mDesign Adjustable Reclining Folding Floor Chair Instruction Manual

pengenalan

Thank you for choosing the mDesign Adjustable Reclining Folding Floor Chair. This manual provides important instructions for the safe and effective use of your new floor chair. Please read this manual thoroughly before use and retain it for future reference.

Maklumat Keselamatan

Sila patuhi garis panduan keselamatan berikut untuk mengelakkan kecederaan atau kerosakan pada produk:

• AMARAN: Jangan melebihi kapasiti berat maksimum 225 lbs (102 kg).
• Be cautious when reclining the chair to prevent falling or injury. Ensure the chair is stable before applying full weight.
• This product is intended for indoor use only. Do not expose to outdoor elements.
• Jauhkan daripada api terbuka dan sumber haba terus.
• Ensure all components are properly assembled and functioning before each use.

Persediaan

The mDesign Adjustable Reclining Folding Floor Chair requires minimal setup. It arrives pre-assembled and ready for use.

1. Tanggalkan kerusi dari pembungkusannya dengan berhati-hati.
2. Unfold the chair to its flat position on a stable, level surface.
3. Proceed to the Operating Instructions section to adjust the chair to your desired position.

Image: The mDesign Adjustable Reclining Folding Floor Chair shown with its dimensions: 23.6 inches (59.9 cm) high, 21.5 inches (54.6 cm) wide, and 19.5 inches (49.5 cm) deep.

Arahan Operasi

Your floor chair features 3 adjustable reclining positions for personalized comfort.

1. To adjust the backrest, gently push the backrest forward until you hear a click.
2. Continue pushing forward to release the locking mechanism.
3. Slowly recline the backrest to your desired angle. You will hear distinct clicks as it locks into each of the 3 available positions.
4. To return the chair to a flat position, push the backrest fully forward until it clicks into the most upright position, then gently lay it back down.

Image: A sequence showing the mDesign Adjustable Reclining Folding Floor Chair transitioning through its various reclining positions, from flat to upright.

Penyelenggaraan

Proper care will extend the life of your floor chair.

• Pembersihan: Pembersihan tempat sahaja. Gunakan detergen lembut danamp cloth to gently clean soiled areas. Do not saturate the fabric.
• Allow the chair to air dry completely before use.
• Do not use harsh chemicals or abrasive cleaners, as these may damage the fabric.
• Regularly inspect the chair for any signs of wear or damage.

Image: A hand gently pressing on the gray fabric of the mDesign floor chair, illustrating the cushioned surface.

Menyelesaikan masalah

If you encounter any issues with your floor chair, please refer to the following common solutions:

• Kerusi tidak boleh direbahkan dengan lancar: Ensure no obstructions are present in the reclining mechanism. Try adjusting the backrest fully forward to reset the mechanism, then recline again.
• Kerusi berasa tidak stabil: Verify that the chair is placed on a flat, stable surface. Ensure the backrest is securely locked into one of the reclining positions.
• Unusual noises during adjustment: A slight clicking sound is normal during adjustment as the mechanism locks into place. If you hear grinding or other unusual noises, discontinue use and contact customer support.

Spesifikasi

Waranti dan Sokongan

For warranty information or product support, please refer to the retailer's return policy or contact mDesign customer service directly. Contact details can typically be found on the mDesign official webtapak atau melalui dokumentasi pembelian anda.