Mahli Robotic 3-in-1 Vacuum Cleaner

pengenalan

Thank you for choosing the Mahli Robotic 3-in-1 Vacuum Cleaner. This intelligent omni-directional robotic vacuum is designed to simplify your home cleaning routine, effectively cleaning hardwood and tile floors. Please read this manual thoroughly before operating the device to ensure safe and optimal performance.

Arahan Keselamatan Penting

Apabila menggunakan perkakas elektrik, langkah berjaga-jaga asas hendaklah sentiasa dipatuhi, termasuk yang berikut:

• Baca semua arahan sebelum menggunakan perkakas ini.
• Jangan kendalikan pembersih vakum di kawasan yang mempunyai cecair, gas atau habuk mudah terbakar atau mudah terbakar.
• Jauhkan rambut, pakaian longgar, jari dan semua bahagian badan daripada bukaan dan bahagian yang bergerak.
• Jangan ambil apa-apa yang terbakar atau berasap, seperti rokok, mancis, atau abu panas.
• Jangan gunakan tanpa tong habuk dan/atau penapis di tempatnya.
• Gunakan hanya seperti yang diterangkan dalam manual ini. Gunakan hanya lampiran yang disyorkan pengilang.
• Jangan biarkan digunakan sebagai mainan. Perhatian yang rapi diperlukan apabila digunakan oleh atau berhampiran kanak-kanak.
• Cabut plag dari soket apabila tidak digunakan dan sebelum diservis.
• Sekiranya perkakas tidak berfungsi sebagaimana mestinya, telah dijatuhkan, rosak, ditinggalkan di luar rumah, atau jatuh ke air, kembalikan ke pusat servis.

Kandungan Pakej

Sila semak kandungan pakej semasa dibuka untuk memastikan semua item ada:

• Mahli Robotic 3-in-1 Vacuum Cleaner (MBOT3002BK)
• Kabel Pengecasan
• Side Brushes (pre-installed or separate)
• Manual Pengguna (dokumen ini)

Image: The Mahli Robotic 3-in-1 Vacuum Cleaner, showcasing its sleek, circular design and top panel.

Komponen Produk

Familiarize yourself with the different parts of your robotic vacuum:

Imej: Atas view of the Mahli Robotic Vacuum, highlighting the power button and the access panel for the dustbin.

• 1. Butang Kuasa: Tekan untuk memulakan/menghentikan pembersihan.
• 2. Dustbin Cover: Lift to access the dustbin.
• 3. Lampu Penunjuk: Shows charging status and operational mode.

Imej: Bawah view of the Mahli Robotic Vacuum, showing the two side brushes, driving wheels, and the removable filter compartment.

• 4. Side Brushes: Sweep debris into the vacuum's path.
• 5. Driving Wheels: Allow the vacuum to move across surfaces.
• 6. Charging Contacts: For connecting to the charging cable.
• 7. Dustbin Release: Button or latch to remove the dustbin.
• 8. Penapis: Captures fine dust and particles.

Persediaan

1. Bongkar: Tanggalkan pembersih vakum dan semua aksesori daripada pembungkusan dengan berhati-hati.
2. Mengecas Bateri: Before first use, fully charge the vacuum cleaner. Connect the charging cable to the vacuum's charging port and plug the adapter into a wall outlet. The indicator light will show charging status (e.g., red for charging, blue for fully charged). A full charge takes approximately 2 hours.
3. Pasang Berus Sisi: If not pre-installed, gently push the side brushes onto their respective posts on the bottom of the vacuum until they click into place.
4. Sediakan Kawasan Pembersihan: Remove any large obstacles, loose cables, or small items from the floor that could entangle the vacuum or obstruct its path.

Arahan Operasi

1. Memulakan Kitaran Pembersihan:

   Ensure the vacuum is fully charged and placed on the floor in the area you wish to clean. Press the power button on the top of the vacuum. The indicator light will turn blue, and the vacuum will begin its cleaning cycle.
2. Stopping a Cleaning Cycle:

   To pause or stop the vacuum during operation, press the power button again. The vacuum will stop, and the indicator light may change color or turn off.

3. Pembersihan Automatik:

   The Mahli Robotic Vacuum uses intelligent omni-directional technology to navigate and clean your floors. It will automatically adjust its path to cover the cleaning area and avoid obstacles. It is designed for hard floors such as hardwood and tile.

Penyelenggaraan

Regular maintenance is crucial for optimal performance and longevity of your robotic vacuum. Always turn off the vacuum and unplug it before performing any maintenance.

1. Mengosongkan Tong Sampah:

   It is recommended to empty the dustbin after each cleaning cycle or when the dustbin full indicator (if available) illuminates. Lift the dustbin cover, remove the dustbin, and empty its contents into a trash can. Rinse the dustbin with water if necessary, but ensure it is completely dry before reinserting.

2. Membersihkan Penapis:

   The filter should be cleaned regularly, ideally after every 1-3 uses depending on usage. Tap the filter gently to remove dust. For a deeper clean, the filter can be rinsed under running water. Allow the filter to air dry completely for at least 24 hours before reinserting it into the dustbin.
3. Membersihkan Berus Sisi:

   Check the side brushes periodically for tangled hair or debris. Gently pull them off their posts to clean. If brushes are worn or damaged, replace them with new ones.

4. Cleaning Wheels:

   Inspect the driving wheels for any hair or debris that might impede movement. Clean as needed.

5. Penderia Pembersihan:

   Wipe the sensors (located on the bottom and front of the vacuum) with a clean, dry cloth to ensure proper navigation.

Menyelesaikan masalah

If you encounter issues with your Mahli Robotic Vacuum, please refer to the following common problems and solutions:

Spesifikasi

Waranti dan Sokongan

Mahli products are manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your product or visit the official Mahli webtapak. Simpan resit pembelian anda sebagai bukti pembelian.

For further assistance, please contact Mahli Customer Service.