Crivit 3D Sensor Pedometer Instruction Manual

pengenalan

This manual provides essential information for the proper use and maintenance of your Crivit 3D Sensor Pedometer, Model 307012. This device is designed to track your physical activity, including steps, distance, and calories burned, using advanced 3D sensor technology. Please read these instructions carefully before using the pedometer to ensure optimal performance and longevity.

Ciri-ciri

• 3D Sensor Technology: Allows for accurate step counting regardless of placement (e.g., pocket, keychain).
• Paparan Berbilang Fungsi: Shows number of steps, distance, duration, speed, calorie consumption, fat burn, temperature, and current time.
• 7-Day Memory: Stores activity data for the past seven days.
• Tetapan Diperibadikan: Individual adjustment for body height, weight, and stride length for improved accuracy.
• Skrin LCD bercahaya belakang: Memberikan penglihatan yang jelas dalam pelbagai keadaan pencahayaan.
• Attachment Clip: For secure and convenient carrying.
• Bateri Termasuk: Operates with one CR2032 3V battery.

Produk Selesaiview

Image: The Crivit 3D Sensor Pedometer, featuring a red casing, an LCD screen, and an integrated clip for attachment. The display shows numerical data.

Persediaan

1. Pemasangan Bateri

1. Locate the battery compartment on the back of the pedometer.
2. Use a small coin or screwdriver to open the battery cover.
3. Insert one CR2032 3V battery with the positive (+) side facing up.
4. Pasang semula penutup bateri dan selamatkannya.

2. Tetapan Awal

Upon first use or after battery replacement, you will need to set your personal data for accurate tracking.

1. Tetapan Masa: Follow the on-screen prompts to set the current time (12-hour or 24-hour format).
2. Pemilihan Unit: Choose between metric (cm/kg) or imperial (inches/lbs) units.
3. Ketinggian: Masukkan ketinggian anda.
4. Berat: Enter your body weight.
5. Panjang Langkah: Measure and enter your average stride length. This can be estimated by walking 10 steps, measuring the total distance, and dividing by 10.
6. Confirm all settings to save.

Arahan Operasi

1. Hidupkan/Mati Kuasa

• The pedometer typically powers on automatically when activity is detected or a button is pressed.
• To conserve battery, the device may enter a sleep mode after a period of inactivity. Press any button to wake it up.

2. Navigating Display Modes

Use the mode button (usually labeled 'MODE' or similar) to cycle through different display screens:

• Langkah-langkah: Displays the total number of steps taken for the current day.
• Jarak: Shows the total distance covered.
• Kalori: Menunjukkan anggaran kalori yang dibakar.
• Tempoh: Displays the active time.
• Kelajuan: Shows your average speed.
• Fat Burn: Displays an estimate of fat burned.
• Suhu: Menunjukkan suhu persekitaran.
• Masa: Memaparkan masa semasa.

3. Resetting Daily Data

To reset the daily activity data (steps, distance, calories) to zero, typically press and hold the 'RESET' button for a few seconds while on the main display screen. Refer to the specific button layout on your device.

4. Mengakses Memori 7 Hari

The pedometer stores data for the past seven days. Use the 'MEMORY' or 'HISTORY' button (if available) to review previous days' activity. The display will typically show the date and the corresponding activity data.

Penyelenggaraan

Pembersihan

Wipe the pedometer with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device. Avoid submerging the pedometer in water.

Penggantian Bateri

When the battery indicator appears low or the display becomes dim, replace the CR2032 3V battery following the installation steps in the 'Setup' section. Dispose of used batteries responsibly according to local regulations.

Penyimpanan

Store the pedometer in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.

Menyelesaikan masalah

• Pedometer not counting steps:
  - Ensure the battery is correctly installed and charged.
  - Check if the device is securely attached or placed in a pocket where movement can be detected.
  - Verify that personal settings (stride length, height) are correctly entered.
• Paparan kosong atau malap:
  - Replace the battery.
  - Ensure the battery is inserted with correct polarity.
• Bacaan tidak tepat:
  - Re-enter your personal settings (height, weight, stride length).
  - Ensure the pedometer is not subjected to excessive shaking or vibrations that are not related to walking.
• Butang tidak bertindak balas:
  - Try removing and reinserting the battery to perform a soft reset.
  - Ensure the buttons are not obstructed.

Spesifikasi

Waranti dan Sokongan

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Crivit webtapak. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.