VIVOTEK ND9323P H.265 8-Channel Embedded PoE NVR User Manual

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of the VIVOTEK ND9323P H.265 8-Channel Embedded PoE Network Video Recorder (NVR). Please read this manual thoroughly before using the product to ensure proper and safe operation. Keep this manual for future reference.

2. Maklumat Keselamatan

Observe the following safety precautions to prevent damage to the NVR and to ensure user safety:

• Bekalan Kuasa: Use only the power adapter supplied with the NVR. Ensure the power source matches the NVR's voltage keperluan.
• Pengudaraan: Do not block any ventilation openings. Install the NVR in a well-ventilated area to prevent overheating.
• Persekitaran: Avoid exposing the NVR to water, moisture, extreme temperatures, or direct sunlight. Do not place heavy objects on the NVR.
• Servis: Jangan cuba servis produk ini sendiri. Rujuk semua perkhidmatan kepada pegawai perkhidmatan yang berkelayakan.
• Pengendalian: Handle the NVR with care. Avoid dropping or subjecting it to strong impacts.

3. Kandungan Pakej

Carefully unpack the box and ensure all items are present and in good condition. If any items are missing or damaged, contact your vendor immediately.

• VIVOTEK ND9323P NVR Unit
• Penyesuai Kuasa
• Tetikus USB
• Panduan Pemasangan Pantas
• Accessory Pack (Screws for HDD installation, Ethernet cable)
• Case (referring to the NVR enclosure itself)

Figure 3.1: VIVOTEK ND9323P NVR unit. This image shows the front panel of the NVR, typically featuring status indicators and USB ports.

4. Produk Lebihview

The VIVOTEK ND9323P is an 8-channel embedded Network Video Recorder designed for IP surveillance systems. It supports H.265 video compression for efficient storage and bandwidth usage. With its integrated Power over Ethernet (PoE) ports, it simplifies camera installation by providing both power and data connectivity through a single Ethernet cable.

4.1 Ciri-ciri Utama

• 8-Channel Video Input
• H.265/H.264 Video Compression
• 8 x 802.3at/af PoE Ports
• Local Display Output (HDMI/VGA)
• Remote Access via VIVOTEK VIVOCloud App or VMS
• Supports up to 16TB HDD storage (HDD not included)

4.2 Panel Depan dan Belakang

Refer to the Quick Installation Guide for detailed diagrams of the front and rear panels, indicating ports and indicators.

• Panel Depan: Power LED, HDD LED, Network LED, USB ports.
• Panel belakang: Power input, LAN port, PoE ports (1-8), HDMI output, VGA output, Audio I/O, USB ports.

5. Persediaan

5.1 Pemasangan Pemacu Keras (Pilihan)

The NVR does not typically include a pre-installed hard drive. Follow these steps to install a 3.5-inch SATA hard drive:

1. Buka skru dan tanggalkan penutup atas NVR.
2. Sambungkan kabel data dan kuasa SATA dari NVR ke cakera keras.
3. Pasangkan cakera keras pada casis NVR menggunakan skru yang disediakan.
4. Pasang semula penutup atas dan pasangkannya dengan skru.

Nota: Ensure the NVR is powered off and unplugged before installing or removing a hard drive.

5.2 Sambungan Fizikal

1. Sambungkan Kamera: Connect your IP cameras to the NVR's PoE ports (1-8) using Ethernet cables. The NVR will provide power and network connectivity to the cameras.
2. Sambungkan ke Rangkaian: Connect the NVR's LAN port to your local network router or switch using an Ethernet cable.
3. Paparan Sambungkan: Sambungkan monitor ke port output HDMI atau VGA NVR.
4. Sambung Tetikus: Palamkan tetikus USB ke salah satu port USB NVR.
5. Hidupkan kuasa: Sambungkan penyesuai kuasa ke input kuasa NVR dan kemudian pasangkannya ke soket kuasa. NVR akan dihidupkan secara automatik.

5.3 Tatarajah Awal

Upon first boot, the NVR will guide you through a setup wizard on the connected monitor:

1. Pemilihan Bahasa: Pilih bahasa pilihan anda.
2. Persediaan Kata Laluan: Create a strong password for the administrator account. This is crucial for security.
3. Tetapan Rangkaian: Configure network settings (DHCP or Static IP). DHCP is recommended for most home users.
4. Masa dan Tarikh: Tetapkan zon waktu, tarikh dan masa yang betul.
5. Permulaan Pemacu Keras: If you installed a new hard drive, the NVR will prompt you to format it. Confirm to proceed. Amaran: Formatting will erase all data on the drive.
6. Camera Search and Add: The NVR will automatically search for connected VIVOTEK cameras. Select and add them to the NVR.
7. Selesai: Complete the wizard to access the NVR's live view.

