COMFAST CF-WR301S

COMFAST CF-WR301S 300Mbps Wireless Repeater/Router/Access Point User Manual

Model: CF-WR301S

1. Pengenalan

The COMFAST CF-WR301S is a versatile wireless networking device designed to enhance and extend your existing Wi-Fi coverage. It supports multiple operating modes, including Repeater, Router, and Access Point (AP) modes, providing flexible solutions for various network requirements. This manual provides detailed instructions for setting up, operating, and maintaining your device to ensure optimal performance.

COMFAST CF-WR301S device with two external antennas.

Figure 1: The COMFAST CF-WR301S device with its two external antennas.

2. Maklumat Keselamatan

  • Ensure the device is plugged into a power outlet with the correct voltage.
  • Jangan dedahkan peranti kepada air, lembapan atau suhu yang melampau.
  • Elakkan meletakkan peranti berhampiran sumber haba atau di bawah cahaya matahari langsung.
  • Pastikan pengudaraan yang mencukupi di sekitar peranti untuk mengelakkan terlalu panas.
  • Do not attempt to open or repair the device yourself. Contact qualified personnel for service.

3. Produk Lebihview

The COMFAST CF-WR301S features a compact design with dual external antennas for improved signal reception and transmission. It includes LED indicators for power, Wi-Fi status, and signal strength, providing visual feedback on its operational status.

COMFAST CF-WR301S highlighting its compact design and key features.

Figure 2: The COMFAST CF-WR301S highlighting its compact design and key features like signal penetration, 300Mbps speed, 80m coverage, and efficient heat dissipation.

3.1 Ciri Fizikal

  • Antena: Two external 3dBi antennas for enhanced wireless coverage.
  • Penunjuk LED: Power (Green), Wi-Fi (Green/Red for signal strength).
  • Butang WPS/RST: Used for WPS pairing or resetting the device to factory defaults (press for 5 seconds).
  • Port LAN: For wired connections in Access Point or Router mode.
Illustration showing the COMFAST CF-WR301S with its dual antennas, depicting how it enhances WiFi signal penetration through walls.

Figure 3: Illustration showing the COMFAST CF-WR301S with its dual antennas, depicting how it enhances WiFi signal penetration through walls for wider coverage.

4. Persediaan

This section guides you through the initial setup of your COMFAST CF-WR301S. The device supports Repeater Mode and Access Point Mode.

4.1 Sambungan Awal

  1. Hidupkan kuasa: Plug the CF-WR301S into a power outlet. Wait for the Power LED to turn green.
  2. Sambung ke Peranti: On your computer or smartphone, search for available Wi-Fi networks. Connect to the network named CF-WR301S_xxxx (where xxxx are the last four digits of the device's MAC address). No password is required for the initial connection.
  3. Akses Web Antara muka: Buka a web pelayar dan masukkan 192.168.10.1 in the address bar. This will open the device's configuration page.
The COMFAST CF-WR301S plugged into a power strip, demonstrating its compact 'mini size'.

Figure 4: The COMFAST CF-WR301S plugged into a power strip, demonstrating its compact 'mini size' that does not obstruct adjacent outlets.

4.2 Repeater Mode Setup

Repeater mode extends the coverage of an existing Wi-Fi network.

  1. Selepas mengakses web interface (192.168.10.1), select Mod Pengulang.
  2. The device will scan for available Wi-Fi networks. Select the network you wish to extend from the list.
  3. Masukkan kata laluan Wi-Fi untuk rangkaian yang dipilih.
  4. You can choose to keep the same SSID (network name) or create a new one for the extended network.
  5. klik Mohon or Jimat. The device will restart. Once the Wi-Fi indicator turns green, the setup is complete.

4.3 Access Point (AP) Mode Setup

AP mode converts a wired internet connection into a wireless network.

  1. Connect an Ethernet cable from your router or modem to the LAN port of the CF-WR301S.
  2. Akses ke web interface (192.168.10.1) and select Mod AP.
  3. Configure the new Wi-Fi network name (SSID) and password.
  4. klik Mohon or Jimat. The device will restart. Once the Wi-Fi indicator turns green, the setup is complete.
A three-step visual guide demonstrating the setup process for the COMFAST CF-WR301S using a smartphone interface.

