HOFTRONIC Esto 2-Light GU10 Black LED Spotlight

1. Pengenalan

Thank you for choosing the HOFTRONIC Esto 2-Light GU10 Black LED Spotlight. This product is designed for indoor use, providing adjustable lighting with two GU10 LED bulbs. Constructed from high-quality aluminum, this spotlight offers a modern aesthetic and reliable performance. Please read this manual carefully before installation and use to ensure safe and optimal operation.

Image: The HOFTRONIC Esto 2-Light GU10 Black LED Spotlight installed on a ceiling, providing illumination in a modern interior setting.

2. Arahan Keselamatan

• Always disconnect the main power supply before attempting any installation, maintenance, or bulb replacement.
• Installation should be performed by a qualified electrician to ensure compliance with local electrical codes and safety standards.
• This product is rated IP20 and is suitable for kegunaan dalaman sahaja. Do not expose to moisture or direct water.
• Pastikan voltage supply matches the product's requirements (230V AC).
• Jangan melebihi wat maksimumtage of 35 Watts per GU10 LED bulb.
• Pastikan pengudaraan yang mencukupi di sekeliling lekapan untuk mengelakkan terlalu panas.
• Do not cover the fixture with insulating material unless specifically designed for it.

3. Kandungan Kotak

Sila pastikan semua komponen ada dan tidak rosak sebelum meneruskan pemasangan.

Image: Contents of the product box, including the spotlight fixture and mounting hardware.

• 1x HOFTRONIC Esto Double Black LED Ceiling Spot Fixture
• 1x Kunci Allen
• 4x Skru
• 4x Pencuci
• 4x Palam Dinding

4. Persediaan dan Pemasangan

Follow these steps for safe and correct installation of your LED spotlight.

1. Sediakan untuk Pemasangan: Pastikan bekalan kuasa utama ke kawasan pemasangan dimatikan pada pemutus litar.
2. Tandakan Titik Penggerudian: Position the fixture on the ceiling at the desired location. Use the mounting holes on the base of the fixture to mark the drilling points. Refer to the diagram below for mounting dimensions.


Image: Detailed diagram of the spotlight's base with mounting hole dimensions (69mm x 69mm spacing, 4mm diameter holes, 13mm edge distance, max 12mm cable inlet).

3. Lubang gerudi: Drill holes at the marked points. Insert the provided wall plugs into the drilled holes.
4. Sambungan Pendawaian: Open the terminal cover on the fixture. Carefully connect the electrical wires from your ceiling to the terminal block inside the fixture. Ensure correct connections: Live (L), Neutral (N), and Earth (⌀). The cable inlet supports a maximum diameter of 12mm.
5. Pasang Lekapan: Align the fixture's mounting holes with the wall plugs. Secure the fixture to the ceiling using the provided screws and washers. Do not overtighten.
6. Insert GU10 Bulbs: Insert two GU10 LED bulbs (not included) into the lamp holders. Ensure they are securely twisted into place. Do not exceed 35 Watts per bulb.
7. Pulihkan Kuasa: Once installation is complete and all connections are secure, restore the main power supply.

5. Arahan Operasi

The HOFTRONIC Esto spotlight is designed for simple operation.

• Hidupkan/Mati Kuasa: Control the spotlight using your standard wall light switch.
• Laraskan Arah Cahaya: The GU10 fittings are tiltable, allowing you to adjust the light direction by up to 30 degrees. Gently pivot the inner lamp holders to direct the light as desired.

Image: Illustration of the adjustable light direction, demonstrating the 30-degree tilt capability of the GU10 fittings.

6. Penyelenggaraan

Regular maintenance will help prolong the life and appearance of your spotlight.

• Pembersihan: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior of the spotlight with a soft, dry, or slightly damp kain. Jangan gunakan pembersih yang melelas, pelarut atau bahan kimia yang keras, kerana ini boleh merosakkan kemasan.
• Penggantian mentol:
  1. Matikan bekalan kuasa ke lekapan.
  2. Allow the bulb to cool completely if it has been recently in use.
  3. Gently push the GU10 bulb into its fitting and twist it counter-clockwise to remove.
  4. Insert a new GU10 LED bulb (max 35W) by pushing it into the fitting and twisting clockwise until secure.
  5. Pulihkan kuasa.

7. Penyelesaian masalah

If you encounter issues with your spotlight, refer to the following common problems and solutions:

• Lampu tidak menyala:
  • Check if the main power supply is on.
  • Ensure the wall switch is in the 'on' position.
  • Verify that the GU10 bulbs are correctly inserted and not faulty.
  • Inspect wiring connections for looseness or damage (ensure power is off before inspection).
• Kelipan cahaya:
  • Ensure GU10 bulbs are fully seated in their sockets.
  • Try replacing the bulb to rule out a faulty bulb.
  • Periksa sambungan pendawaian yang longgar (dengan kuasa dimatikan).
• Fixture feels hot:
  • Confirm that the installed GU10 bulbs do not exceed the maximum wattage daripada 35W.
  • Ensure there is no obstruction preventing proper heat dissipation.

If problems persist, contact customer support or a qualified electrician.

8. Spesifikasi

Image: Overall dimensions of the HOFTRONIC Esto 2-Light GU10 Black LED Spotlight.

9. Waranti

This HOFTRONIC product comes with a Waranti 3 tahun, reflecting our commitment to quality and durable construction. The robust aluminum enclosure ensures a long lifespan for your ceiling light.

Image: Warranty information, indicating a 3-year warranty and durable build quality.

10. Sokongan

For further assistance, technical support, or warranty claims, please contact your retailer or the HOFTRONIC customer service department. Refer to your purchase documentation for contact details.