ANENG ST180 4000 Count Digital Clamp Manual Pengguna Multimeter

pengenalan

The ANENG ST180 is a compact, high-precision digital clamp multimeter designed for a wide range of electrical measurements. It features an auto-ranging function and can measure AC/DC voltage, AC current, resistance, capacitance, frequency, and perform diode and NCV (Non-Contact Voltage) tests. This manual provides essential information for safe and effective use of your device.

Maklumat Keselamatan

Always observe basic safety precautions when using this device to avoid electric shock, injury, or damage to the meter or equipment under test. Read all instructions carefully before use.

• Jangan melebihi nilai input maksimum yang ditentukan untuk setiap julat ukuran.
• Jangan gunakan meter jika ia kelihatan rosak atau jika penebat pada wayar ujian terjejas.
• Berhati-hati apabila bekerja dengan voltagadalah melebihi 60V DC atau 30V AC RMS, kerana ini menimbulkan bahaya kejutan.
• Ensure the meter is in the correct function and range before making measurements.
• Gantikan bateri apabila penunjuk bateri rendah muncul untuk memastikan bacaan yang tepat.

Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• 1 x ANENG ST180 Digital Clamp Multimeter
• 1 x Sepasang Petunjuk Ujian (Merah dan Hitam)
• 1 x Manual Pengguna (Bahasa Inggeris)

Image: The ANENG ST180 Clamp Multimeter package contents, including the meter, red and black test leads, and protective caps.

Produk Selesaiview

The ANENG ST180 is a versatile tool for electrical diagnostics. It features a compact design, an easy-to-read backlit display, and various measurement capabilities.

Image: Detailed diagram of the ANENG ST180 Clamp Multimeter, highlighting its components such as the jaw, function dial, LCD backlight, test lead sockets, and buttons.

Ciri-ciri Utama:

• Multi-function Clamp meter: Measures AC current, AC/DC voltage, resistance, capacitance, frequency, diode, and NCV.
• Ketepatan Tinggi: Auto-ranging capability for accurate measurements without breaking the circuit.
• Paparan Cahaya Belakang Terang: Clear 4000-count display with switchable backlight for visibility in various lighting conditions.
• Pegangan Data: Membekukan bacaan yang dipaparkan untuk memudahkan rakaman.
• Reliable and Efficient: Features an LED buzzer alarm for continuity and NCV detection.
• Reka bentuk padat: Small size for easy portability and handling.

Image: The ANENG ST180 Clamp Multimeter showcasing its high precision and ability to measure AC current, AC/DC voltage, resistance, capacitance, diode, non-contact induction, on-off buzzer, Hz, and live detection.

Persediaan

Pemasangan Bateri:

The ANENG ST180 requires two AAA 1.5V batteries (not included). To install or replace batteries:

1. Cari penutup petak bateri di belakang meter.
2. Gunakan pemutar skru untuk membuka petak bateri.
3. Insert two AAA 1.5V batteries, observing the correct polarity (+ and -).
4. Gantikan penutup petak bateri dan kencangkannya dengan skru.

Menghubungkan Petunjuk Ujian:

Untuk voltage, resistance, capacitance, frequency, and diode measurements, connect the test leads:

• Masukkan petunjuk ujian hitam ke dalam bicu input "COM" (Umum).
• Masukkan petunjuk ujian merah ke dalam bicu input "VΩHz".

Arahan Operasi

Hidupkan/Mati Kuasa:

Rotate the function dial from the "OFF" position to any desired measurement function to power on the meter. To power off, rotate the dial back to the "OFF" position.

Pemilihan Fungsi:

The rotary dial allows you to select different measurement functions. For functions with multiple modes (e.g., AC/DC voltage), press the SEL/V butang untuk kitaran melalui mod.

AC Current Measurement (Clamp Jaw):

Untuk mengukur arus AC:

1. Rotate the function dial to the A~ kedudukan.
2. Tekan picu terbuka rahang untuk membuka clamp Rahang.
3. Enclose a single conductor (not a power cord with multiple wires) within the clamp Rahang.
4. Baca nilai semasa AC pada paparan.

