JIARUIXIN weelye RX74 24V Remote Control and Receiver Kit Instruction Manual

1. Produk Lebihview dan Keserasian

This instruction manual provides guidance for the JIARUIXIN weelye RX74 24V Bluetooth Remote Control and Receiver Kit, designed as a replacement part for children's electric ride-on cars.

Kit termasuk:

• Penerima: Model RX74-24V CE FC, featuring a 7-pin four-sided socket.
• Kawalan Jauh: Model TX20 CE FC.
• Voltage: 24V system.

Pemeriksaan Keserasian: To ensure this control box fits your specific ride-on car, open your existing electric ride-on car and examine the control box. If the appearance and the digital model number (e.g., RX74-24V) on the side of your existing receiver box match this product, it should be compatible.

Imej 1: Selesaiview of the weelye RX74 24V Receiver Kit. This image shows the main receiver unit with its wiring and connectors.

Image 2: Close-up of the weelye RX74 24V Receiver showing the model identification label. Verify this label matches your existing unit for compatibility.

2. Setup: Frequency Matching Instructions

Frequency matching is required for the first use or when replacing the remote control batteries to establish communication between the remote control and the ride-on car's receiver.

1. Pasang Bateri Kawalan Jauh: Open the battery compartment of the TX20 remote control. Install two AAA 1.5V batteries, ensuring correct positive and negative polarity. Close the battery cover. The indicator light on the remote will flash three times, confirming correct battery installation.
2. Initiate Pairing Mode on Remote: Press and hold the frequency key (often labeled "car select" or "P" for pairing) on the remote control for approximately 2 to 4 seconds. The indicator light on the remote will begin to flash, indicating it is in pairing mode.
3. Power On the Ride-On Car: Turn on the main power supply of the children's ride-on car.
4. Sahkan Gandingan: The indicator light on the remote control will turn off, and the low-speed LED lights on the car will change from flashing to a steady illumination. This indicates that the frequency matching has been successful.

Nota Penting: If the frequency matching is unsuccessful (the remote's indicator light does not turn off, or the car's low-speed LED lights continue to flash), please turn off the power supply of the car and repeat steps 2 and 3.

Imej 3: Depan view of the TX20 Remote Control. This shows the directional and function buttons.

Image 4: Back of the TX20 Remote Control showing printed operation instructions, including frequency binding steps and button descriptions.

Imej 5: Belakang view of the TX20 Remote Control, showing the battery compartment and general layout.

3. Arahan Operasi

Once the remote control is successfully paired with the ride-on car, you can operate the vehicle using the following buttons:

• △ (Up Arrow): Moves the car forward.
• ▽ (Down Arrow): Moves the car backward.
• < (Left Arrow): Turns the car left.
• > (Right Arrow): Turns the car right.
• S (Speed): Adjusts the speed setting of the car.
• P (Emergency Brake): Press this button to activate the emergency brake, which will stop the car's running function. Press it again to release the brake and resume normal operation.

Mod jimat tenaga: If the remote control is left without operation for approximately 10 seconds, its indication light will turn off, and it will enter a power-saving mode to conserve battery life.

4. Penyelenggaraan

To ensure the longevity and proper functioning of your remote control and receiver kit, consider the following maintenance guidelines:

• Penggantian Bateri: Replace the AAA batteries in the remote control when the indicator light becomes dim or unresponsive. Always use fresh batteries and ensure correct polarity. After battery replacement, perform the frequency matching steps outlined in Section 2.
• Pembersihan: Wipe the remote control and receiver box with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Storan: Store the kit in a dry place, away from extreme temperatures and direct sunlight, when not in use for extended periods.
• Pemeriksaan: Periodically check the wiring and connectors for any signs of wear or damage.

5. Penyelesaian masalah

If you encounter issues with the remote control or receiver, refer to the following common problems and solutions:

Problem: Remote control does not operate the car, or the indicator light on the remote does not turn off after attempting to pair.

Kemungkinan Punca: Unsuccessful frequency matching or depleted remote control batteries.

Penyelesaian:

1. Ensure the remote control has fresh AAA batteries installed correctly.
2. Turn off the power supply of the ride-on car.
3. Repeat the frequency matching steps precisely as described in Section 2: "Setup: Frequency Matching Instructions."
4. If the issue persists, verify that the RX74-24V receiver is correctly installed and connected within the ride-on car.

6. Spesifikasi

7. Waranti dan Sokongan

Information regarding specific warranty terms for this product is not provided in the available documentation. For warranty claims or technical support, please refer to the retailer or manufacturer's official contact channels where the product was purchased.

Anda juga boleh melawat JIARUIXIN Store on Amazon for additional product information or to contact the seller directly.