used to copy EDID information from the display.
• RJ45 Output (OUT): Connects to the Receiver (RX) unit via Cat5e/6/7 cable.

Unit Penerima (RX):

• Output HDMI: Connects to the HDMI display device (e.g., TV, monitor).
• RJ45 Input (IN): Connects to the Transmitter (TX) unit via Cat5e/6/7 cable.
• Note: The RX unit receives power via the Cat cable (POC) from the TX unit.

5. Arahan Persediaan

Follow these steps to set up your HDMI Extender:

1. Connect HDMI Source to TX: Connect your HDMI source device (e.g., PC, DVD player, game console) to the HDMI DALAM port of the Transmitter (TX) unit using a high-quality HDMI cable.
2. Connect Display to RX: Connect your HDMI display device (e.g., TV, monitor) to the HDMI KELUAR port of the Receiver (RX) unit using a high-quality HDMI cable.
3. Connect TX and RX with Ethernet Cable: Sambungkan RJ45 KELUAR port of the TX unit to the RJ45 IN port of the RX unit using a single Cat5e, Cat6, or Cat7 Ethernet cable. Ensure the cable is oxygen-free copper for optimal performance.
4. Power On TX Unit: Sambungkan penyesuai kuasa 5V DC yang disertakan kepada Input Kuasa 5V port on the Transmitter (TX) unit. The RX unit will receive power via the Ethernet cable (POC).
5. Sahkan Sambungan: Once all connections are made and the TX unit is powered, check for signal on your display.

Image: Connection diagram illustrating how to connect the HDMI source (laptop, PC, DVD, TV Box) to the Transmitter (TX), the TX to the Receiver (RX) via a Cat5e/6/7 cable, and the RX to the display.

EDID Copy Function:

The EDID (Extended Display Identification Data) copy function ensures the best video and audio signals are transmitted by allowing the TX unit to learn the display's capabilities. It is recommended to perform this step if you experience display issues.

1. Connect the Transmitter (TX) unit directly to your monitor/display using an HDMI cable (without the RX unit or Cat cable).
2. Connect the 5V power adapter to the TX unit.
3. Tekan dan tahan butang butang EDID on the TX unit for approximately 3 seconds.
4. The signal indicator light will flash 3 times, indicating that the EDID information has been successfully copied and stored.
5. You can now proceed with the full setup as described above. The copied EDID will be remembered until the TX unit is reset or a new EDID copy operation is performed.

To restore factory EDID settings, connect the TX unit to power, then press and hold the EDID button for 3 seconds. The signal indicator will light up and then turn off, confirming the reset.

Image: Close-up of the Transmitter (TX) unit, highlighting the EDID button and its function in copying display information.

6. Arahan Operasi

Once the setup is complete, the VPFET HDMI Extender operates automatically. Ensure your source device is powered on and outputting an HDMI signal, and your display is set to the correct HDMI input.

• Kabel Kuasa Atas (POC): The TX unit powers the RX unit through the Ethernet cable, simplifying installation by eliminating the need for a power outlet at the display end.
• Automatic Equalization: The built-in automatic equalization algorithm adjusts for cable transmission distance, ensuring stable signal transmission without manual configuration.
• Resolusi yang Disokong: The extender supports resolutions up to 1920x1200@60Hz and 1080p@60Hz.
• Format Audio yang Disokong: DTS-HD, Dolby-trueHD, DTS, Dolby-AC3, DSD.

Image: Illustration of the unilateral power supply (POC) feature, indicating that only the transmitting (TX) end requires a power connection, while the receiving (RX) end does not.

Image: An illustration of the HDMI Extender in operation, showing a laptop connected to the TX unit, which is then connected via a long Ethernet cable to the RX unit, and finally to a large display, demonstrating extended transmission distance.

7. Spesifikasi

Image: Dimensions of the VPFET HDMI Extender Transmitter (TX) unit, showing its compact size.

8. Penyelesaian masalah

Jika anda menghadapi masalah, rujuk kepada masalah dan penyelesaian biasa berikut:

• Tiada Gambar/Isyarat:
  • Pastikan semua kabel HDMI dan Ethernet disambungkan dengan selamat.
  • Verify the TX unit is powered on with the included 5V adapter.
  • Check if the display is set to the correct HDMI input.
  • Try performing the EDID Copy procedure (Section 5).
  • Test with shorter, certified HDMI and Ethernet cables.
  • Ensure the Ethernet cable is Cat5e/6/7 (oxygen-free copper recommended) and not damaged.
• Isyarat Berkelip/Sekejap-sekejap:
  • Check cable lengths; ensure they are within the specified limits (200ft for Cat cable, 16ft for HDMI).
  • Ensure the Ethernet cable is not running parallel to power lines or other sources of interference.
  • Cuba kabel Ethernet yang berbeza.
  • Perform the EDID Copy procedure.
• Tiada Audio:
  • Verify audio settings on your source device and display.
  • Ensure the HDMI cables support audio transmission.
  • Perform the EDID Copy procedure.

9. Penyelenggaraan

The VPFET HDMI Extender requires minimal maintenance. Follow these guidelines to ensure longevity:

• Simpan peranti di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung dan sumber haba.
• Bersihkan bahagian luar dengan kain lembut dan kering. Jangan gunakan pembersih cecair atau aerosol.
• Pastikan pengudaraan yang betul di sekeliling unit untuk mengelakkan terlalu panas.

10. Waranti dan Sokongan

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official VPFET website. Please have your model number (B099ZCTV74) and purchase date ready when contacting support.