1. Pengenalan
This manual provides essential information for the proper installation, operation, and maintenance of your LiebeWH 5S Li-ion Battery Protection Board. This board is designed to manage and protect 5 series Li-ion battery cells, commonly used in electric power tools and other applications requiring 18.5V (nominal) to 21V (full charge) battery packs with a maximum discharge current of 15A. It integrates critical protection features to ensure battery longevity and safe operation.
2. Maklumat Keselamatan
- Always handle Li-ion batteries with extreme care. Incorrect handling can lead to fire, explosion, or severe injury.
- Ensure all connections are correct before applying power. Reverse polarity can damage the protection board and batteries.
- Do not exceed the specified maximum discharge current of 15A.
- Use appropriate wiring gauges for the current draw to prevent overheating.
- Keep the board away from moisture, dust, and extreme temperatures.
- Installation should be performed by individuals familiar with electronics and battery systems.
- Do not attempt to modify or repair the protection board.
3. Produk Lebihview
The LiebeWH 5S Li-ion Battery Protection Board is a Battery Management System (BMS) designed for 5-series lithium-ion battery packs. It provides essential protection functions to safeguard your battery cells.
Figure 1: The protection board supports overcharge, over-discharge, and short circuit protection.
Ciri-ciri Utama:
- Perlindungan Lebihan: Prevents individual battery cells from being charged beyond their safe voltaghad.
- Perlindungan lebihan pelepasan: Menghentikan nyahcas apabila sel mencapai volum selamat minimumnyatage, preventing damage.
- Perlindungan Litar pintas: Automatically cuts off power in case of a short circuit to prevent damage and fire.
- Prestasi Stabil: Provides reliable protection for 5S battery configurations.
- Integrated Charging/Discharging: The charging and discharging connectors are shared, simplifying wiring.
Rajah 2: Atas view of the LiebeWH 5S Li-ion Battery Protection Board.
Rajah 3: Bawah view of the LiebeWH 5S Li-ion Battery Protection Board.
4. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nombor Model | LiebeWHsknqe1d04g |
| Jenis Bateri | 5S Li-ion (Lithium-ion) |
| Nominal Voltage | 18.5V |
| Caj Penuh Voltage | 21V |
| Arus Pelepasan Maksimum | 15A |
| Ciri-ciri Perlindungan | Overcharge, Over-discharge, Short Circuit |
| Charging/Discharging Port | Dikongsi |
| Pengeluar | LiebeWH |
5. Persediaan dan Pemasangan
Careful wiring is crucial for the correct function and safety of the battery pack. Refer to the diagram below for connection points.
Figure 4: Connection points on the LiebeWH 5S Li-ion Battery Protection Board.
- Sediakan Bateri: Ensure your 5 Li-ion cells are balanced in voltage before connecting them to the BMS.
- Kenal pasti Titik Sambungan: The board has specific pads for battery connections (B-, B1, B2, B3, B4, B+) and main power connections (P-, P+).
- B-: Connect to the negative terminal of the first battery cell (Cell 1 negative).
- B1: Connect to the positive terminal of Cell 1 and the negative terminal of Cell 2.
- B2: Connect to the positive terminal of Cell 2 and the negative terminal of Cell 3.
- B3: Connect to the positive terminal of Cell 3 and the negative terminal of Cell 4.
- B4: Connect to the positive terminal of Cell 4 and the negative terminal of Cell 5.
- B+: Connect to the positive terminal of the fifth battery cell (Cell 5 positive). This is the main positive terminal for the battery pack.
- P-: This is the main negative output/input terminal for the load/charger.
- P+: This is the main positive output/input terminal for the load/charger. This should be connected to B+.
- Urutan Pendawaian: Connect the balance wires (B-, B1, B2, B3, B4, B+) in sequence from the lowest voltage point to the highest. Then connect the main discharge/charge wires (P- and P+).
- Sahkan Sambungan: Double-check all connections for correct polarity and secure soldering. Incorrect wiring can lead to immediate damage.
- Insulate: After installation, ensure all exposed connections are properly insulated to prevent short circuits.
6. Arahan Operasi
Once properly installed, the LiebeWH 5S Li-ion Battery Protection Board operates automatically to manage your battery pack. It continuously monitors the voltage of each cell and the overall current flow.
- mengecas: Connect your 21V Li-ion charger to the P+ and P- terminals. The board will manage the charging process, preventing overcharge of individual cells.
- Menyahcas: Connect your electric power tool or other load to the P+ and P- terminals. The board will allow discharge up to 15A and will cut off power if any cell reaches its over-discharge threshold.
- Pengaktifan Perlindungan: If an overcharge, over-discharge, or short circuit event occurs, the board will temporarily cut off power to protect the battery. Normal operation should resume once the fault condition is removed. For over-discharge, a charger connection may be required to reset the protection.
7. Penyelenggaraan
The LiebeWH 5S Li-ion Battery Protection Board is designed for low maintenance. However, following these guidelines can help ensure its longevity:
- Jaga kebersihan: Periodically inspect the board for dust or debris and gently clean with a soft, dry brush if necessary.
- Elakkan Kelembapan: Ensure the board remains dry. Moisture can cause corrosion and short circuits.
- Kawalan Suhu: Operate the battery pack and BMS within recommended temperature ranges. Extreme heat or cold can affect performance and lifespan.
- Periksa Sambungan: Occasionally check that all soldered connections remain secure and free from corrosion.
8. Penyelesaian masalah
If you encounter issues with your battery pack or protection board, consider the following:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada kuasa keluaran | Over-discharge protection activated | Connect a charger to reset the protection. Check individual cell voltages. |
| Bateri tidak dicas | Overcharge protection activated (if cells are already full) or charger issue | Verify charger functionality. Check individual cell voltages. |
| Board gets hot | Excessive current draw or short circuit | Reduce load. Check for short circuits in wiring or load. Ensure proper ventilation. |
| Prestasi tidak konsisten | Unbalanced cells or poor connections | Ensure cells are balanced. Re-check all wiring connections. |
If problems persist, consult a qualified technician or contact LiebeWH customer support.
9. Waranti dan Sokongan
Specific warranty details for the LiebeWH 5S Li-ion Battery Protection Board are not provided in this manual. For warranty claims or technical support, please refer to the retailer where the product was purchased or visit the official LiebeWH webtapak untuk maklumat hubungan.
Pengeluar: LiebeWH
Nombor Model: LiebeWHsknqe1d04g