Armor3 Soundtac Universal Gaming Headset Instruction Manual

1. Pengenalan

The Armor3 Soundtac Universal Gaming Headset provides high-quality audio and clear communication for an immersive gaming experience. Designed for broad compatibility, this headset features a 3.5mm audio jack for connection to various gaming consoles and computers. It includes inline controls for volume adjustment and microphone management.

2. Kandungan Pakej

• Armor3 Soundtac Universal Gaming Headset
• Kabel Audio 3.5mm (bersepadu)

Image: The Armor3 Soundtac Universal Gaming Headset shown within its retail packaging.

3. Produk Lebihview

3.1 Komponen Alat dengar

Image: A general view of the Armor3 Soundtac Universal Gaming Headset, highlighting its overall design.

Image: The headset with its flexible microphone boom extended, ready for use.

3.2 Kawalan Sebaris

Imej: A terperinci view of the inline control unit, showing the volume dial and the microphone on/off switch.

• Kawalan Kelantangan: A rotary dial located on the inline control unit to adjust audio output level.
• Suis Hidup/Mati Mikrofon: A toggle switch on the inline control unit to mute or unmute the microphone.
• Bicu Audio 3.5mm: The universal connector for audio and microphone input/output.

4. Arahan Persediaan

4.1 Connecting to Gaming Consoles (Nintendo Switch, PS4, PS5, Xbox Series X/S, Xbox One, Wii U)

1. Locate the 3.5mm audio jack on your gaming console or controller.
2. Insert the 3.5mm audio plug from the headset firmly into the console's or controller's audio jack.
3. Adjust the volume using the inline volume control on the headset.
4. Ensure the microphone switch is in the 'On' position for voice communication.

4.2 Connecting to PC/Mac

For PC/Mac systems that have separate audio output and microphone input jacks, a 3.5mm audio splitter (not included with all models, may be required) is necessary. If your PC/Mac has a single combined 3.5mm audio jack, a splitter is not needed.

1. If your PC/Mac has separate audio and microphone jacks: Connect the headset's 3.5mm plug to a compatible 3.5mm audio splitter (e.g., a Y-splitter with separate headphone and microphone outputs). Then, connect the splitter's headphone output to your PC's audio output jack and the microphone output to your PC's microphone input jack.
2. If your PC/Mac has a single combined 3.5mm audio jack: Insert the headset's 3.5mm audio plug directly into the jack.
3. Access your computer's sound settings to ensure the headset is selected as the default audio output and input device.
4. Adjust the volume using the inline control and ensure the microphone switch is 'On'.

5. Arahan Operasi

5.1 Melaraskan Kelantangan

• Rotate the volume dial on the inline control unit to increase or decrease the audio level.
• Further volume adjustments can be made through your connected device's system settings.

5.2 Menggunakan Mikrofon

• To activate the microphone, slide the microphone on/off switch on the inline control unit to the 'On' position.
• To mute the microphone, slide the switch to the 'Off' position.
• Position the flexible microphone boom appropriately for clear voice pickup, typically near your mouth.

6. Penyelenggaraan

• Pembersihan: Gunakan kain lembut dan kering untuk membersihkan set kepala. Jangan gunakan bahan kimia yang keras atau bahan yang melelas.
• Storan: Simpan alat dengar di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
• Penjagaan Kabel: Elakkan selekoh tajam atau tarikan berlebihan pada kabel untuk mengelakkan kerosakan.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti & Sokongan

9.1 Maklumat Waranti

This product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Armor3 webtapak untuk terma dan syarat jaminan terperinci. Simpan bukti pembelian anda untuk tuntutan waranti.

9.2 Sokongan Pelanggan

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Armor3 customer support. Contact information can typically be found on the product packaging or the official Armor3 webtapak.