VoltagPengukuran (AC/DC):

Untuk mengukur vol AC atau DCtage:

1. Rotate the function dial to the V~ (Jilid ACtage) atau V- (DC Voltage) position. If combined, press SEL/V untuk bertukar.
2. Sambungkan petunjuk ujian merah ke sisi positif (+) litar dan petunjuk ujian hitam ke sisi negatif (-).
3. Baca voltagnilai e pada paparan.

Pengukuran Rintangan:

Untuk mengukur rintangan:

1. Rotate the function dial to the Ω kedudukan.
2. Ensure the circuit is de-energized before connecting the test leads across the component.
3. Baca nilai rintangan pada paparan.

Pengukuran Kapasitan:

Untuk mengukur kapasiti:

1. Rotate the function dial to the Kapasitansi position (often shared with resistance, press SEL/V).
2. Discharge the capacitor before connecting the test leads.
3. Sambungkan petunjuk ujian merentasi kapasitor.
4. Baca nilai kapasitans pada paparan.

Pengukuran Kekerapan:

Untuk mengukur kekerapan:

1. Rotate the function dial to the Hz position (often shared, press SEL/V).
2. Sambungkan wayar ujian merentasi sumber isyarat.
3. Baca nilai kekerapan pada paparan.

Ujian Diod:

Untuk menjalankan ujian diod:

1. Rotate the function dial to the Diod position (often shared, press SEL/V).
2. Sambungkan plumbum ujian merah ke anod dan plumbum ujian hitam ke katod diod.
3. Paparan akan menunjukkan vol ke hadapantage drop. Balikkan petunjuk untuk memeriksa litar terbuka.

NCV (Voltage) Pengesanan:

Fungsi NCV mengesan vol ACtage tanpa sentuhan fizikal.

1. Rotate the function dial to the NCV kedudukan.
2. Bring the top of the meter near the conductor or outlet.
3. The meter will beep and the LED will flash, with the frequency increasing as it gets closer to the AC voltage sumber.

Image: The ANENG ST180 Clamp Multimeter demonstrating its NCV (Non-Contact Voltage) detection feature, showing the meter detecting voltage near an electrical outlet with an alarm buzzer sound.

Pegangan Data:

Tekan ke H/BL button (single press) to hold the current reading on the display. Press it again to release the hold.

Lampu Latar dan Lampu Suluh:

• Lampu latar: Tekan lama H/BL butang untuk menghidupkan atau mematikan lampu latar paparan.
• Lampu suluh: Tekan lama SEL/V button to activate the built-in flashlight. Long press again to turn it off.

Penyelenggaraan

Pembersihan:

Lap meter dengan kain kering dan lembut. Jangan gunakan bahan pelelas atau pelarut.

Penggantian Bateri:

When the low battery indicator appears on the display, replace the batteries as described in the "Setup" section to ensure accurate measurements and proper operation.

Storan:

If the meter is not used for an extended period, remove the batteries to prevent leakage and damage. Store the device in a cool, dry place away from direct sunlight.

Menyelesaikan masalah

Jika anda menghadapi masalah dengan ANENG ST180 anda, rujuk masalah dan penyelesaian biasa berikut:

• Tiada Paparan/Meter Tidak Dihidupkan: Periksa pemasangan bateri dan pastikan bateri tidak habis. Gantikan jika perlu.
• Bacaan Tidak Tepat: Ensure test leads are properly connected. Verify the correct function and range are selected. Replace batteries if the low battery indicator is on.
• Tiada Pengesanan NCV: Ensure the NCV function is selected. The sensor needs to be close to an AC voltage sumber.
• Continuity Buzzer Not Working: Ensure the continuity function is selected. Check if the circuit is de-energized.

Jika masalah berterusan, hubungi sokongan pelanggan untuk bantuan lanjut.

Spesifikasi

The following table details the technical specifications of the ANENG ST180 Digital Clamp Multimeter:

Image: The ANENG ST180 Clamp Multimeter with its physical dimensions labeled in millimeters and inches.

Waranti dan Sokongan

This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or service inquiries, please refer to the contact information provided with your purchase documentation or visit the official ANENG webtapak.

Sila simpan bukti pembelian anda untuk tujuan waranti.