Figure 5: A three-step visual guide demonstrating the setup process for the COMFAST CF-WR301S using a smartphone interface, including connecting to the default SSID, accessing the web GUI, and selecting the WiFi signal to extend.

5. Mod Operasi

5.1 Mod Pengulang

In Repeater Mode, the CF-WR301S wirelessly connects to your existing router's Wi-Fi network and re-broadcasts it, effectively extending the signal to areas with poor coverage. This mode is ideal for eliminating Wi-Fi dead zones.

5.2 Mod Titik Akses (AP).

In AP Mode, the CF-WR301S connects to your wired network via an Ethernet cable and creates a new wireless network. This is useful for adding Wi-Fi capability to a wired-only network or for creating a separate Wi-Fi network.

6. Penyelenggaraan

  • Pembersihan: Gunakan kain lembut dan kering untuk membersihkan peranti. Jangan gunakan pembersih cecair atau aerosol.
  • Kemas kini Firmware: Semak pegawai COMFAST secara berkala webtapak untuk kemas kini perisian tegar bagi memastikan prestasi dan keselamatan yang optimum.
  • penempatan: For best performance, place the device in a central location, away from obstructions and sources of interference.
The COMFAST CF-WR301S with a magnified view of its side ventilation slots, illustrating its design for efficient heat dissipation.

Figure 6: The COMFAST CF-WR301S with a magnified view of its side ventilation slots, illustrating its design for efficient heat dissipation and stable operation.

7. Penyelesaian masalah

  • Tidak boleh akses web antara muka (192.168.10.1): Ensure your device is connected to the CF-WR301S's default Wi-Fi network. Try clearing your browser's cache or using a different browser.
  • Tiada sambungan internet selepas persediaan: Verify that the main router has an active internet connection. In Repeater Mode, ensure you entered the correct password for the host Wi-Fi network. In AP Mode, confirm the Ethernet cable is securely connected and providing internet.
  • Weak signal or slow speed: Relocate the CF-WR301S closer to your main router. Ensure there are no major obstructions (thick walls, metal objects) between the devices.
  • Menetapkan semula peranti: If you encounter persistent issues, press and hold the WPS/RST button for approximately 5 seconds until the LEDs flash. This will restore the device to factory default settings.

8. Spesifikasi

Detailed technical specifications for the COMFAST CF-WR301S.

Figure 7: Detailed technical specifications for the COMFAST CF-WR301S.

CiriPenerangan
Nama ModelCF-WR301S
Kekerapan2.412~2.472GHz
Standard Tanpa WayarSupport IEEE802.11b/g/n standard
Kadar Tanpa Wayar300Mbps
Butang1*WPS/RST Button (Press 5 seconds for RST)
PenunjukPower Indicator (Green Color), WiFi Indicator (Green: Good Signal; Red: Weak Signal)
PenyulitanWPA-PSK/WPA2-PSK; WPA/WPA2
Mod KerjaMod Pengulang, Mod AP
Saiz156*78*43mm (Measured manually with slight deviation)
Suhu Bekerja-10 C~40 C
Suhu Penyimpanan-40 C~70 C
Kelembapan Bekerja10%~90%RH Tidak pemeluwapan
Kelembapan Penyimpanan5%~90%RH Tidak pemeluwapan

9. Waranti dan Sokongan

Untuk maklumat jaminan dan sokongan teknikal, sila rujuk dokumentasi yang disediakan bersama pembelian anda atau lawati laman web rasmi COMFAST. website. If you encounter issues not covered in this manual, please contact COMFAST customer support for assistance.

Image displaying the contents of the COMFAST CF-WR301S package, including the device and its quick installation guide.

Figure 8: Image displaying the contents of the COMFAST CF-WR301S package, including the CF-WR301S device and its quick installation guide.

© 2023 COMFAST. Semua hak terpelihara.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.