ROBOTIME 3D Wooden Puzzle Sailing Ship Model Kit Instruction Manual

1. Pengenalan

This manual provides detailed instructions for assembling your ROBOTIME 3D Wooden Puzzle Sailing Ship model kit. Designed for individuals aged 8 and above, this kit offers an engaging construction experience without the need for glue or additional tools. Please read all instructions carefully before beginning assembly.

Figure 1: Completed Sailing Ship Model.

2. Komponen Termasuk

Before starting, verify that all components are present in your kit:

• Pre-cut Wooden Pieces: Various laser-cut wooden sheets containing all parts for the sailing ship.
• Manual Arahan: This guide, providing step-by-step assembly instructions.
• Kit Aksesori: May include string for rigging or other small decorative elements.

Gambar 2: Cthample of wooden puzzle pieces and assembly process.

3. Arahan Perhimpunan

Follow these steps carefully to assemble your 3D wooden puzzle sailing ship. No glue or special tools are required, as pieces are designed to interlock.

3.1 Persediaan

1. Buka Pembungkusan Komponen: Keluarkan semua kepingan kayu dan manual arahan dengan berhati-hati daripada pembungkusan.
2. Kenal pasti Bahagian: Refer to the diagrams in your included instruction booklet to identify each piece. Pieces are typically numbered or lettered on the sheets.
3. Sediakan Ruang Kerja: Pastikan anda mempunyai permukaan yang bersih, rata dan terang untuk bekerja.

3.2 Detaching Pieces

Gently press out each piece from its wooden sheet. If a piece is difficult to remove, use a small, blunt object (like the back of a spoon handle) to push it out from the reverse side. Avoid forcing pieces, as this may cause breakage.

3.3 Step-by-Step Construction

Follow the numbered steps and diagrams provided in your kit's specific instruction booklet. The general process involves:

• Perhimpunan asas: Begin by constructing the base and the lower hull sections of the ship.
• Hull Construction: Gradually build up the ship's hull by interlocking the side and deck pieces.
• Perincian: Attach smaller components such as the cabin, mast supports, and decorative elements.
• Mast and Sails: Assemble the masts and sails according to the diagrams. Pay close attention to the orientation of each part.
• Rigging (if applicable): If your model includes string for rigging, follow the instructions for threading and securing it to the masts and sails.
• Final Stand: Assemble the wave-like display stand and securely place the completed ship onto it.

Figure 3: Key components of the sailing ship model: Mast, Cabin, Body, and Base.

Petua Penting:

• Kesabaran adalah Kunci: Take your time with each step. Rushing can lead to errors or damage.
• Tekanan Lembut: Apply only gentle, even pressure when interlocking pieces.
• Rujuk Rajah: Always cross-reference the physical pieces with the diagrams in the instruction booklet.

4. Penyelenggaraan dan Penjagaan

To ensure the longevity and appearance of your ROBOTIME 3D Wooden Puzzle Sailing Ship, follow these care guidelines:

• Pembersihan: Habuk model dengan kerap dengan kain lembut dan kering atau berus berbulu lembut. Elakkan menggunakan pembersih air atau kimia, kerana ini boleh merosakkan kayu.
• penempatan: Display the model in a stable location away from direct sunlight, extreme temperatures, and high humidity. These conditions can cause the wood to warp, fade, or crack.
• Pengendalian: Handle the model carefully, especially delicate parts like masts and rigging. Avoid dropping or subjecting it to impact.

5. Penyelesaian masalah

Here are solutions to common issues you might encounter during assembly or with the finished model:

6. Spesifikasi Produk

• Jenama: ROBOTIME
• Nombor Model: d43992f3-f078-4136-89fa-2de80fa2abe2
• Dimensi Produk: Assembled model dimensions are approximately 7.9 x 1.8 x 4.7 inches (20.1 x 4.6 x 11.9 cm).
• Berat: 150 gram
• Bahan: kayu
• Bilangan Kepingan: 118 keping
• Umur Disyorkan: 8 tahun dan ke atas
• Perhimpunan Diperlukan: ya
• Objektif Pendidikan: Promotes concentration, patience, and ability to follow instructions.

Rajah 4: Dimensi produk dan spesifikasi utama.

7. Sokongan Pelanggan

For any questions, missing parts, or assistance with assembly, please contact ROBOTIME customer support. Refer to the contact information provided with your product packaging or visit the official ROBOTIME webtapak untuk pilihan sokongan.

Sumber Dalam Talian:

• Kedai Rasmi ROBOTIME: Lawati Kedai