6. Mengendalikan NVR

6.1 Accessing the NVR

You can access and manage the NVR through various methods:

• Paparan Tempatan: Directly via the connected monitor and USB mouse.
• Web pelayar: Enter the NVR's IP address into a web pelayar pada komputer yang disambungkan ke rangkaian yang sama.
• VIVOTEK VIVOCloud App: Download the mobile app for remote viewing dan pengurusan.
• VIVOTEK VAST 2 VMS: For advanced management and multi-NVR systems.

6.2 Langsung View

Hidup view displays real-time video feeds from all connected cameras. You can switch between single-camera view, grid berbilang kamera view, and customize the display layout.

6.3 Tetapan Rakaman

Configure recording schedules and modes for each camera:

• Rakaman Berterusan: Rekod 24/7.
• Rakaman Pengesanan Gerak: Merakam hanya apabila gerakan dikesan.
• Rakaman Berjadual: Records during specific time periods.
• Rakaman Acara: Records based on external triggers or alarms.

Access these settings through the NVR's main menu: Configuration > Recording > Schedule.

6.4 Main semula

Untuk kembaliview dirakam footage:

1. Daripada menu utama, pilih Main balik.
2. Choose the camera(s) and the date/time range you wish to review.
3. Use the timeline and playback controls (play, pause, fast forward, rewind) to navigate through the footage.

6.5 Event Management and Notifications

Configure the NVR to respond to events such as motion detection, camera tampering, or network disconnection. The NVR can send email notifications, trigger alarms, or start recording.

Access these settings via: Configuration > Event.

7. Penyelenggaraan

7.1 Kemas Kini Perisian Tegar

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Firmware can be updated via the NVR's web interface or local display menu: Configuration > System > Firmware Upgrade.

Awas: Do not power off the NVR during a firmware upgrade. This can cause permanent damage.

7.2 Pengurusan Cakera Keras

Monitor the health of your hard drive(s) and ensure sufficient storage space. The NVR will automatically overwrite the oldest recordings when the disk is full, based on your settings.

Access HDD status and settings via: Configuration > Storage > HDD Management.

7.3 Pembersihan

Keep the NVR unit clean and free from dust. Use a soft, dry cloth for cleaning. Do not use liquid cleaners or aerosols.

8. Penyelesaian masalah

This section addresses common issues you might encounter with your VIVOTEK ND9323P NVR.

8.1 Tiada Paparan Video pada Monitor

• Semak Kabel: Pastikan kabel HDMI/VGA disambungkan dengan selamat pada NVR dan monitor.
• Input Monitor: Verify the monitor is set to the correct input source (HDMI/VGA).
• Kuasa NVR: Confirm the NVR is powered on and its power LED is illuminated.

8.2 Cameras Not Showing Up / No Image

• Sambungan PoE: Ensure cameras are properly connected to the NVR's PoE ports. Check if the PoE port LEDs on the NVR are active.
• Kuasa Kamera: If not using PoE, ensure cameras are receiving power from their own power adapters.
• Kesambungan Rangkaian: Verify the NVR and cameras are on the same network segment if not directly connected via PoE.
• Status Kamera: Check the camera's own status indicators.
• NVR Camera Management: Pergi ke Configuration > Camera > Camera Management to ensure cameras are added and enabled. Try rescanning for cameras.

8.3 Cannot Access NVR via Web pelayar

• Alamat IP: Confirm the NVR's IP address is correct and that your computer is on the same network.
• Kabel Rangkaian: Ensure the NVR's LAN port is connected to your network.
• Firewall: Temporarily disable your computer's firewall to check if it's blocking access.
• Keserasian Penyemak Imbas: Use a recommended web penyemak imbas (cth, Chrome, Firefox).

8.4 Kata Laluan Terlupa

If you forget the administrator password, you may need to perform a factory reset. Refer to the VIVOTEK support website or contact technical support for the specific procedure for your model, as this often involves a physical reset button or a specific utility.

9. Spesifikasi

The following table lists the key specifications for the VIVOTEK ND9323P NVR:

10. Waranti dan Sokongan

VIVOTEK products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official VIVOTEK webtapak.

For technical support, product registration, or to download the latest firmware and software, please visit the VIVOTEK support portal:

VIVOTEK Official Support Webtapak

When contacting support, please have your NVR's model number (ND9323P) and serial number ready.