LVYUAN DC200PLUS

LVYUAN Automatic Pulse Battery Charger DC200PLUS Instruction Manual

Model: DC200PLUS

1. Pengenalan

Terima kasih kerana membeliasing the LVYUAN Automatic Pulse Battery Charger DC200PLUS. This charger is designed for 12V and 24V lead-acid batteries, including open-type, sealed-type, and AGM/GEL batteries. It features automatic charging, pulse charging, trickle charging, and battery diagnosis functions, ensuring efficient and safe battery maintenance. Please read this manual thoroughly before use to ensure proper operation and safety.

2. Maklumat Keselamatan

  • Do not use for lithium batteries. This charger is specifically designed for lead-acid batteries.
  • Pastikan pengudaraan yang betul semasa mengecas.
  • Avoid sparks or flames near the battery during charging.
  • Wear eye protection and gloves when handling batteries.
  • Jauhkan daripada kanak-kanak.
  • The charger is equipped with multiple protection functions including short circuit protection, reverse connection protection, overheat protection, undervoltage perlindungan, overvoltage protection, overcharge protection, and leakage prevention.
  • If the charging clips are connected in reverse, an error will be displayed.
  • Before using the repair mode, always remove the battery from the vehicle to prevent current flow to the vehicle's wiring.

3. Produk Lebihview

The LVYUAN DC200PLUS is an intelligent battery charger that automatically detects battery type and condition, then selects the optimal charging method. It features a clear digital LCD display for monitoring charging status, current, voltage, dan peratusan bateritage. A built-in cooling fan helps regulate temperature during operation.

Digital display and controls of the LVYUAN DC200PLUS charger

The digital display provides real-time information on charging status, current, voltage, and battery type.

LVYUAN DC200PLUS charger with cooling fan and safety icons

The charger includes a cooling fan for temperature regulation and various safety features.

4. Persediaan

  1. Connect Battery Clips: Connect the red charging clip to the positive (+) terminal of the battery and the black charging clip to the negative (-) terminal. Ensure a secure connection.
  2. Plug into AC Outlet: Insert the charger's power plug into a standard AC100V electrical outlet.
  3. Hidupkan Kuasa: Locate the power switch on the back of the charger and turn it to the 'ON' position. The display will light up, indicating the charger is ready.
Diagram showing simple charging connection method for LVYUAN DC200PLUS

Follow these steps for a simple and safe charging connection.

Official product video demonstrating the LVYUAN DC200PLUS Automatic Pulse Battery Charger in use, showing connection, mode selection, and charging process.

5. Arahan Operasi

5.1 Pengecasan Automatik

The charger automatically detects the battery's voltage (12V or 24V) and condition. It then selects the most appropriate charging current and method.

LVYUAN DC200PLUS charger showing automatic optimal charging method selection

The charger automatically selects the optimal charging method for your battery.

5.2 Pemilihan Semasa

For 12V batteries, you can select charging currents of 5A, 10A, or 20A. For 24V batteries, you can select 5A or 10A. Press the 'Current Selection' button to cycle through the available options. Once charging begins, the current cannot be changed. If an incorrect current is selected, turn off the power and restart the selection process.

LVYUAN DC200PLUS charger showing three-stage current selection options

Select from 5A, 10A, or 20A charging currents depending on your battery's capacity.

5.3 Start/Stop Charging

Press the 'Start/Stop' button to begin or pause the charging process. The charger will automatically stop when the battery reaches a full charge state. If the battery voltage drops below a certain threshold due to self-discharge, the charger will automatically resume charging.

5.4 Repair Mode (Pulse Charging)

The repair mode is designed to revitalize degraded lead-acid batteries by removing sulfation. This mode is only effective for 12V lead-acid batteries; it cannot repair 24V batteries.

  • Pengaktifan: Long-press the 'Repair Mode' button for 5 seconds to activate.
  • Penting: Before activating repair mode, always disconnect the battery from the vehicle. Failure to do so may result in current flowing through the vehicle's wiring, preventing effective repair.
  • Repair mode runs for 24 hours. If the battery is not repaired after 24 hours, restart the charger and repeat the repair mode.
  • Monitor battery temperature during repair mode. If the temperature becomes too high, pause the repair process.
LVYUAN DC200PLUS charger showing repair mode for lead-acid batteries

The repair mode can help restore degraded lead-acid batteries.

6. Penyelenggaraan

  • Pastikan pengecas bersih dan kering.
  • Regularly check the charging clips and cables for any damage.
  • Simpan pengecas di tempat yang sejuk dan kering apabila tidak digunakan.

7. Penyelesaian masalah

MasalahKemungkinan PuncaPenyelesaian
Pengecas tidak dihidupkanNo power from AC outlet, power switch offCheck AC outlet, ensure power switch is ON
Error displayed (e.g., reverse connection)Sambungan bateri yang salahDisconnect clips and reconnect correctly (red to +, black to -)
Bateri tidak dicasBattery is faulty or too degraded (0V battery)If battery is 0V, try repair mode after disconnecting from vehicle. If still not charging, battery may be beyond repair.
Repair mode ineffectiveBattery too degraded, or not disconnected from vehicleEnsure battery is removed from vehicle. Repeat repair mode if necessary. Battery may be beyond repair.
Pengecas terlalu panasPoor ventilation, prolonged use in high temperaturesEnsure adequate ventilation. Pause charging if necessary.

8. Spesifikasi

CiriSpesifikasi
JenamaLVYUAN
ModelDC200PLUS
Input VoltageAC100V
Arus Keluaran20A (max during charging)
Bateri yang serasiDC12V/DC24V Lead-Acid (Open, Sealed, AGM, GEL)
Compatible Battery Capacity20Ah ~ 200Ah
12V Output Voltage / SemasaDC12V/20A (max current), 14.4V (STANDARD)/14.8V (AGM)
24V Output Voltage / Semasa24V/10A (max current), 28.8V (STANDARD)/29.6V (AGM)
Charging Current Selection12V: 5A, 10A, 20A; 24V: 5A, 10A
Fungsi PengecasanAutomatic, Pulse, Trickle (Maintenance), Battery Diagnosis
Fungsi PerlindunganReverse connection, Faulty battery, Voltage confirmation, Overcurrent, High temperature, Time over, Short circuit, Undervoltage, Overvoltage, Overcharge, Leakage prevention
Dimensi (D x W x H)12 x 16 x 5 cm
Berat badan1.6 kg
UPC782905972315

9. Waranti dan Sokongan

Produk ini disertakan dengan a 6 Month Warranty Against Manufacturer Defects. For support or warranty claims, please contact your retailer or the manufacturer directly with your purchase details.