LIORQUE Digital Alarm Clock with Wireless Charging

pengenalan

Thank you for choosing the LIORQUE Digital Alarm Clock with Wireless Charging. This device combines a clear LED display alarm clock with convenient Qi-standard wireless charging capabilities. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your product.

Maklumat Keselamatan

• Baca semua arahan dengan teliti sebelum digunakan dan simpan untuk rujukan pada masa hadapan.
• Jangan dedahkan peranti kepada air, lembapan atau suhu yang melampau.
• Use only the provided power adapter (DC 5V/1A) or a compatible power source.
• Avoid placing metal objects or magnetic cards on the wireless charging pad, as this may interfere with charging or damage the device.
• Do not attempt to disassemble or repair the device yourself. Contact customer support if service is required.
• Jauhkan daripada kanak-kanak.

Kandungan Pakej

Sila semak pakej untuk item berikut:

• 1 x LIORQUE Digital Alarm Clock
• 1 x Kabel USB Jenis-C
• 1 x Penyesuai Kuasa (DC 5V/1A)
• 1 x Manual Pengguna (dokumen ini)

Produk Selesaiview

Biasakan diri anda dengan komponen dan kawalan jam loceng anda.

Penerangan Imej: This image displays three views of the alarm clock. The front view shows the LED display with time, AM/PM indicator, alarm icon, snooze icon, and red/green light detectors. The back view highlights the control buttons: Time Setting, Alarm Setting, Minus (-), Plus (+), Speaker, Type-C port, and Reset hole. The top view shows the wireless charging platform with an anti-slip pad and metal surface.

Paparan Hadapan:

• Paparan Masa: Menunjukkan masa semasa.
• Penunjuk PG/PTG: Indicates morning or afternoon (for 12-hour format).
• Ikon Penggera: Lights up when the alarm is active.
• Snooze Icon (Zzz): Lights up when snooze is active.
• Red Light Detector: Menunjukkan status pengecasan.
• Green Light Detector: Menunjukkan status pengecasan.

Kawalan Belakang:

• Butang Tetapan Masa: Digunakan untuk memasuki mod tetapan masa.
• Alarm Setting Button: Used to enter alarm setting mode.
• Butang Tolak (-): Decreases values during setting.
• Butang Tambah (+): Increases values during setting.
• Pelabuhan Jenis-C: Untuk input kuasa.
• Set Semula Lubang: To reset the device (use a thin pin).

Permukaan Atas:

• Wireless Charging Platform: Place Qi-compatible devices here for charging. Features an anti-slip pad.
• Snooze/Dimmer Button (Integrated): Press the top surface to snooze the alarm or adjust display brightness.

Persediaan

1. Sambungan Kuasa

1. Connect the provided Type-C USB cable to the Type-C port on the back of the alarm clock.
2. Plug the other end of the USB cable into the included DC 5V/1A power adapter.
3. Plug the power adapter into a standard wall outlet. The display will light up.

Note: You can also connect the Type-C cable to a laptop or power bank for power, ensuring it provides 5V/1A output.

2. Bateri Sandaran

The alarm clock has a built-in button battery. This battery serves as a backup to save your time and alarm settings in case of a power outage. It does not power the display or alarm functions independently.

Arahan Operasi

1. Menetapkan Masa

1. Tekan dan tahan butang Penetapan Masa button on the back of the clock until the hour digits start flashing.
2. Gunakan + dan - butang untuk melaraskan jam.
3. Tekan ke Penetapan Masa butang sekali lagi untuk bertukar kepada pelarasan minit. Digit minit akan berkelip.
4. Gunakan + dan - butang untuk melaraskan minit.
5. Tekan ke Penetapan Masa button a third time to confirm the time and exit setting mode.

Format 12/24 Jam: While in time setting mode (hour flashing), press the Penetapan Masa button repeatedly to toggle between 12-hour and 24-hour display formats. The AM/PM indicator will appear for the 12-hour format.

2. Menetapkan Penggera

1. Tekan dan tahan butang Tetapan Penggera button on the back of the clock until the alarm hour digits start flashing. The alarm icon will appear on the display.
2. Gunakan + dan - butang untuk melaraskan jam penggera.
3. Tekan ke Tetapan Penggera button again to switch to alarm minute adjustment. The alarm minute digits will flash.
4. Gunakan + dan - butang untuk melaraskan minit penggera.
5. Tekan ke Tetapan Penggera button a third time to confirm the alarm time and exit setting mode. The alarm icon will remain lit, indicating the alarm is active.

Menghidupkan/Mematikan Penggera: Tekan sebentar Tetapan Penggera button to toggle the alarm on or off. When the alarm is on, the alarm icon will be displayed. When off, the icon will disappear.

3. Fungsi Tunda

Penerangan Imej: A hand is shown gently tapping the top surface of the LIORQUE Digital Alarm Clock. The clock display shows "8:30 AM" with a "Zzz" icon and a bell icon, indicating the alarm is active and snooze can be engaged by tapping the top.

When the alarm sounds, gently tap the top surface of the alarm clock. The alarm will pause for 9 minutes, and the "Zzz" icon will light up on the display. The alarm will sound again after 9 minutes. To completely turn off the alarm, press any button on the back of the clock.

4. Melaraskan Kecerahan Paparan

Penerangan Imej: This image illustrates the four adjustable brightness levels of the alarm clock's LED display. It shows the clock display in "Off", "Low Light", "Medium Light", and "Bright Light" modes, demonstrating the visual difference for each setting.

The display has 4 brightness levels: Off, Dim, Medium, and Bright. To adjust the brightness, gently tap the top surface of the alarm clock when the alarm is not sounding. Each tap will cycle through the brightness levels. Alternatively, you can press the dedicated dimmer button located on the bottom of the clock (if present, otherwise use the top tap function).

5. Pengecasan Tanpa Wayar

Penerangan Imej: This image demonstrates the universal compatibility of the alarm clock's 5W-Standard Qi wireless charging feature. It shows various smartphone models, including iPhones (11, XS/X, XR, 8/8 Plus) and Samsung Galaxy phones (Note 10/10+, S9/S9+, Note 8/5, S8/S8 Plus, S7/S7 Edge, S6/S6 Edge Plus), positioned around the alarm clock, indicating they are compatible with its wireless charging pad.

The LIORQUE Digital Alarm Clock features a Qi-standard wireless charging pad on its top surface. To charge your compatible device:

1. Ensure the alarm clock is powered on and connected to the power adapter.
2. Place your Qi-compatible smartphone (e.g., iPhone, Samsung Galaxy, Android phones supporting Qi) directly onto the center of the wireless charging platform on top of the clock.
3. The charging indicator light (red or green, depending on model/status) on the front display may illuminate to confirm charging has begun. Your phone's screen will also indicate charging.
4. For optimal charging, ensure your phone is centered on the pad and there are no foreign objects between the phone and the charging surface.

Note: Wireless charging supports 5W standard charging mode. Remove any thick phone cases that might interfere with charging.

Penyelenggaraan

• Bersihkan peranti dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut yang melelas.
• Keep the wireless charging pad free from dust and debris to ensure efficient charging.
• Store the clock in a cool, dry place when not in use for extended periods.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

LIORQUE products are designed and manufactured to the highest quality standards. For warranty information, technical support, or customer service inquiries, please refer to the contact information provided at the point of purchase or visit the official LIORQUE website. Please have your product model and ASIN (B08B34LQNT) ready when contacting support.