Klarus XT32

Manual Pengguna Lampu Suluh KLARUS XT32 1200 Lumens

Comprehensive instructions for the KLARUS XT32 flashlight, covering setup, operation, maintenance, and specifications.

pengenalan

Thank you for choosing the KLARUS XT32 1200 Lumens Flashlight. This manual provides detailed instructions to ensure safe and optimal use of your device. Please read it thoroughly before operation and retain it for future reference.

KLARUS XT32 Flashlight Kit Contents

Image: KLARUS XT32 Flashlight kit showing the flashlight, two 18650 batteries, a K2 charger, a holster, a lanyard, and a USB charging cable.

Kandungan Pakej

  • KLARUS XT32 Flashlight
  • 2 x KLARUS 18650 2600mAh Rechargeable Batteries
  • KLARUS K2 Dual-Slot Battery Charger
  • Sarung
  • Lanyard
  • Kabel Pengecas USB
  • Cincin O ganti
  • Manual Pengguna (dokumen ini)

Persediaan

1. Pemasangan Bateri

The KLARUS XT32 is designed to operate with 18650 or CR123A batteries. Ensure batteries are inserted with correct polarity.

  1. Tanggalkan penutup ekor lampu suluh lawan arah jam.
  2. Insert two 18650 batteries (or four CR123A batteries) with the positive (+) terminal facing towards the head of the flashlight.
  3. Screw the tail cap back on clockwise until securely tightened.
KLARUS XT32 Battery Compatibility

Image: The KLARUS XT32 flashlight shown alongside two 18650 batteries and four CR123A batteries, illustrating wide battery compatibility.

2. Battery Charging (for 18650 batteries)

Use the included KLARUS K2 charger to recharge the 18650 batteries.

  1. Connect the K2 charger to a power source using the provided USB cable.
  2. Insert the 18650 batteries into the charger slots, observing correct polarity.
  3. The charger's indicator lights will show the charging status. Refer to the K2 charger's specific manual for detailed indicator information.
  4. Once charging is complete, remove the batteries.

Arahan Operasi

The XT32 features a patented dual tail-switch and a side switch for versatile operation.

KLARUS XT32 Dual Tail-Switch and Side Switch Functions

Imej: Terperinci view of the KLARUS XT32's tail-switch and side switch, highlighting their respective functions for power, mode changes, and special modes.

Fungsi Tukar

  • Primary Tail Switch:
    • Momentary ON: Press and hold.
    • Constant ON/OFF: Click to turn on/off.
  • Mode Tail Switch:
    • One-Touch Strobe: Press and hold (when flashlight is off or on).
    • One-Touch Low: Click (when flashlight is off).
  • Suis Sisi:
    • ON/OFF: Click to turn on/off.
    • Mode Change: When on, click to cycle through brightness levels (Low-Medium-High-Turbo).
    • One-Touch Low: Press and hold (when flashlight is off).
    • One-Touch Turbo: Double-click (when flashlight is off or on).
    • Strobe: Triple-click (when flashlight is off or on).
    • SOS: Quadruple-click (when flashlight is off or on).
    • Lock-out Function: Press and hold the side switch for 5 seconds to lock/unlock.
    • Mode Memory: The flashlight will remember the last used brightness level (excluding Strobe/SOS).

Brightness Levels and Flash Modes

The XT32 offers four brightness levels and two special flash modes.

KLARUS XT32 Lighting Levels and ANSI Data

Image: Visual representation of the four lighting levels (Turbo, High, Medium, Low) and two flash modes (Strobe, SOS) of the KLARUS XT32, accompanied by a table of ANSI/NEMA FL1 standard data.

ANSI/NEMA FL1 Standard Data
ModANSI Lumens (LM)Masa jalan (h)Beam Intensity (cd)Jarak Rasuk (m)
Turbo120032500001000
tinggi400791000603
Sederhana1003422800301
rendah201204500134
Strob12006--
SOS100102--

Note: Data is based on KLARUS 18650 2600mAh batteries. Actual performance may vary depending on batteries and environmental conditions.

Intelligent Battery Capacity Indicator

The side switch features a built-in battery capacity indicator to monitor the remaining power.

