Thule 988000

Thule Bike Protector Instruction Manual

Model: 988000

Produk Selesaiview

The Thule Bike Protector is an accessory designed to provide additional protection for bicycles when they are transported or stored in close proximity, such as on a bike rack. It prevents direct contact between bike frames and components, minimizing the risk of dents and scratches.

Ciri-ciri Utama:

  • Kesesuaian Serbaguna: Designed to accommodate various bike frame geometries.
  • Pelarasan Mudah: Features an adjustable design with no loose parts, simplifying installation and removal.
  • Contact Prevention: Utilizes a rubber spacer to create separation between potential contact points.
  • Secure Fixation: Includes a sturdy strap to secure bikes together, further preventing movement and contact.
  • Penggunaan pelbagai guna: Suitable for transportation, parking, and storage scenarios.

Arahan Persediaan

Follow these steps to properly install the Thule Bike Protector to ensure maximum protection for your bicycles.

  1. Identify Contact Points: Before placing bikes on a rack or in storage, identify areas where bike frames, handlebars, pedals, or other components might come into contact with each other.
  2. Position the Protector: Place the rubber spacer component of the Thule Bike Protector between the identified contact points. Ensure the spacer is firmly seated to create a buffer.
  3. Selamatkan dengan Tali: Wrap the integrated sturdy strap around the bike frames or components that need to be held together. Pull the strap taut and secure it to prevent movement. The strap should be tight enough to hold the bikes firmly but not so tight as to damage components.
  4. Sahkan Peletakan: Once installed, gently shake the bikes to confirm that the protector is effectively separating them and that the strap is holding them securely. Adjust as necessary.
Two Thule Bike Protectors, showing the rubber spacer and integrated strap.

Image: Two Thule Bike Protectors, illustrating the design with a rubber spacer and securing strap.

Thule Bike Protector installed between two bikes on a car rack, preventing frame contact.

Imej: Jarak dekat view of the Thule Bike Protector in use, separating two bicycles on a car-mounted rack.

Thule Bike Protector in use on a car rack, showing bikes secured and separated.

Image: Wider view of bikes secured with the Thule Bike Protector on a car rack, demonstrating effective separation.

Arahan Operasi

The Thule Bike Protector is designed for continuous use during bike transportation, parking, and storage to prevent damage.

  • During Transport: Ensure the protector is securely fastened before starting any journey. Periodically check its position and tightness during long trips.
  • Parking and Storage: Use the protector when bikes are parked closely together or stored in a garage or shed to prevent accidental contact and damage.
  • Pembuangan: To remove, unfasten the strap and carefully detach the rubber spacer from between the bikes.

Penyelenggaraan

Proper maintenance ensures the longevity and effectiveness of your Thule Bike Protector.

  • Pembersihan: Clean the protector with mild soap and water. Rinse thoroughly and allow it to air dry completely before storage. Avoid harsh chemicals or abrasive cleaners.
  • Pemeriksaan: Regularly inspect the rubber spacer for any signs of wear, tears, or damage. Check the strap for fraying or loss of elasticity. Replace the protector if significant wear is observed to maintain optimal protection.
  • Storan: Store the protector in a cool, dry place away from direct sunlight when not in use.

Menyelesaikan masalah

If you encounter issues with your Thule Bike Protector, refer to the following common solutions.

MasalahKemungkinan PuncaPenyelesaian
Bikes still touching despite protector.Incorrect placement of the protector or insufficient strap tightness.Reposition the rubber spacer to the exact contact point. Ensure the strap is pulled taut and securely fastened to minimize bike movement. Consider using additional protectors if multiple contact points exist.
Protector slips out of position.Strap is not tight enough or protector is not properly seated.Tighten the strap firmly. Ensure the rubber spacer is wedged securely between the bike components. The design allows for a snug fit on various frame shapes.
Strap appears worn or damaged.Normal wear and tear or excessive force during tightening.Discontinue use if the strap is compromised. Contact Thule customer support for replacement options or consider purchasing a new unit to ensure reliable protection.

Spesifikasi Produk

Nama ModelBike Protector
Nombor Bahagian988000
JenamaThule
bahanplastik
Dimensi Item (LxWxH)3.9 x 7 x 15 inci
Berat Barang4.59 auns
Dimensi Pakej (LxWxH)7.17 x 6.5 x 3.35 inci
Berat Pakej0.29 Kilogram
Bilangan Item1
Pengguna yang DicadangkanUniseks-dewasa
Tahun Model2021

Maklumat Waranti

The Thule Bike Protector is covered by a Waranti Seumur Hidup Terhad. This warranty covers defects in materials and workmanship. For specific terms, conditions, and to make a warranty claim, please refer to the official Thule website or contact Thule customer support directly.

Sokongan Pelanggan

For further assistance, questions, or to report any issues not covered in this manual, please contact Thule customer support:

  • Webtapak: Lawati Thule rasmi webtapak untuk Soalan Lazim, pendaftaran produk dan maklumat hubungan.
  • Borang Perhubungan: Utilize the online contact form available on the Thule support page.
  • telefon: Rujuk kepada Thule webtapak untuk nombor telefon perkhidmatan pelanggan serantau.

When contacting support, please have your product model (988000) and purchase details available.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.