BONTEC MD04

BONTEC MD04 Sit-Stand Desk Converter Instruction Manual

1. Pengenalan

Thank you for choosing the BONTEC MD04 Sit-Stand Desk Converter. This product is designed to transform your existing desk into an ergonomic sit-stand workstation, promoting better posture and reducing strain during long working hours. Its two-tier design provides ample space for monitors, keyboards, and mice, while the gas spring mechanism allows for smooth and effortless height adjustments.

This manual provides essential information for the safe and efficient use of your desk converter. Please read it thoroughly before assembly and operation, and retain it for future reference.

2. Maklumat Keselamatan

Always ensure the desk converter is placed correctly on a stable and level surface. Do not exceed the maximum load capacity of 15 kg (33 lbs) to maintain stability and prevent accidents. Keep the work area clear of obstructions to avoid tripping hazards when adjusting the height. Ensure all cables are managed to prevent entanglement during height transitions. Avoid placing hands or fingers near moving parts during adjustment.

3. Kandungan Pakej

Sila sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

  • BONTEC MD04 Sit-Stand Desk Converter (Main Unit)
  • Dulang Papan Kekunci
  • Two adhesive cable management clips
  • Assembly Tools (if required, minimal assembly is needed)

4. Persediaan

The BONTEC MD04 desk converter requires minimal assembly. Follow these steps to set up your workstation:

  1. Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
  2. Place the main unit of the desk converter on your existing desk in the desired position.
  3. Attach the keyboard tray to the designated slots on the main unit. Ensure it is securely fastened.
  4. Organize your monitors, keyboard, and mouse on the respective platforms.
  5. Use the provided adhesive cable management clips to secure any loose cables, maintaining a tidy workspace.
Diagram showing four steps for easy assembly of the BONTEC sit-stand desk converter.
Figure 4.1: Easy and fast assembly process. Simply unbox, place the main unit, attach the keyboard tray, and arrange your setup.

5. Arahan Operasi

The BONTEC MD04 features a gas spring mechanism for smooth height adjustment. This allows you to effortlessly switch between sitting and standing positions.

5.1 Melaraskan Ketinggian

  1. To raise the workstation, gently squeeze the levers located on both sides of the upper platform.
  2. While holding the levers, guide the platform upwards to your desired standing height. Release the levers to lock the platform in place.
  3. To lower the workstation, gently squeeze the levers again. Apply slight downward pressure to guide the platform to your desired sitting height. Release the levers to lock it.

The height can be adjusted freely between 115 mm (4.5 inches) and 505 mm (19.9 inches).

sebelah view diagram illustrating the minimum and maximum adjustable heights of the desk converter.
Figure 5.1: The desk converter offers a height range from 115mm (min) to 505mm (max) for personalized ergonomic settings.
Diagram showing a person working in sitting and standing positions with the desk converter, highlighting ergonomic benefits.
Figure 5.2: Transitioning between sitting and standing positions helps improve posture and reduce discomfort.

6. Penyelenggaraan

To ensure the longevity and optimal performance of your BONTEC MD04 Sit-Stand Desk Converter, follow these simple maintenance guidelines:

  • Pembersihan: Lap permukaan dengan iklanamp kain. Elakkan menggunakan bahan kimia yang keras atau pembersih yang kasar, kerana ini boleh merosakkan kemasan.
  • Pemeriksaan: Periksa semua skru dan sambungan secara berkala untuk memastikan ia ketat. Ketatkan semula jika perlu.
  • Spring Gas: The gas spring mechanism is designed for maintenance-free operation. Do not attempt to lubricate or disassemble it.

7. Penyelesaian masalah

If you encounter any issues with your BONTEC MD04 Sit-Stand Desk Converter, please refer to the following common troubleshooting tips:

  • Kesukaran Melaraskan Ketinggian: Ensure that the levers on both sides are fully squeezed. Check that the weight on the desk converter does not exceed the maximum capacity of 15 kg (33 lbs).
  • Bergoyang-goyang atau Ketidakstabilan: Verify that the desk converter is placed on a flat, stable surface. Check all assembly connections to ensure they are tight. Ensure the weight is evenly distributed on the platforms.
  • Noise During Adjustment: A slight sound during adjustment is normal due to the gas spring mechanism. If the noise is excessive or unusual, ensure no parts are rubbing against each other or that the unit is not overloaded.

Jika masalah berterusan selepas mencuba penyelesaian ini, sila hubungi sokongan pelanggan.

8. Spesifikasi

CiriSpesifikasi
Nombor ModelMD04
JenamaBONTEC
Dimensi Produk (D x W x H)41 x 80 x 50.5 cm (16.1 x 31.5 x 19.9 inci)
Top Platform Dimensions800 x 400 mm (31.5 x 15.7 inci)
Ketinggian Minimum11.5 cm (4.5 inci)
Ketinggian Maksimum50.5 cm (19.9 inci)
Kapasiti Berat15 kg (33 lbs)
bahanKayu Kejuruteraan (Atas), Keluli Aloi (Tapak)
warnaHitam
Ciri KhasAdjustable, Ergonomic, Gas Spring Mechanism, Pre-drilled grommet hole for monitor mounts
Perhimpunan Diperlukanminima
Diagram illustrating the dimensions of the BONTEC sit-stand desk converter, including width, depth, and height ranges.
Figure 8.1: Detailed dimensions and weight capacity of the desk converter.
Diagram highlighting safety features of the desk converter, including gas spring, non-slip pads, and rounded corners.
Figure 8.2: Safety design elements such as concealed safety locks, safe round corner design, non-slip pads, and the gas spring mechanism.

9. Waranti

The BONTEC MD04 Sit-Stand Desk Converter comes with a Limited Warranty. This warranty covers manufacturing defects in materials and workmanship under normal use. Please refer to the product packaging or contact BONTEC customer support for specific terms and conditions of your warranty.

10. Sokongan

For further assistance, technical support, or warranty claims, please contact BONTEC customer service through the retailer where you purchased the product or visit the official BONTEC website. Please have your model number (MD04) and purchase information ready when contacting support.

Sumber Dalam Talian: Untuk maklumat produk tambahan, Soalan Lazim dan sokongan, sila lawati BONTEC Brand Store.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.