KLARUS XT32 Battery Capacity Indicator

Image: The KLARUS XT32 flashlight with an overlay explaining the intelligent battery capacity indicator colors: Green (Over 70%), Orange (30-70%), Red (Less than 30%), Red Flashing (Less than 10%).

  • hijau: Battery capacity is over 70%.
  • Jingga: Battery capacity is between 30% and 70%.
  • merah: Battery capacity is less than 30%.
  • Merah Berkelip: Battery capacity is less than 10%. Recharge immediately.

Penyelenggaraan

  • Pembersihan: Bersihkan badan lampu suluh dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
  • Pelinciran: Sapukan gris silikon pada O-ring dan ulir secara berkala untuk mengekalkan kedap kalis air dan operasi yang lancar.
  • Penjagaan Bateri:
    • Tanggalkan bateri jika lampu suluh tidak akan digunakan untuk tempoh yang lama bagi mengelakkan kebocoran.
    • Simpan bateri di tempat yang sejuk dan kering.
    • Recharge 18650 batteries regularly, even if not fully depleted, to prolong their lifespan.
  • Penjagaan Lensa: Clean the lens with a lens cleaning cloth to remove dust or smudges. Avoid touching the lens directly.

Menyelesaikan masalah

If you encounter issues with your KLARUS XT32, please refer to the following common solutions:

  • Lampu suluh tidak menyala:
    • Pastikan bateri dimasukkan dengan polariti yang betul.
    • Check if batteries are fully charged.
    • Ketatkan penutup ekor dan kepala lampu suluh dengan kukuh.
    • Clean battery contacts with an alcohol swab if dirty.
    • Try different, known-good batteries.
  • Cahaya berkelip-kelip atau malap:
    • Batteries may be low; recharge or replace them.
    • Pastikan sesentuh bateri bersih dan bebas daripada kakisan.
    • Check for loose connections in the tail cap or head.
  • Switches are unresponsive:
    • Check if the lock-out function is activated (for side switch). Deactivate by pressing and holding the side switch for 5 seconds.
    • Pastikan penutup ekor diketatkan sepenuhnya.

If problems persist, please contact KLARUS customer support.

Spesifikasi

  • Jenama: KLARUS
  • model: XT32
  • LED: CREE XP-L HI V3
  • Output Maksimum: 1200 Lumen
  • Jarak Pancaran Maksimum: 1000 meter
  • Sumber Kuasa: 2 x 18650 batteries or 4 x CR123A batteries
  • Bekerja Voltage: 5-8.4V
  • Pemantul: Precision Manufactured Reflector
  • Kanta: Durable Tempered Glass with AR film plating for scratch resistance
  • Bahan: 6061-T6 Aerospace Aluminum Alloy, Mil-SPEC HAIII Anodizing
  • Penilaian Kalis Air: IPX8 (underwater 2 meters)
  • Rintangan Kesan: 1 meter
KLARUS XT32 Ingenious Design and Ergonomics

Imej: Meletup view of the KLARUS XT32 flashlight highlighting its durable tempered glass lens, 6061-T6 aerospace aluminum alloy construction, grooved texture design, big side switch with battery indicator, and patented dual-switch tail cap.

KLARUS XT32 Precision Reflector and 1000-Meter Beam

Image: The KLARUS XT32 flashlight demonstrating its 1000-meter ultra long-range beam, emphasizing the precision manufactured reflector for improved spotlight and illumination performance.

Waranti dan Sokongan

KLARUS products are manufactured to high-quality standards. For warranty information or technical support, please refer to the official KLARUS weblaman web atau hubungi pengedar sah anda. Sila simpan bukti pembelian anda untuk tuntutan jaminan.

Untuk bantuan lanjut, anda boleh melawati KLARUS Brand Store on Amazon.

Amaran Keselamatan

  • Jangan nyalakan lampu suluh terus ke mata. Pancaran yang kuat boleh menyebabkan gangguan penglihatan sementara atau kerosakan mata kekal.
  • Jauhkan daripada kanak-kanak.
  • Do not disassemble the sealed head of the flashlight, as this may damage the light and void the warranty.
  • Use only recommended batteries. Incorrect battery types or improper installation can cause damage or safety hazards.
  • Elakkan daripada mendedahkan lampu suluh kepada suhu yang melampau atau cahaya matahari langsung untuk tempoh yang lama.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.