WORKPRO 20V 4.0Ah Lithium-Ion Battery

pengenalan

Thank you for choosing the WORKPRO 20V 4.0Ah Lithium-Ion Battery. This battery is designed to provide reliable power for your WORKPRO 20V cordless power tools. This manual provides essential information for the safe and efficient use, maintenance, and troubleshooting of your battery.

Maklumat Keselamatan

Always observe the following safety precautions when using, charging, or storing your battery:

• Use only with compatible WORKPRO 20V chargers and tools.
• Do not expose the battery to water, moisture, or extreme temperatures.
• Elakkan litar pintas terminal bateri.
• Do not attempt to disassemble, open, or service the battery pack.
• Protect against incorrect voltage, overcharge, and internal overheating. The battery features built-in protection functions.
• Simpan bateri di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan sumber haba.
• Dispose of batteries responsibly according to local regulations. Do not dispose of in household waste.

Produk Selesaiview

The WORKPRO 20V 4.0Ah Lithium-Ion Battery is a high-quality, rechargeable power source for your cordless tools. It weighs approximately 700g and contains 10 individual 3.7V 18650-4000mAh Lithium-ion cells.

Bahagian hadapan view of the WORKPRO 20V 4.0Ah Lithium-Ion Battery, showcasing its compact design and power indicator lights.

An exploded diagram illustrating the internal components of the WORKPRO 20V 4.0Ah Lithium-Ion Battery, including individual battery cells and circuit board.

Penunjuk Kuasa

The battery is equipped with 4 LED indicator lights that show the real-time charge status. Simply press the power indicator button to check the remaining battery life.

Satu jarak dekat view of a finger pressing the power indicator button on the WORKPRO 20V 4.0Ah Lithium-Ion Battery, showing the illuminated charge status lights.

Persediaan dan Pemasangan

To install or remove the battery from your WORKPRO 20V cordless tool:

1. Ensure the tool is turned off and disconnected from any power source.
2. Jajarkan bateri dengan slot bateri pada alat.
3. Press the release button (if applicable) on the battery or tool, and slide the battery firmly into place until it clicks.
4. Untuk mengeluarkan, tekan butang pelepas dan luncurkan bateri keluar.

An image demonstrating the process of installing or removing the WORKPRO 20V 4.0Ah Lithium-Ion Battery from a compatible power tool by pressing the release button.

Keserasian

This battery is exclusively compatible with the WORKPRO 20V cordless power tool series, including but not limited to:

• latih tubi
• Pemacu Kesan
• Sepana Kesan
• Pengisar Sudut
• Gergaji Salingan
• Perapi Hedge
• Gergaji Tiang
• And other WORKPRO 20V tools (e.g., W004578AU, W122039AU, W125049AU, W125062AU, W159007AU, W159009AU).

The WORKPRO 20V 4.0Ah Lithium-Ion Battery centrally placed, surrounded by various compatible WORKPRO 20V cordless power tools such as drills, impact drivers, and hedge trimmers, illustrating its versatility.

Arahan Operasi

Mengecas Bateri

To charge your WORKPRO 20V 4.0Ah Lithium-Ion Battery:

1. Ensure you are using an official WORKPRO 20V battery charger.
2. Sambungkan pengecas ke salur keluar kuasa yang sesuai.
3. Slide the battery onto the charger until it is securely seated.
4. The charger's indicator lights will show the charging status. Refer to your charger's manual for specific light patterns.
5. Once fully charged, remove the battery from the charger. Do not leave the battery on the charger for extended periods after it is fully charged.

The battery has no memory effect, allowing it to be charged freely without needing to be fully discharged first.

Penyelenggaraan dan Penyimpanan

Proper maintenance and storage will extend the life of your battery:

• Pembersihan: Keep the battery terminals clean and free of debris. Use a dry cloth to wipe the battery exterior.
• Storan: For long-term storage, store the battery in a cool, dry place, ideally at room temperature (20-25°C or 68-77°F). Store the battery with a partial charge (around 50%) rather than fully charged or fully discharged.
• Suhu: Avoid storing or operating the battery in extreme hot or cold conditions.
• Penggunaan Biasa: If storing for extended periods, it is recommended to charge the battery to about 50% every 3-6 months to prevent deep discharge.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

For warranty information or technical support, please refer to the documentation included with your original purchase or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the official WORKPRO webtapak atau hubungi saluran sokongan pelanggan mereka.