Nerf Elite 2.0 Volt SD-1 Blaster Instruction Manual

pengenalan

The Nerf Elite 2.0 Volt SD-1 Blaster is designed for fun, active play, featuring a light beam for enhanced targeting. This manual provides essential information for safe and effective use, including setup, operation, maintenance, and safety guidelines.

Maklumat Keselamatan

WARNING: TO AVOID EYE INJURY.

Jangan sasarkan ke mata atau muka. Penggunaan cermin mata disyorkan untuk pemain dan orang dalam julat. Gunakan hanya dart Nerf rasmi. Dart lain mungkin tidak memenuhi piawaian keselamatan. Jangan ubah suai dart atau blaster.

WARNING: CHOKING HAZARD - Small parts may be generated. Not for children under 3 years.

Disyorkan untuk berumur 8 tahun ke atas.

Apa yang ada dalam Kotak

• Nerf Elite 2.0 Volt SD-1 Blaster
• 6 Official Nerf Elite Darts
• Manual Arahan (dokumen ini)

Image: The Nerf Elite 2.0 Volt SD-1 Blaster shown alongside the included 6 Nerf Elite Darts.

Persediaan

1. Pemasangan Bateri

The light beam feature requires 2x 1.5V AAA alkaline batteries (not included).

1. Locate the battery compartment on the blaster.
2. Menggunakan pemutar skru Phillips (tidak disertakan), buka skru penutup petak bateri.
3. Masukkan 2 bateri AAA, pastikan kekutuban (+/-) betul seperti yang ditunjukkan di dalam petak.
4. Gantikan penutup dan kencangkannya dengan skru.

2. Memuatkan Dart

The Volt SD-1 blaster is a single-shot blaster. It includes storage for additional darts.

1. Insert one official Nerf Elite dart into the front barrel of the blaster.
2. Additional darts can be stored in the integrated dart storage slots on the blaster.

Imej: Dari dekat view of the blaster, highlighting the front-loading barrel and the dart storage slots.

Arahan Operasi

1. Priming the Blaster

To prepare the blaster for firing, pull the priming handle located at the back of the blaster all the way back until it clicks into place. Then, push it forward to return it to its original position.

2. Firing Darts

Once primed, aim the blaster at your target and pull the trigger to fire the dart.

3. Using the Light Beam Targeting

The Volt SD-1 features a light beam to assist with targeting, especially in low-light conditions. The beam works on targets up to 15 feet (4.5 meters) away.

• Press the button located near the front of the blaster to activate the light beam.
• Align the light beam with your target for improved accuracy.
• Press the button again to turn off the light beam.

Image: The blaster with its light beam activated, demonstrating the targeting feature.

Penyelenggaraan

• Keep the blaster clean by wiping it with a dry cloth.
• Avoid exposing the blaster to extreme temperatures or moisture.
• Store darts in a clean, dry place to maintain their integrity.
• Remove batteries if the blaster will not be used for an extended period to prevent leakage.

Menyelesaikan masalah

Spesifikasi

• Nombor Model: E9952F03
• Dimensi Produk: 0.39 x 0.39 x 0.39 inci
• Berat Barang: 12 auns
• Umur Disyorkan Pengilang: 8 - 8 tahun
• Bateri Diperlukan: 2x 1.5V AAA alkaline batteries (not included)
• Dart Type: Official Nerf Elite Darts
• Light Beam Range: Sehingga 15 kaki (4.5 meter)
• Pengeluar: Hasbro

Waranti dan Sokongan

Untuk maklumat mengenai jaminan produk atau sokongan pelanggan, sila rujuk kepada pegawai pengilang weblaman web atau hubungi khidmat pelanggan mereka secara langsung. Butiran jaminan khusus mungkin berbeza mengikut wilayah dan peruncit.

Pengilang: Hasbro

Lawati Nerf Store untuk lebih banyak produk dan maklumat.