FNNEMGE 4000A 21800mAh Portable Jump Starter

pengenalan

This manual provides detailed instructions for the safe and effective use of your FNNEMGE 4000A 21800mAh Portable Jump Starter. This device is designed to jump-start 12V vehicles (up to 8.0L gasoline or 6.5L diesel engines) and also functions as a portable power bank and LED flashlight. Please read this manual thoroughly before operation and retain it for future reference.

Maklumat Keselamatan Penting

Your FNNEMGE Jump Starter is equipped with 10 intelligent safety mechanisms to ensure safe operation. These protections include:

• Perlindungan Kalis Percikan Api
• Zero Damage Protection
• Vol. Rendahtage Perlindungan
• Perlindungan Suhu Tinggi
• Perlindungan Litar pintas
• Perlindungan Polariti Terbalik
• Lebih Voltage Perlindungan
• Perlindungan Lebih Caj
• Perlindungan Caj Terbalik
• Perlindungan Arus Lebih

Always follow these general safety guidelines:

• Jangan rendam unit di dalam air.
• Jangan kendalikan unit jika ia rosak.
• Jauhkan daripada kanak-kanak.
• Pastikan pengudaraan yang betul semasa penggunaan dan pengecasan.
• Do not attempt to jump-start vehicles with voltages other than 12V.

Image: The FNNEMGE Jump Starter highlighting its 10 advanced safety protections, including spark-proof, zero damage, low voltage, suhu tinggi, litar pintas, kekutuban songsang, volum lebihtage, over charge, reverse charge, and overcurrent protection.

Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej anda:

• 1 x FNNEMGE Portable Jump Starter
• 1 x Smart Jumper Cable Set
• 1 x Kabel Pengecasan USB-C
• 1 x Manual Pengguna

Image: The FNNEMGE Portable Jump Starter, its smart jumper cables, and the USB-C charging cable, representing the complete package contents.

Produk Selesaiview

Komponen

The FNNEMGE Jump Starter features a compact design with essential components for vehicle starting and portable power.

• Unit Utama: Houses the battery, control circuitry, and display.
• Smart Jumper Cables: Equipped with safety features and indicators.
• Port Input/Output USB-C: For charging the unit and other devices.
• Port Keluaran USB: For charging other devices.
• Lampu suluh LED: Lampu bersepadu dengan pelbagai mod.

Paparan LCD Pintar

The 2.6-inch LCD screen provides comprehensive information about the device's status, including battery level, input/output indications, and temperature alerts.

Image: The FNNEMGE Jump Starter's 2.6-inch intelligent LCD display, clearly showing battery percentage, IN/OUT indicators, and temperature warnings for easy monitoring of operational status.

Setup: Charging the Jump Starter

Before initial use, fully charge the jump starter. It is recommended to recharge the unit after each use to maintain optimal performance.

1. Sambungkan kabel pengecas USB-C yang disediakan ke port input USB-C pada pemula lompat.
2. Connect the other end of the USB-C cable to a compatible USB wall adapter (not included) or a car charger.
3. The LCD display will show the charging status and battery percentage. Charge until the display indicates 100%.

The unit can also be charged via its USB-C port from a power source.

Arahan Operasi

1. Lompat Memulakan Kenderaan

This jump starter is designed for 12V vehicles with up to 8.0L gasoline or 6.5L diesel engines.

1. Langkah 1: Ensure the jump starter has sufficient charge (at least 50% recommended). Insert the blue end of the smart jumper cable into the jump starter's 12V output port. Ensure a secure connection.
2. Langkah 2: Sambungkan cl merahamp (+) to the positive terminal of your vehicle's battery and the black clamp (-) to the negative terminal. The smart cable's indicator light will show the connection status.
3. Langkah 3: Once the smart cable indicates a safe connection (usually a solid green light), return to your vehicle and start the engine.
4. Langkah 4: After the engine starts, immediately remove the jumper cables from the vehicle battery terminals, then disconnect the smart cable from the jump starter.

Image: A visual guide demonstrating the four steps to jump-start a car: 1. Insert the jump cable into the jump starter. 2. Connect the clamps to your car battery. 3. Start your car engine. 4. Remove the clamps to complete the operation.

Nota: If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. If the smart cable shows an error, refer to the troubleshooting section.

Image: The FNNEMGE Jump Starter in an engine bay, connected to a car battery, illustrating its capacity to deliver 4000A peak current, suitable for 8.0L gas and 6.5L diesel engines, providing 12 Volts for up to 60 starts.

2. Menggunakan sebagai Power Bank

The jump starter can charge various electronic devices via its USB output ports.

• Connect your device's USB charging cable to one of the jump starter's USB output ports (USB1 or USB-C).
• The LCD display will indicate "OUT" when charging is active.
• The 21800mAh capacity allows for multiple charges of smartphones, tablets, and other USB-powered devices.

Image: The FNNEMGE Jump Starter functioning as a 21800mAh power bank, connected via USB to charge a smartphone and wireless earbuds, demonstrating its versatility for various digital devices.

3. Menggunakan Lampu Suluh LED

The integrated LED flashlight offers three modes for different situations:

• Cahaya Biasa: Press the flashlight button once for continuous illumination.
• Mod SOS: Press the button a second time for an SOS signal (three short, three long, three short flashes).
• Mod Strob: Press the button a third time for a rapid strobe light.
• Press the button a fourth time to turn off the flashlight.

Image: A mechanic utilizing the FNNEMGE Jump Starter's LED flashlight to illuminate an engine bay, with icons indicating its three modes: normal light, SOS signal, and strobe light, useful for dark conditions or emergencies.

Penyelenggaraan

Penyimpanan

• Simpan starter lompat di tempat yang sejuk dan kering jauh dari cahaya matahari langsung.
• For long-term storage, ensure the unit is charged to at least 50% and recharge every 3-6 months to prevent battery degradation.
• Keep away from flammable materials and extreme temperatures.

Pembersihan

• Lap unit dengan kain lembut dan kering.
• Jangan gunakan bahan kimia atau pembersih kasar.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

FNNEMGE offers a Waranti 2 tahun for this product, along with lifetime technical support and 24/7 customer service.

If you encounter any questions or issues during use, please contact us via the email address provided in the user manual included with your product package.