MAYTRONICS DOLPHIN S200 IG
Manual Pengguna Pembersih Kolam Robotik Maytronics Dolphin S200
Model: DOLPHIN S200 IG
pengenalan
This manual provides essential information for the safe and efficient operation and maintenance of your Maytronics Dolphin S200 Robotic Pool Cleaner. Please read it thoroughly before first use.
Image: The Maytronics Dolphin S200 Robotic Pool Cleaner, a compact and efficient device designed for automated pool cleaning.
Persediaan
Setting up your Dolphin S200 is a straightforward process, as no assembly is required.
- Sambungan Kuasa: Plug the Dolphin S200 into a suitable power source. Ensure the power outlet is protected and appropriate for outdoor use.
- Penempatan di Kolam Renang: Carefully place the cleaner into the pool. Allow it to sink to the bottom.
- Initiate Cleaning: The cleaner is designed for automatic operation once powered on and submerged.
The unit operates on 24 Volts and is designed for ease of use with a touch control method.
Arahan Operasi
The Dolphin S200 is designed for automated cleaning cycles. Once initiated, it will navigate and clean your pool surfaces efficiently.
- Operasi automatik: The robotic cleaner will automatically clean the pool floor and walls.
- Kitaran Pembersihan: Allow the cleaner to complete its full cleaning cycle for optimal results.
- Pembuangan: Once the cycle is complete, carefully remove the cleaner from the pool using its handle.
Penyelenggaraan
Regular maintenance ensures the longevity and optimal performance of your Dolphin S200.
- Pembersihan Penapis: After each cleaning cycle, remove the filter from the top of the unit and empty any collected debris.
- Bilas: Rinse the filter thoroughly with a hose to remove fine particles before the next use.
- Storan: Store the device in a cool, dry place when not in use to protect its components.
- Pemeriksaan Pra-guna: Before and after each use, visually inspect the cleaner for any signs of damage or wear.
Menyelesaikan masalah
Bahagian ini menyediakan panduan untuk isu biasa yang mungkin anda hadapi.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cleaner not moving | Power supply issue, tangled cable, debris in brushes. | Check power connection, untangle cable, clean brushes. |
| Prestasi pembersihan yang lemah | Full or dirty filter, worn brushes. | Clean or replace filter, inspect and replace brushes if necessary. |
| Lebih bersih terapung | Air trapped inside, insufficient water saturation. | Submerge cleaner fully and gently shake to release trapped air. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | MAYTRONICS |
| Nama Model | DOLPHIN S200 IG |
| Nombor Model Item | DOLPHIN S200 IG |
| ASIN | B08C1B23FD |
| UPC | 724131497941 |
| Perhimpunan Diperlukan | Tidak |
| Kaedah Kawalan | Sentuh |
| Voltage | 24 Volt |
| Kecekapan | Jimat tenaga |
| Jenis Pemasangan | Robotik |
| bahan | ABS (Akrilonitril Butadiena Stirena), Plastik |
| Sumber Kuasa | Dikuasakan Bateri |
| Ciri Khas | Ringan |
| Berat Barang | 17 paun |
| Dimensi Pakej | 22 x 18 x 14 inci |
Maklumat Waranti
The Maytronics Dolphin S200 Robotic Pool Cleaner comes with a Waranti Terhad. For specific terms and conditions, please refer to the warranty card included with your product or contact Maytronics customer service.
Sokongan Pelanggan
For further assistance, technical support, or spare parts, please contact Maytronics customer service. Refer to the product packaging or the official Maytronics weblaman web untuk maklumat hubungan.
Anda juga boleh melawat halaman produk di Amazon untuk maklumat tambahan dan maklumat pelangganviews.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.