Onforu 100W Dusk to Dawn Outdoor LED Flood Light Instruction Manual

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your Onforu 100W Dusk to Dawn Outdoor LED Flood Light. Please read this manual thoroughly before installation and use, and retain it for future reference. This flood light is designed for outdoor use, featuring a photocell sensor for automatic operation and adjustable heads for broad illumination.

Image 1.1: Onforu 100W Dusk to Dawn Outdoor LED Flood Light installed on a house, providing bright illumination.

2. Maklumat Keselamatan

AMARAN: Risiko renjatan elektrik. Putuskan kuasa pada fius atau pemutus litar sebelum memasang atau menservis.

• Pastikan bekalan kuasa dimatikan sebelum pemasangan atau penyelenggaraan.
• Pemasangan hendaklah dilakukan oleh juruelektrik bertauliah mengikut kod elektrik tempatan.
• Jangan pasang pada permukaan yang tidak kukuh dari segi struktur.
• Jangan melihat terus ke arah sumber cahaya LED apabila ia menyala.
• Jauhkan bahan mudah terbakar dari lekapan lampu.
• This product is not intended for use with motion sensors.
• This product is not solar powered.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• 1 x Onforu 100W Dusk to Dawn Outdoor LED Flood Light
• 1 x Kurungan Pemasangan
• 1 x Gasket Getah
• 1 x Black Cap for Photocell (for switch-controlled mode)
• Mounting Screws and Wire Nuts
• Manual Arahan

Image 3.1: The flood light fixture and included installation hardware.

4. Ciri-ciri Produk

• Kecerahan Tinggi: 100W LED flood light producing up to 9000 lumens with 154 LEDs.
• Kepala boleh laras: Tiga lamp heads can be adjusted independently to customize lighting angles and provide a wide light range (up to 120° beam angle).
• Sensor Senja hingga Fajar: Integrated photocell sensor automatically turns the light on at night (10-20 Lux) and off during the day (30-60 Lux).
• Switch-Controlled Mode: Option to cover the photocell sensor with the included black cap to enable manual control via a wall switch.
• IP65 Kalis Air: Ensures reliable operation in various weather conditions, including rain, sleet, and snow.
• Penyejukan yang cekap: Constructed with high-quality aluminum housing and a fin-type heat sink design for effective heat dissipation, prolonging LED lifespan.
• Penjimatan Tenaga: Advanced high-efficiency LEDs reduce electricity consumption by over 80%.

Image 4.1: The three adjustable lamp heads and the light perception sensor.

Image 4.2: The light demonstrating its IP65 waterproof capability during rainfall.

5. Persediaan dan Pemasangan

This product requires hardwired installation. Ensure power is disconnected before proceeding.

1. Sediakan Pendawaian: Ensure the electrical box is properly installed and the power is off at the circuit breaker.
2. Pendakap Pelekap: Attach the mounting bracket to the electrical box using the provided screws. Ensure the rubber gasket is placed between the bracket and the mounting surface for a watertight seal.
3. Sambungan Pendawaian: Connect the light fixture's wires to your household wiring:
   • Black wire (Live) to the Live wire.
   • White wire (Neutral) to the Neutral wire.
   • Green wire (Ground) to the Ground wire.
   Kencangkan sambungan dengan nat dawai.
4. Lampirkan Lekapan: Align the light fixture with the mounting bracket and secure it with the central screw. Ensure the fixture is flush against the mounting surface.
5. Laraskan Kepala: Loosen the screws on the adjustable heads to position them to your desired lighting angles. Tighten the screws to secure the heads.
6. Pulihkan Kuasa: Hidupkan kuasa pada pemutus litar.

Image 5.1: Wiring diagram for installation.

Image 5.2: Visual guide for the installation process.

6. Arahan Operasi

The Onforu 100W Dusk to Dawn Outdoor LED Flood Light offers two operating modes:

6.1. Dusk to Dawn Mode (Default)

In this mode, the integrated photocell sensor detects ambient light levels. The light will automatically turn on when the ambient light drops to 10-20 Lux (at dusk) and turn off when the ambient light increases to 30-60 Lux (at dawn).

Image 6.1: The light operating in automatic dusk to dawn mode.

6.2. Switch-Controlled Mode

To operate the light manually via a wall switch, cover the photocell sensor with the provided black cap. This will prevent the sensor from detecting ambient light, allowing the light to be controlled solely by the external switch.

Image 6.2: Using the black cap to enable switch-controlled mode.

7. Penyelenggaraan

• Pembersihan: Periodically clean the light fixture and photocell sensor with a soft, damp kain untuk memastikan prestasi optimum. Jangan gunakan pembersih atau pelarut yang kasar.
• Pemeriksaan: Regularly inspect the wiring and mounting for any signs of damage or loosening.
• Penggantian LED: The LEDs are integrated and not user-replaceable.

8. Penyelesaian masalah

9. Spesifikasi

10. Waranti dan Sokongan

This product is sold with no stated warranty. For any questions or technical assistance, please refer to the retailer's customer service or the manufacturer's official webtapak untuk pilihan sokongan.