Carlon B114R-UPC Number-1G Old Work Box Installation and User Manual

1. Produk Lebihview

The Carlon B114R-UPC Number-1G Old Work Box is a non-metallic electrical box designed for installing switches or receptacles in existing walls. Its unique design allows for secure mounting without requiring direct attachment to a wall stud, making it ideal for renovation and retrofit projects. This box is suitable for residential and light commercial applications where a single-gang electrical device is needed.

Imej 1.1: Two Carlon B114R-UPC Number-1G Old Work Boxes. These blue non-metallic boxes feature integrated swing-out tabs for securing them in existing wall openings.

2. Maklumat Keselamatan

AMARAN: Risk of electric shock. Improper installation can lead to serious injury or death. Always follow these safety guidelines:

• Matikan kuasa at the circuit breaker or fuse box before beginning any electrical work. Verify power is off using a voltage penguji.
• Jika anda tidak pasti tentang mana-mana bahagian proses pemasangan, sila rujuk juruelektrik yang berkelayakan.
• Pastikan semua sambungan pendawaian selamat dan mematuhi kod elektrik tempatan.
• Jangan membebankan litar.
• Use only approved electrical components and tools.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Carlon B114R-UPC Number-1G Old Work Box(es)

Note: The quantity of boxes may vary depending on the specific product package purchased.

4. Persediaan dan Pemasangan

Alat yang Diperlukan:

• Pensel
• Drywall saw or utility knife
• Pemutar skru (kepala Phillips)
• Penjalur/pemotong wayar
• Voltage penguji

Langkah Pemasangan:

1. Matikan Kuasa: Locate the appropriate circuit breaker or fuse and turn off the power to the area where you will be working. Use a voltage penguji untuk mengesahkan bahawa kuasa dimatikan.
2. Mark the Opening: Place the Carlon Old Work Box against the wall at the desired installation location. Use a pencil to trace the outline of the box onto the wall surface. Ensure the orientation is correct for your device.
3. Potong Pembukaan: Carefully cut along the traced line using a drywall saw or utility knife. Ensure the opening is clean and sized appropriately for the box.
4. Sediakan Pendawaian: If new wiring is being run, feed the electrical cable through the wall opening. If existing wiring is present, gently pull it through the opening.
5. Insert the Box: Push the electrical cable through one of the knockouts on the Carlon Old Work Box. Insert the box into the prepared wall opening. The swing-out tabs should be retracted or folded inward as you insert the box.
6. Selamatkan Kotak: Once the box is fully inserted and flush with the wall surface, tighten the screws located at the top and bottom of the box. As you tighten, the swing-out tabs will rotate outward and press against the inside of the wall, securing the box firmly in place. Do not overtighten.
7. Wire the Device: Strip the insulation from the electrical wires as required. Connect the wires to your electrical device (switch or receptacle) according to the device's instructions and local electrical codes.
8. Pasang Peranti: Mount the electrical device into the Carlon Old Work Box using the provided screws.
9. Pulihkan Kuasa: Once the device is securely installed and covered with a faceplate, turn the power back on at the circuit breaker.

5. Arahan Operasi

The Carlon B114R-UPC Number-1G Old Work Box serves as a housing and mounting point for electrical devices. Once properly installed and wired with a switch or receptacle, its operation is dependent on the functionality of the installed electrical device. There are no specific operational steps for the box itself.

6. Penyelenggaraan

The Carlon B114R-UPC Number-1G Old Work Box requires minimal maintenance once installed. Periodically, it is advisable to:

• Inspect the faceplate for any cracks or damage.
• Ensure the electrical device (switch/receptacle) remains securely mounted within the box.
• If any issues arise with the electrical device, turn off power at the breaker before inspecting the wiring within the box.

7. Penyelesaian masalah

Most issues related to an electrical box are typically associated with the wiring or the device installed within it. However, here are some common box-related concerns:

• Box is Loose in Wall:
  • Ensure the securing screws for the swing-out tabs are fully tightened.
  • Verify that the wall opening was cut to the correct size, not excessively large.
• Electrical Device Does Not Fit:
  • Confirm that the Carlon B114R-UPC is a single-gang box, suitable for standard single-gang devices.
  • Check for any obstructions inside the box or issues with the device's mounting tabs.

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information or technical support regarding your Carlon B114R-UPC Number-1G Old Work Box, please refer to the official Carlon webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Simpan resit pembelian anda sebagai bukti pembelian.

Carlon Customer Service: Please visit the official Carlon weblaman web untuk maklumat hubungan.