BONTEC Tilting TV Wall Mount Instruction Manual

1. Pengenalan dan Lebihview

This manual provides detailed instructions for the installation, operation, and maintenance of your BONTEC Tilting TV Wall Mount. This mount is designed for most 26-65 inch LCD, LED, OLED, 4K Flat, and Curved Screen TVs, supporting VESA patterns up to 400x400mm and a maximum weight capacity of 121 lbs (55 kg).

The BONTEC TV wall mount offers a low-profile, slim design that projects just 30mm from the wall, providing a clean and modern appearance. It features a 10-degree downward tilt for optimal viewing angles and reduced glare, enhancing your viewing experience and minimizing neck or eye strain. Constructed from premium cold-rolled steel with a durable black powder-coated finish, it ensures strong and secure support for your television.

2. Maklumat Keselamatan

AMARAN: Kegagalan membaca dan mengikuti arahan ini boleh mengakibatkan kecederaan peribadi yang serius, kerosakan harta benda atau waranti anda terbatal.

• Always ensure the wall structure can safely support the combined weight of the mount and the television.
• Jangan melebihi kapasiti berat maksimum 121 lbs (55 kg).
• Verify your TV's VESA pattern and weight are compatible with this mount before beginning installation.
• Gunakan peralatan keselamatan yang sesuai, termasuk perlindungan mata, semasa pemasangan.
• If drilling into wood studs, ensure the drill bit size is correct to prevent splitting.
• If drilling into concrete or brick, use the provided concrete anchors and ensure the drill bit is suitable for masonry.
• Never attempt to install the mount or lift the TV alone if it is too heavy. Seek assistance.
• Jauhkan semua bahagian kecil dan bahan pembungkusan daripada kanak-kanak.

3. Kandungan Pakej

Please check the package contents against the list below to ensure all parts are present and undamaged.

• TV Wall Mount (Wall Plate and TV Brackets)
• Kit Perkakasan Pemasangan (pelbagai skru, pencuci, spacer untuk TV dan dinding)
• Tahap Semangat
• Cable Management Ties (5x)
• Manual Arahan (dokumen ini)

4. Spesifikasi

5. Persediaan dan Pemasangan

The BONTEC TV wall mount is designed for quick and easy installation. Please follow these steps carefully.

5.1. Pemeriksaan Pra-Pemasangan

1. Sahkan Keserasian TV: Ensure your TV's VESA pattern and weight are within the mount's specifications (refer to Section 4).
2. Kenal pasti Jenis Dinding: Determine if you are mounting to wood studs or a concrete/brick wall. Different hardware is provided for each.
3. Cari Kedudukan Pemasangan: Choose a suitable location on your wall, considering viewing height and stud/wall integrity.

5.2. Memasang Pendakap TV pada TV

Attach the two vertical TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure the mounting hooks on the brackets are facing inward, towards the center of the TV, as shown in the correct installation method diagram below.

5.3. Mounting the Wall Plate

1. Tandai Lubang Gerudi: Hold the wall plate against the wall at your desired height. Use the included spirit level to ensure it is perfectly horizontal. Mark the drill hole locations through the plate's mounting holes.
2. Lubang gerudi: Drill pilot holes at the marked locations. For wood studs, use a smaller drill bit than the lag bolts. For concrete/brick, use a masonry drill bit and insert the plastic anchors flush with the wall surface.
3. Plat Dinding Selamat: Attach the wall plate to the wall using the lag bolts (for wood studs) or concrete anchors and screws (for concrete/brick). Tighten all screws securely.

5.4. Hanging the TV

Carefully lift the television with the attached brackets and hook them onto the wall plate. The simple 3-step installation design allows the TV to be fixed automatically. Pull the buckle to release the TV in seconds if required.

5.5. Pengurusan Kabel

Utilize the provided cable management ties to neatly organize and secure your TV cables, preventing tangles and maintaining a clean aesthetic. The mount's design provides enough space for cables behind the TV.

5.6. Video Pemasangan

For a visual guide, please refer to the official BONTEC installation video:

6. Arahan Operasi

The BONTEC Tilting TV Wall Mount allows for easy adjustment of your TV's viewsudut ing.

6.1. Tilting Your TV

This mount features a 10-degree downward tilt capability. To adjust the tilt, gently push the bottom of your TV forward or backward until you achieve the desired angle. This feature helps reduce glare from lights or windows and provides a more comfortable viewpengalaman dalam.

7. Penyelenggaraan

To ensure the longevity and safe operation of your BONTEC TV wall mount, follow these simple maintenance guidelines:

• Pemeriksaan biasa: Periodically (e.g., every 6-12 months) inspect all mounting screws and connections to ensure they remain tight and secure.
• Pembersihan: Clean the mount with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
• Penyingkiran habuk: Gently dust the mount and surrounding areas to prevent dust buildup.

8. Penyelesaian masalah

If you encounter any issues with your BONTEC TV wall mount, please refer to the following common problems and solutions:

9. Waranti dan Sokongan

BONTEC products are manufactured with quality and reliability in mind. For specific warranty information regarding your BONTEC Tilting TV Wall Mount (Model B08J2G8SWG), please refer to the warranty card included with your purchase or visit the official BONTEC website. For technical support, replacement parts, or any other inquiries, please contact BONTEC customer service through their official channels.

You can visit the BONTEC Store on Amazon for more information: BONTEC Store