PEMP BMW X3 E83 Android 10.25-inch Touch Screen Monitor User Manual

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your PEMP Android 10.25-inch Touch Screen Monitor, model AL-6283D. This device is designed to enhance the in-car entertainment and navigation experience for BMW X3 E83 models manufactured between 2004 and 2010.

The monitor features an Android 10 operating system, a Qualcomm 8-core processor, 4GB RAM, and 64GB ROM, supporting both wireless CarPlay and wired Android Auto. It integrates with your vehicle's existing systems, including the ability to display the original car interface and utilize the iDrive knob for control.

1.1. Keserasian

• Model Kenderaan: BMW X3 E83 (2004-2010)
• Original Car Configuration: Compatible with vehicles both with and without an existing screen.

Figure 1.1: Illustration of compatible BMW X3 E83 dashboard configurations.

2. Ciri-ciri Produk

• paparan: 10.25-inch HD IPS capacitive touch screen with 1280 x 480 resolution.
• Pemproses: Qualcomm Snapdragon 625 (MSM8953) 8-core processor, up to 2.0GHz.
• Ingatan: 4GB RAM and 64GB ROM (eMCP: LPDDR3 + eMMC5.1).
• Ketersambungan: Built-in Wi-Fi (2.4G & 5G), Bluetooth, and 4G (SIM card slot).
• Penyepaduan Telefon Pintar: Built-in wireless CarPlay and wired Android Auto.
• Integrasi OEM: Supports display of the original car interface and control via the iDrive knob (if installed).

Gambar 2.1: Lebihview of the monitor's core specifications and features.

Figure 2.2: Close-up of the 10.25-inch HD IPS display.

3. Apa yang ada di dalam Kotak

Sila sahkan bahawa semua komponen yang disenaraikan di bawah disertakan dalam pakej anda:

• 1 x Android Display Unit
• 1 x Pendawaian ISO
• 1 x Kabel RCA
• 1 x Speaker (Optional)
• 1 x Antena 4G
• 1 x Antena GPS
• 1 x Kabel USB
• 1 x Kabel Audio
• 1 x Manual Pengguna
• Manual Pemasangan 1 x

Rajah 3.1: Kandungan pakej.

4. Panduan Pemasangan

4.1. Maklumat Keselamatan Penting

Please ensure that the product is installed only when the car is powered off!

4.2. Semakan Pra-Pemasangan

Before proceeding with installation, confirm that your OEM car radio has an AUX menu. If your vehicle does not have an AUX menu, the audio from the Android system will not function. Do not purchase or install if an AUX menu is absent.

Figure 4.1: Verifying AUX menu availability.

4.3. Pemasangan Langkah demi Langkah

For a visual guide, please refer to the official installation video below. Always ensure the vehicle's power is off before beginning any installation steps.

1. Remove Air Conditioning Decorative Panel: Carefully pry and remove the air conditioning decorative panel. Disconnect any plugs on the back and set the panel aside.
2. Remove Central Storage Box: Remove the fixing screw of the central storage box and then remove it.
3. Remove Original Car Host: Remove the fixing screws of the original car host. Pull the host outwards, take it out, pinch the buckle of the harness, pull it back, and then take out the power harness.
4. Kabel Laluan: Pass the 4G antenna, GPS antenna, and USB cable through the passenger seat storage box to the back of the Android device.
5. Connect iDrive Box (if applicable): Connect the wire of the iDrive box and install it.
6. Connect Android Harness: Connect the Android harness, 4G antenna harness, GPS antenna harness, and USB harness to the back of the Android device. Connect the original LVDS cable to the Android device.
7. Install Android Device: Install the Android device to the original car and fix it.
8. Reinstall Original Host: Install the original host back to its position. Lock and fix the original host.
9. Restore Panels: Restore the connection plugs on the back of the air conditioner panel and put the air conditioner panel back in place.

4.4. Troubleshooting Installation Issues

If you encounter a "NO SIGNAL" message after installing the Android device, follow these steps:

• Touch the car info menu.
• Pergi ke Tetapan Kilang > Sistem > kenderaan.
• Pilih Car without OEM Monitor. (Factory password can be found in the manual).

