Produk Selesaiview
This document provides instructions for the DIGITEN Digital Waterproof Temperature and Humidity Sensor Probe, designed exclusively for use with the DIGITEN DHTC-1011 Temperature and Humidity Controller.
The sensor probe measures both temperature and humidity, providing essential data to your DHTC-1011 controller for accurate environmental monitoring and control. Its waterproof design allows for use in various environments where moisture is present.
Image: The DIGITEN DHTC-1011 Digital Waterproof Temperature and Humidity Sensor Probe, showing the main sensor unit with its protective casing and connected wires.
Keserasian
Penting: This sensor probe is specifically designed and compatible sahaja with the DIGITEN DHTC-1011 Temperature and Humidity Controller. It is not intended for use with other models or brands of controllers.
Persediaan dan Pemasangan
- Unpack the Sensor: Carefully remove the sensor probe from its packaging. Inspect for any visible damage.
- Locate the Sensor Port: Identify the dedicated sensor input port on your DIGITEN DHTC-1011 Temperature and Humidity Controller. This port is typically labeled for the temperature and humidity sensor.
- Sambungkan Sensor: Insert the 3.5mm jack connector of the sensor probe firmly into the corresponding port on the DHTC-1011 controller. Ensure a secure connection.
- Letakkan Probe: Place the waterproof sensor probe in the environment where temperature and humidity measurements are required. Ensure the probe is not obstructed and has adequate airflow for accurate readings.
- Hidupkan kuasa: Once connected and positioned, power on your DHTC-1011 controller. The controller should automatically detect the sensor and begin displaying readings.
Image: Close-up of the 3.5mm jack connector on the sensor probe cable, ready for connection to the controller.
Arahan Operasi
After successful installation, the sensor probe continuously transmits temperature and humidity data to your DIGITEN DHTC-1011 controller. Refer to your DHTC-1011 controller's user manual for specific instructions on:
- Viewing current temperature and humidity readings.
- Setting desired temperature and humidity control ranges.
- Calibrating the sensor (if supported by the controller).
- Understanding alarm functions related to sensor readings.
The sensor itself does not have user-adjustable settings; all controls are managed through the connected DHTC-1011 controller.
Penyelenggaraan
- Pembersihan: Periodically clean the sensor probe with a soft, damp cloth to remove dust or debris that may accumulate on its surface. Avoid using harsh chemicals or abrasive materials.
- Pemeriksaan Kabel: Regularly inspect the sensor cable for any signs of damage, kinks, or exposed wires. Damaged cables can lead to inaccurate readings or sensor malfunction. If damage is found, replace the sensor probe.
- Integriti Kalis Air: While the probe is waterproof, ensure the connection point to the controller remains dry unless the controller itself is rated for wet environments.
- Storan: If storing the sensor, ensure it is clean and dry, and store it in a safe place to prevent physical damage to the probe or cable.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| No readings or incorrect readings on controller. |
|
|
| Humidity reading does not change or is stuck. |
|
|
| Temperature reading is inaccurate (e.g., consistently high or low). |
|
|
Spesifikasi
- Keserasian: Exclusively for DIGITEN DHTC-1011 Temperature and Humidity Controller
- Julat Kawalan Suhu: -40°C hingga 120°C / -40°F hingga 248°F
- Julat Kawalan Kelembapan: 1-100% RH
- Ketepatan Suhu: ± 0.3 ° C / ± 0.3 ° F
- Ketepatan Kelembapan: ±2% RH
- Sensor Lead Length: 2 meter (6 kaki)
- kalis air: ya
- Jenis Pemasangan: Tabletop (referring to the controller, the probe itself is typically placed)
- Keperluan Bateri: No batteries required (powered by controller)
Maklumat Waranti
DIGITEN provides a one-year warranty term for any quality problems with this product. Please retain your proof of purchase for warranty claims. For further details or to initiate a warranty claim, please contact DIGITEN customer support.
Sokongan Pelanggan
If you encounter any issues or have questions regarding the DIGITEN Digital Waterproof Temperature and Humidity Sensor Probe, please contact DIGITEN customer support through the retailer's platform or visit the official DIGITEN webtapak untuk mendapatkan bantuan.
For more information about DIGITEN products, visit the DIGITEN Store on Amazon.