Figure 4.2: Resolving 'No Signal' display issue.

If the iDrive knob is not working, ensure you have selected the correct setting in Factory Settings: Tetapan Kilang > Sistem > kenderaan > Car Without OEM Monitor. This setting is crucial if your car did not originally have an OEM screen.

Figure 4.3: iDrive knob connection and settings.

5. Arahan Operasi

5.1. Operasi Asas

The PEMP Android monitor features a capacitive touch screen for intuitive control. You can also use the original iDrive knob (if installed) to navigate the Android interface.

5.2. Fungsi Skrin Pisah

The device supports split-screen functionality, allowing you to run two applications simultaneously.

• To activate split screen: In a music app, click the multi-function icon in the dropdown menu. Slide up/down to select an app, then drag it to the gray area on the left. Select another app from the right to complete the split screen.
• To exit split screen: Click in the middle of the screen and drag to the left to return to full-screen mode for the music app.

5.3. Quick Launch Bar Customization

The main interface features a quick launch bar on the left with five small icons. You can customize three of these icons to quickly access your favorite applications.

• To add an app: Long-press a small icon on the quick launch bar. A page with available apps will pop up. Select the desired app (e.g., Google browser, ZLINK for CarPlay, Google Maps).
• Note: The top two icons on the quick launch bar are fixed and cannot be replaced.

5.4. Default Music/Video App Setting

You can set your preferred music and video applications as the default playback apps.

• Pergi ke tetapan > Sistem.
• Tatal ke bawah untuk mencari Pilih Apl Muzik dan Select Video App.
• Choose your desired app (e.g., Spotify for music, YouTube for video).

5.5. CarPlay and Android Auto Usage

The monitor supports wireless CarPlay and wired Android Auto for seamless smartphone integration.

Figure 5.1: Wireless CarPlay and Wired Android Auto functionality.

5.6. Calling with OEM Bluetooth and CarPlay

When both OEM Bluetooth and CarPlay are connected, there might be an issue with call audio. If you cannot hear the other person's voice during a call, you need to manually select the sound source from your mobile phone to OEM Bluetooth.

• If you disconnect the OEM Bluetooth, you do not need to set the sound source on the mobile phone when making a call.
• If you select Android Bluetooth, you cannot hear the normal call.

6. Penyelenggaraan dan Penjagaan

6.1. Pembersihan Am

Gunakan kain lembut dan kering untuk membersihkan skrin dan bahagian luar peranti. Elakkan menggunakan bahan kimia yang keras atau bahan yang melelas.

6.2. Kemas Kini Perisian

PEMP continuously works to improve its products. If you wish to upgrade the system, please contact PEMP support via email. They will provide the upgraded software as soon as possible.

7. Penyelesaian masalah

This section addresses common issues you might encounter with your PEMP Android monitor.

• Tiada Audio: Ensure your vehicle has an AUX port and it is correctly selected as the audio input. If your E83 does not have an AUX port, audio from the Android system will not work.
• iDrive Knob Unresponsive/Sticky: This can be a hardware issue. Ensure proper installation and connection. If the issue persists, contact support.
• DVR Function Not Working: Some users have reported issues with the DVR function. Ensure cameras are connected to the correct input (e.g., 'TV in' instead of 'Aux in') and check app settings.
• App Permissions Resetting: Some apps (e.g., Spotify, Amazon Music) may require re-setting background permissions after the car is turned off. This is a software-related issue.
• Distortion Noises through Car Speakers: If you hear distortion when the BMW radio is off, but not when playing music, it might be related to the auxiliary cord connection. Ensure the auxiliary adapter is functioning correctly.

8. Spesifikasi

9. Waranti dan Sokongan

9.1. Maklumat Waranti

This product comes with a one-year warranty covering non-artificial damage.

9.2. Sokongan Pelanggan

For any questions, suggestions, or software upgrade requests, please contact PEMP customer support via email. Your feedback is valued, and the support team will respond as soon as possible to ensure your satisfaction and improve the product.